[Fri Jul 27 10:41:00 2012] Detection parameters:
  Position = (255.3, 404.3) = 5 25 17.04 1 48 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 333.7 +/- 23.2
  Background counts = 17.4
  Rate = 0.005 +/- 0.0004

[Fri Jul 27 10:41:03 2012] Off-axis axis estimate = 8.29'
[Fri Jul 27 17:22:10 2012] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 17:22:10 2012] Initial guess for spatial extent in simple fitting = 10.57"
[Fri Jul 27 17:22:10 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.048
[Fri Jul 27 17:22:10 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 10.57"
[Fri Jul 27 20:12:52 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src20.ximg exists
[Fri Jul 27 20:12:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src20.csv
[Fri Jul 27 20:12:52 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Jul 27 20:12:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src20.csv
[Fri Jul 27 20:12:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:12:53 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Jul 27 20:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri Jul 27 20:12:53 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Jul 27 20:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri Jul 27 20:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:13:43 2012] Warning, spatial fit 20 centroid is now closest to src. 17
[Fri Jul 27 20:13:44 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 20:13:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 20:13:44 2012] Assessing source extent using major
[Fri Jul 27 20:13:44 2012] Source does appear to be extended
[Fri Jul 27 20:13:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 01:19:15 2012] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 01:19:15 2012] Initial guess for spatial extent in simple fitting = 10.57"
[Sat Jul 28 01:19:15 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.048
[Sat Jul 28 01:19:15 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 10.57"
[Sat Jul 28 03:55:29 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src19.ximg exists
[Sat Jul 28 03:55:29 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Jul 28 03:55:29 2012] Fit fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_src19 appears to have run properly
[Sat Jul 28 03:55:30 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Jul 28 03:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Jul 28 03:55:30 2012] fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Jul 28 03:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Jul 28 03:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:56:22 2012] Spatial fit model total counts = 542.378000, observed total counts = 494.000000
[Sat Jul 28 03:56:22 2012] Offset between fit and detection position for source 12 = 0.106306 pixels
[Sat Jul 28 03:56:22 2012] 526.555000 total counts/ 358.766000 bgd. counts: snr = 8.858452
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.106306 pixels
  Position = (255.3, 404.2) = 5 25 17.05 1 48 22.5
  Extent = 4.6" x 3.9", rotation angle = 30
  Source counts = 167.8 +/- 22.9
  Background counts = 358.8
  Rate = 0.003 +/- 0.0004
[Sat Jul 28 03:56:22 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 03:56:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 03:56:22 2012] Assessing source extent using major
[Sat Jul 28 03:56:22 2012] Source does appear to be extended
[Sat Jul 28 03:56:22 2012] Computing asymmetry using major and minor axis, asym = 1.18
[Sat Jul 28 09:01:57 2012] XMMSAS src. selection expression = ellipse(22160.730665, 35114.117505, 273.057018, 232.063045, 30.172190, X, Y)
[Sat Jul 28 09:01:57 2012] Writing source region out to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src12_src.reg
[Sat Jul 28 09:01:57 2012] Extracting stamp from image fullrun_mos2_xmm0554610101_pi300-10000_cl_sm2.00.img.gz, (240, 388) - (271, 420)
[Sat Jul 28 09:01:57 2012] XMMSAS bgd. selection expression = annulus(22160.730665, 35114.117505, 455.095029, 910.190058, X, Y)
[Sat Jul 28 09:01:57 2012] Writing fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src12.gif
[Sat Jul 28 09:09:25 2012] Mean detx,y = (6080.92, 7032.11) 
[Sat Jul 28 09:09:26 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 09:09:37 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 09:09:37 2012] Setting source spectrum file to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jul 28 09:09:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Jul 28 11:14:37 2012] Updating aperture counts using extracted products
[Sat Jul 28 11:14:37 2012] Error reading totcts from fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jul 28 11:14:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:14:41 2012] Using photon index=1.80, rate=0.00264, arf fullrun_mos2_xmm0554610101_pi300-10000_pass1_cl_src12.arf
[Sat Jul 28 11:14:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:14:42 2012] Updating source flux to 8.9e-14