[Fri Jul 27 10:41:02 2012] Detection parameters:
  Position = (355.0, 151.5) = 5 24 48.12 1 30 3.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.0 +/- 11.2
  Background counts = 24.3
  Rate = 0.0008 +/- 0.0002

[Fri Jul 27 10:41:03 2012] Off-axis axis estimate = 11.41'
[Fri Jul 27 17:22:10 2012] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 17:22:10 2012] Initial guess for spatial extent in simple fitting = 12.14"
[Fri Jul 27 17:22:10 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.970
[Fri Jul 27 17:22:10 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 12.14"
[Fri Jul 27 20:12:53 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src85.ximg exists
[Fri Jul 27 20:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src85.csv
[Fri Jul 27 20:12:53 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src85_1.ximg exists
[Fri Jul 27 20:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src85.csv
[Fri Jul 27 20:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:12:55 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Fri Jul 27 20:12:55 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Fri Jul 27 20:12:55 2012] Fit fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Fri Jul 27 20:13:44 2012] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 70 at 15.772516 pixels away
[Fri Jul 27 20:13:44 2012] Source 70 is offset by -0.836855 and 5.774246 pixels which is larger than
2 X fitted extent = 1.417664 x 1.417664, not incorporating fit results
[Fri Jul 27 20:13:44 2012] Warning, spatial fit 85 centroid is now closest to src. 56
[Fri Jul 27 20:13:44 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 20:13:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 20:13:44 2012] Assessing source extent using major
[Fri Jul 27 20:13:44 2012] Source does appear to be extended
[Fri Jul 27 20:13:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 01:19:15 2012] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 01:19:15 2012] Initial guess for spatial extent in simple fitting = 12.14"
[Sat Jul 28 01:19:15 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.970
[Sat Jul 28 01:19:15 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 12.14"
[Sat Jul 28 03:55:30 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src77.ximg exists
[Sat Jul 28 03:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src77.csv
[Sat Jul 28 03:55:30 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src77_1.ximg exists
[Sat Jul 28 03:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src77.csv
[Sat Jul 28 03:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:55:31 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Sat Jul 28 03:55:31 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Sat Jul 28 03:55:31 2012] Fit fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Sat Jul 28 03:56:22 2012] Spatial fit model total counts = 318.632000, observed total counts = 318.000000
[Sat Jul 28 03:56:22 2012] Offset between fit and detection position for source 70 = 0.248562 pixels
[Sat Jul 28 03:56:22 2012] 314.965100 total counts/ 282.315000 bgd. counts: snr = 1.943200
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 0.248562 pixels
  Position = (355.2, 151.6) = 5 24 48.06 1 30 3.9
  Extent = 4.6 (3.0-8.8)", rotation angle = 0
  Source counts = 32.7 +/- 17.7
  Background counts = 282.3
  Rate = 0.0005 +/- 0.0003
[Sat Jul 28 03:56:22 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 03:56:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 03:56:22 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 03:56:22 2012] Source does appear to be extended
[Sat Jul 28 03:56:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 09:01:59 2012] XMMSAS src. selection expression = ellipse(30856.320200, 13141.934800, 277.419608, 277.419608, 0.000000, X, Y)
[Sat Jul 28 09:01:59 2012] Writing source region out to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src70_src.reg
[Sat Jul 28 09:01:59 2012] Extracting stamp from image fullrun_mos2_xmm0554610101_pi300-10000_cl_sm2.00.img.gz, (339, 136) - (371, 168)
[Sat Jul 28 09:01:59 2012] XMMSAS bgd. selection expression = annulus(30856.320200, 13141.934800, 462.366013, 924.732027, X, Y) && !ellipse(29989.537689, 12341.419891, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 09:01:59 2012] Writing fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src70.gif
[Sat Jul 28 09:25:45 2012] Mean detx,y = (-5326.07, -13694.91) 
[Sat Jul 28 09:25:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 09:25:52 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 09:25:53 2012] Setting source spectrum file to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sat Jul 28 09:25:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Sat Jul 28 11:11:32 2012] Not generating rmf since there are only 32 counts
[Sat Jul 28 11:11:32 2012] rmf not generated due to insufficient counts
[Sat Jul 28 11:14:40 2012] Updating aperture counts using extracted products
[Sat Jul 28 11:14:40 2012] Error reading totcts from fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sat Jul 28 11:14:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:14:44 2012] Using photon index=1.80, rate=0.000513, arf fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src70.arf
[Sat Jul 28 11:14:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:14:44 2012] Updating source flux to 2.1e-14
[Sat Jul 28 11:18:54 2012] Flag b found in src. 70 procflags, skipping spectral fitting
[Sat Jul 28 11:18:54 2012] Source 70 has fewer than 100.000000 counts, skipping spectral fitting