[Fri Jul 27 10:41:02 2012] Detection parameters:
  Position = (501.7, 280.2) = 5 24 5.55 1 39 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.2 +/- 12.7
  Background counts = 23.8
  Rate = 0.001 +/- 0.0002

[Fri Jul 27 10:41:03 2012] Off-axis axis estimate = 14.80'
[Fri Jul 27 17:22:10 2012] Using EEF radius (= 13.83 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 17:22:10 2012] Initial guess for spatial extent in simple fitting = 13.83"
[Fri Jul 27 17:22:10 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.905
[Fri Jul 27 17:22:10 2012] Giving source the simple spatial ID 78 for pass 0, mean size = 13.83"
[Fri Jul 27 20:12:53 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src78.ximg exists
[Fri Jul 27 20:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src78.csv
[Fri Jul 27 20:12:53 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src78_1.ximg exists
[Fri Jul 27 20:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src78.csv
[Fri Jul 27 20:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:12:55 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Fri Jul 27 20:12:55 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Fri Jul 27 20:12:55 2012] Fit fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src78 appears to have run properly
[Fri Jul 27 20:13:44 2012] Warning: source 78 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 13.874567 pixels away
[Fri Jul 27 20:13:44 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 20:13:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 20:13:44 2012] Assessing source extent using major
[Fri Jul 27 20:13:44 2012] Source does appear to be extended
[Fri Jul 27 20:13:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 01:19:15 2012] Using EEF radius (= 13.83 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 01:19:15 2012] Initial guess for spatial extent in simple fitting = 13.83"
[Sat Jul 28 01:19:15 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.905
[Sat Jul 28 01:19:15 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 13.83"
[Sat Jul 28 03:55:29 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src71.ximg exists
[Sat Jul 28 03:55:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src71.csv
[Sat Jul 28 03:55:29 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src71_1.ximg exists
[Sat Jul 28 03:55:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src71.csv
[Sat Jul 28 03:55:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:55:30 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Sat Jul 28 03:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src71.csv
[Sat Jul 28 03:55:30 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Sat Jul 28 03:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src71.csv
[Sat Jul 28 03:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:56:22 2012] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 14.119696 pixels away
[Sat Jul 28 03:56:22 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 03:56:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 03:56:22 2012] Assessing source extent using major
[Sat Jul 28 03:56:22 2012] Source does appear to be extended
[Sat Jul 28 03:56:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 09:01:59 2012] XMMSAS src. selection expression = ellipse(43601.458710, 24328.441742, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 09:01:59 2012] Writing source region out to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src57_src.reg
[Sat Jul 28 09:01:59 2012] Extracting stamp from image fullrun_mos2_xmm0554610101_pi300-10000_cl_sm2.00.img.gz, (464, 243) - (539, 318)
[Sat Jul 28 09:01:59 2012] XMMSAS bgd. selection expression = annulus(43601.458710, 24328.441742, 1087.500000, 2175.000000, X, Y) && !ellipse(43007.164200, 23536.020200, 433.272012, 223.511206, 98.791380, X, Y) && !ellipse(43260.523743, 21465.794464, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 09:01:59 2012] Writing fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src57.gif
[Sat Jul 28 09:24:09 2012] Mean detx,y = (-16499.23, -1000.20) 
[Sat Jul 28 09:24:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 09:24:24 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 09:24:24 2012] Setting source spectrum file to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sat Jul 28 09:24:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Sat Jul 28 11:10:49 2012] Not generating rmf since there are only 70 counts
[Sat Jul 28 11:10:49 2012] rmf not generated due to insufficient counts
[Sat Jul 28 11:14:40 2012] Updating aperture counts using extracted products
[Sat Jul 28 11:14:40 2012] Error reading totcts from fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sat Jul 28 11:14:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:14:44 2012] Using photon index=1.80, rate=0.0011, arf fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src57.arf
[Sat Jul 28 11:14:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:14:44 2012] Updating source flux to 3.5e-14
[Sat Jul 28 11:18:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting