[Fri Jul 27 10:41:03 2012] Detection parameters:
  Position = (257.7, 206.9) = 5 25 16.35 1 34 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.9 +/- 20.0
  Background counts = 28.9
  Rate = 0.005 +/- 0.0005

[Fri Jul 27 10:41:03 2012] Off-axis axis estimate = 7.26'
[Fri Jul 27 17:22:10 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 17:22:10 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Fri Jul 27 17:22:10 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.138
[Fri Jul 27 17:22:10 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 10.06"
[Fri Jul 27 20:12:52 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src24.ximg exists
[Fri Jul 27 20:12:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src24.csv
[Fri Jul 27 20:12:52 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri Jul 27 20:12:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src24.csv
[Fri Jul 27 20:12:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:12:53 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri Jul 27 20:12:53 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri Jul 27 20:12:53 2012] Fit fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Fri Jul 27 20:13:44 2012] Spatial fit model total counts = 1287.580000, observed total counts = 1271.000000
[Fri Jul 27 20:13:44 2012] Offset between fit and detection position for source 80 = 8.573028 pixels
[Fri Jul 27 20:13:44 2012] 1215.010000 total counts/ 610.865000 bgd. counts: snr = 24.443791
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 8.573028 pixels
  Position = (252.1, 213.5) = 5 25 17.96 1 34 33.0
  Extent = 20.1 (20.1-40.2)", rotation angle = 0
  Source counts = 604.1 +/- 34.9
  Background counts = 610.9
  Rate = 0.009 +/- 0.0005
[Fri Jul 27 20:13:44 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 20:13:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 20:13:44 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 20:13:44 2012] Source does appear to be extended
[Fri Jul 27 20:13:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 20:13:44 2012] Source is confused with source 74
[Sat Jul 28 01:19:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 01:19:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 28 01:19:15 2012] Initial guess for spatial extent in simple fitting = 20.12"
[Sat Jul 28 01:19:15 2012] source mask rpix=4.6, npix_max = 105, mask sum = 110, frac = 1.047
[Sat Jul 28 01:19:15 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 20.12"
[Sat Jul 28 03:55:29 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src22.ximg exists
[Sat Jul 28 03:55:29 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat Jul 28 03:55:29 2012] Fit fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src22 appears to have run properly
[Sat Jul 28 03:55:30 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat Jul 28 03:55:30 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat Jul 28 03:55:30 2012] Fit fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sat Jul 28 03:56:22 2012] Warning, spatial fit 22 centroid is now closest to src. 83
[Sat Jul 28 03:56:22 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 03:56:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 03:56:22 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 03:56:22 2012] Source does appear to be extended
[Sat Jul 28 03:56:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 09:01:57 2012] XMMSAS src. selection expression = ellipse(21887.586000, 18523.540000, 1207.128035, 1207.128035, 0.000000, X, Y)
[Sat Jul 28 09:01:57 2012] Writing source region out to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src80_src.reg
[Sat Jul 28 09:01:57 2012] Extracting stamp from image fullrun_mos2_xmm0554610101_pi300-10000_cl_sm2.00.img.gz, (183, 144) - (322, 283)
[Sat Jul 28 09:01:57 2012] XMMSAS bgd. selection expression = annulus(21887.586000, 18523.540000, 2011.880058, 4023.760116, X, Y) && !ellipse(18849.532578, 21876.921768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22595.384644, 17434.650208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24136.012435, 20223.863936, 532.781160, 338.708200, 27.147692, X, Y) && !ellipse(25013.140260, 18326.156200, 628.393618, 437.309613, 10.156100, X, Y) && !ellipse(26727.674896, 19068.649490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23397.813600, 22933.522400, 436.381613, 436.381613, 0.000000, X, Y) && !ellipse(23813.159200, 17247.290900, 515.331215, 515.331215, 0.000000, X, Y) && !ellipse(22416.855164, 20728.187500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25745.476013, 21335.764404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18559.601477, 16769.230189, 626.360654, 226.287225, 44.446511, X, Y)
[Sat Jul 28 09:01:57 2012] Writing fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src80.gif
[Sat Jul 28 09:10:29 2012] Mean detx,y = (4079.44, -9671.92) 
[Sat Jul 28 09:10:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 09:10:57 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 09:10:57 2012] Setting source spectrum file to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Sat Jul 28 09:10:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Sat Jul 28 11:14:37 2012] Updating aperture counts using extracted products
[Sat Jul 28 11:14:37 2012] Error reading totcts from fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Sat Jul 28 11:14:42 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:14:42 2012] Using photon index=1.80, rate=0.0095, arf fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src80.arf
[Sat Jul 28 11:14:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:14:42 2012] Updating source flux to 1.7e-13
[Sat Jul 28 11:18:54 2012] Flag c found in src. 80 procflags, skipping spectral fitting