[Fri Jul 27 10:41:01 2012] Detection parameters:
  Position = (389.9, 349.6) = 5 24 37.98 1 44 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.1 +/- 11.8
  Background counts = 26.6
  Rate = 0.001 +/- 0.0003

[Fri Jul 27 10:41:03 2012] Off-axis axis estimate = 7.60'
[Fri Jul 27 17:22:10 2012] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 17:22:10 2012] Initial guess for spatial extent in simple fitting = 10.23"
[Fri Jul 27 17:22:10 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.923
[Fri Jul 27 17:22:10 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 10.23"
[Fri Jul 27 20:12:52 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src67.ximg exists
[Fri Jul 27 20:12:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src67.csv
[Fri Jul 27 20:12:52 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src67_1.ximg exists
[Fri Jul 27 20:12:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src67.csv
[Fri Jul 27 20:12:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:12:54 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Fri Jul 27 20:12:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src67.csv
[Fri Jul 27 20:12:54 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Fri Jul 27 20:12:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src67.csv
[Fri Jul 27 20:12:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:13:44 2012] Warning, spatial fit 67 centroid is now closest to src. 25
[Fri Jul 27 20:13:44 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 20:13:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 20:13:44 2012] Assessing source extent using major
[Fri Jul 27 20:13:44 2012] Source does appear to be extended
[Fri Jul 27 20:13:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 01:19:15 2012] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 01:19:15 2012] Initial guess for spatial extent in simple fitting = 10.23"
[Sat Jul 28 01:19:15 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.923
[Sat Jul 28 01:19:15 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 10.23"
[Sat Jul 28 03:55:29 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src61.ximg exists
[Sat Jul 28 03:55:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src61.csv
[Sat Jul 28 03:55:29 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src61_1.ximg exists
[Sat Jul 28 03:55:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src61.csv
[Sat Jul 28 03:55:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:55:30 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Sat Jul 28 03:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src61.csv
[Sat Jul 28 03:55:30 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Sat Jul 28 03:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src61.csv
[Sat Jul 28 03:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:56:22 2012] Warning, spatial fit 61 centroid is now closest to src. 25
[Sat Jul 28 03:56:22 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 03:56:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 03:56:22 2012] Assessing source extent using major
[Sat Jul 28 03:56:22 2012] Source does appear to be extended
[Sat Jul 28 03:56:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 09:01:58 2012] XMMSAS src. selection expression = ellipse(33876.309418, 30362.731262, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 09:01:58 2012] Writing source region out to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src34_src.reg
[Sat Jul 28 09:01:58 2012] Extracting stamp from image fullrun_mos2_xmm0554610101_pi300-10000_cl_sm2.00.img.gz, (352, 312) - (427, 387)
[Sat Jul 28 09:01:58 2012] XMMSAS bgd. selection expression = annulus(33876.309418, 30362.731262, 1087.500000, 2175.000000, X, Y) && !ellipse(35870.859200, 32049.557800, 284.202408, 284.202408, 0.000000, X, Y) && !ellipse(36801.466705, 28122.640564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33265.092468, 30996.502686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34377.547089, 31989.934998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33808.210571, 28050.569794, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 09:01:58 2012] Writing fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src34.gif
[Sat Jul 28 09:21:44 2012] Mean detx,y = (-6077.32, 3773.47) 
[Sat Jul 28 09:21:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 09:21:58 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 09:21:58 2012] Setting source spectrum file to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat Jul 28 09:21:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sat Jul 28 11:09:32 2012] Not generating rmf since there are only 63 counts
[Sat Jul 28 11:09:32 2012] rmf not generated due to insufficient counts
[Sat Jul 28 11:14:40 2012] Updating aperture counts using extracted products
[Sat Jul 28 11:14:40 2012] Error reading totcts from fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat Jul 28 11:14:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:14:43 2012] Using photon index=1.80, rate=0.00141, arf fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src34.arf
[Sat Jul 28 11:14:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:14:43 2012] Updating source flux to 2.5e-14
[Sat Jul 28 11:18:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting