[Fri Jul 27 10:40:59 2012] Detection parameters:
  Position = (460.8, 268.0) = 5 24 17.41 1 38 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3769.0 +/- 73.9
  Background counts = 23.4
  Rate = 0.06 +/- 0.001

[Fri Jul 27 10:41:03 2012] Off-axis axis estimate = 11.98'
[Fri Jul 27 17:22:10 2012] Using EEF radius (= 12.42 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 17:22:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 17:22:10 2012] Initial guess for spatial extent in simple fitting = 12.42"
[Fri Jul 27 17:22:10 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.933
[Fri Jul 27 17:22:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.42"
[Fri Jul 27 20:12:51 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 27 20:12:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 20:12:51 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 27 20:12:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 20:12:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:12:53 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 27 20:12:53 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 27 20:12:53 2012] Fit fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 27 20:13:43 2012] Spatial fit model total counts = 4129.260000, observed total counts = 4136.000000
[Fri Jul 27 20:13:43 2012] Offset between fit and detection position for source 3 = 0.266479 pixels
[Fri Jul 27 20:13:43 2012] 4158.510000 total counts/ 1461.350000 bgd. counts: snr = 70.555291
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.266479 pixels
  Position = (460.6, 268.0) = 5 24 17.49 1 38 30.1
  Extent = 6.1 (5.9-6.3)", rotation angle = 0
  Source counts = 2697.2 +/- 64.5
  Background counts = 1461.3
  Rate = 0.04 +/- 0.001
[Fri Jul 27 20:13:44 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 20:13:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 20:13:44 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 20:13:44 2012] Source does appear to be extended
[Fri Jul 27 20:13:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 01:19:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 01:19:14 2012] Initial guess for spatial extent in simple fitting = 6.11"
[Sat Jul 28 01:19:14 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.827
[Sat Jul 28 01:19:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.11"
[Sat Jul 28 03:55:29 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 28 03:55:29 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 28 03:55:29 2012] Fit fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Jul 28 03:55:30 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 28 03:55:30 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 28 03:55:30 2012] Fit fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 28 03:56:22 2012] Spatial fit model total counts = 3662.220000, observed total counts = 3667.000000
[Sat Jul 28 03:56:22 2012] Offset between fit and detection position for source 3 = 0.019213 pixels
[Sat Jul 28 03:56:22 2012] 3709.480000 total counts/ 1224.640000 bgd. counts: snr = 71.005863
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.019213 pixels
  Position = (460.5, 268.0) = 5 24 17.50 1 38 30.0
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 2484.8 +/- 60.9
  Background counts = 1224.6
  Rate = 0.04 +/- 0.001
[Sat Jul 28 03:56:22 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 03:56:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 03:56:22 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 03:56:22 2012] Source does appear to be extended
[Sat Jul 28 03:56:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 09:01:57 2012] Counts = 2484.840000, rescaling region sizes by 2.000000
[Sat Jul 28 09:01:57 2012] XMMSAS src. selection expression = ellipse(40019.197400, 23264.803200, 656.979619, 656.979619, 0.000000, X, Y)
[Sat Jul 28 09:01:57 2012] Writing source region out to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src3_src.reg
[Sat Jul 28 09:01:57 2012] Extracting stamp from image fullrun_mos2_xmm0554610101_pi300-10000_cl_sm2.00.img.gz, (423, 230) - (498, 306)
[Sat Jul 28 09:01:57 2012] XMMSAS bgd. selection expression = annulus(40019.197400, 23264.803200, 2189.932063, 4379.864126, X, Y) && !ellipse(39188.009831, 26149.035751, 371.679029, 326.857155, 98.091894, X, Y) && !ellipse(43007.164200, 23536.020200, 433.272012, 223.511206, 98.791380, X, Y) && !ellipse(36801.466705, 28122.640564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38046.006378, 26979.376984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43260.523743, 21465.794464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37299.377625, 18737.495651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43601.458710, 24328.441742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40107.168820, 21414.785400, 440.583213, 440.583213, 0.000000, X, Y)
[Sat Jul 28 09:01:57 2012] Writing fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src3.gif
[Sat Jul 28 09:02:03 2012] Mean detx,y = (-13144.21, -2458.32) 
[Sat Jul 28 09:02:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 09:02:26 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 09:02:26 2012] Setting source spectrum file to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 28 09:02:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jul 28 11:14:36 2012] Updating aperture counts using extracted products
[Sat Jul 28 11:14:36 2012] Error reading totcts from fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 28 11:14:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:14:40 2012] Using photon index=1.80, rate=0.0391, arf fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src3.arf
[Sat Jul 28 11:14:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:14:41 2012] Updating source flux to 9.6e-13
[Sat Jul 28 11:24:46 2012] Reading fit data from xmm0554610101/analysis//spectral/fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src3_pl.csv
[Sat Jul 28 11:24:46 2012] Spectral fit parameter nH value = 3.53193e+21
[Sat Jul 28 11:24:46 2012] Spectral fit parameter PhoIndex value = 3.97046
[Sat Jul 28 11:24:46 2012] Failed to get F(0.3-8.0) from xmm0554610101/analysis//spectral/fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Jul 28 11:24:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:24:46 2012] Using Nh = 3.5e+21, photon index=3.97, rate=0.0391, arf fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src3.arf
[Sat Jul 28 11:24:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:24:46 2012] Updating source flux to 6.3e-13