[Fri Jul 27 10:41:03 2012] Detection parameters:
  Position = (305.4, 192.8) = 5 25 2.50 1 33 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 284.6 +/- 21.6
  Background counts = 29.1
  Rate = 0.007 +/- 0.0006

[Fri Jul 27 10:41:03 2012] Off-axis axis estimate = 7.67'
[Fri Jul 27 17:22:10 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 17:22:10 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Fri Jul 27 17:22:10 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.917
[Fri Jul 27 17:22:10 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 10.27"
[Fri Jul 27 20:12:52 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src16.ximg exists
[Fri Jul 27 20:12:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src16.csv
[Fri Jul 27 20:12:52 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri Jul 27 20:12:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src16.csv
[Fri Jul 27 20:12:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:12:53 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri Jul 27 20:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Fri Jul 27 20:12:53 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Jul 27 20:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Fri Jul 27 20:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:13:43 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 87 at 13.171448 pixels away
[Fri Jul 27 20:13:44 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 20:13:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 20:13:44 2012] Assessing source extent using major
[Fri Jul 27 20:13:44 2012] Source does appear to be extended
[Fri Jul 27 20:13:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 01:19:15 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 01:19:15 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Sat Jul 28 01:19:15 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.917
[Sat Jul 28 01:19:15 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 10.27"
[Sat Jul 28 03:55:29 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src15.ximg exists
[Sat Jul 28 03:55:29 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Jul 28 03:55:29 2012] Fit fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src15 appears to have run properly
[Sat Jul 28 03:55:30 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Jul 28 03:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat Jul 28 03:55:30 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Jul 28 03:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat Jul 28 03:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:56:22 2012] Spatial fit model total counts = 465.871000, observed total counts = 460.000000
[Sat Jul 28 03:56:22 2012] Offset between fit and detection position for source 87 = 0.033210 pixels
[Sat Jul 28 03:56:22 2012] 461.475000 total counts/ 293.899000 bgd. counts: snr = 9.774910
Spatial fit parameters:
  Offset between fit and detection position for source 87 = 0.033210 pixels
  Position = (305.4, 192.8) = 5 25 2.50 1 33 3.1
  Extent = 6.0" x 4.1", rotation angle = 0
  Source counts = 167.6 +/- 21.5
  Background counts = 293.9
  Rate = 0.003 +/- 0.0003
[Sat Jul 28 03:56:22 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 03:56:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 03:56:22 2012] Assessing source extent using major
[Sat Jul 28 03:56:22 2012] Source does appear to be extended
[Sat Jul 28 03:56:22 2012] Computing asymmetry using major and minor axis, asym = 1.46
[Sat Jul 28 09:01:57 2012] XMMSAS src. selection expression = ellipse(26523.305444, 16724.765109, 360.555947, 246.587091, 0.000000, X, Y)
[Sat Jul 28 09:01:57 2012] Writing source region out to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src87_src.reg
[Sat Jul 28 09:01:57 2012] Extracting stamp from image fullrun_mos2_xmm0554610101_pi300-10000_cl_sm2.00.img.gz, (285, 172) - (326, 214)
[Sat Jul 28 09:01:57 2012] XMMSAS bgd. selection expression = annulus(26523.305444, 16724.765109, 600.926579, 1201.853158, X, Y) && !ellipse(25013.140260, 18326.156200, 628.393618, 437.309613, 10.156100, X, Y)
[Sat Jul 28 09:01:57 2012] Writing fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src87.gif
[Sat Jul 28 09:08:32 2012] Mean detx,y = (-571.20, -10672.84) 
[Sat Jul 28 09:08:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 09:08:44 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 09:08:44 2012] Setting source spectrum file to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Sat Jul 28 09:08:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Sat Jul 28 11:14:37 2012] Updating aperture counts using extracted products
[Sat Jul 28 11:14:37 2012] Error reading totcts from fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Sat Jul 28 11:14:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:14:41 2012] Using photon index=1.80, rate=0.00263, arf fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src87.arf
[Sat Jul 28 11:14:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:14:41 2012] Updating source flux to 6.8e-14