[Fri Jul 27 10:40:04 2012] Detection parameters:
  Position = (386.9, 483.2) = 5 24 38.86 1 54 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 680.3 +/- 32.7
  Background counts = 24.8
  Rate = 0.01 +/- 0.0005

[Fri Jul 27 10:40:08 2012] Off-axis axis estimate = 14.85'
[Fri Jul 27 14:52:16 2012] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 14:52:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 14:52:16 2012] Initial guess for spatial extent in simple fitting = 13.85"
[Fri Jul 27 14:52:16 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.031
[Fri Jul 27 14:52:16 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.85"
[Fri Jul 27 17:22:08 2012] fullrun_mos1_xmm0554610101_pi300-10000_cl_pass0_src10.ximg exists
[Fri Jul 27 17:22:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554610101_pi300-10000_cl_pass0_src10.csv
[Fri Jul 27 17:22:08 2012] fullrun_mos1_xmm0554610101_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Jul 27 17:22:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554610101_pi300-10000_cl_pass0_src10.csv
[Fri Jul 27 17:22:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554610101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554610101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:22:09 2012] fullrun_mos1_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Jul 27 17:22:09 2012] fullrun_mos1_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Jul 27 17:22:09 2012] Fit fullrun_mos1_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Jul 27 20:13:28 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 17.949442 pixels away
[Fri Jul 27 20:13:28 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 20:13:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 20:13:28 2012] Assessing source extent using major
[Fri Jul 27 20:13:28 2012] Source does appear to be extended
[Fri Jul 27 20:13:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 23:26:27 2012] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 23:26:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 23:26:27 2012] Initial guess for spatial extent in simple fitting = 13.85"
[Fri Jul 27 23:26:27 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.031
[Fri Jul 27 23:26:27 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.85"
[Sat Jul 28 01:19:12 2012] fullrun_mos1_xmm0554610101_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jul 28 01:19:12 2012] fullrun_mos1_xmm0554610101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jul 28 01:19:13 2012] Fit fullrun_mos1_xmm0554610101_pi300-10000_cl_pass1_src10 appears to have run properly
[Sat Jul 28 01:19:14 2012] fullrun_mos1_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jul 28 01:19:14 2012] fullrun_mos1_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jul 28 01:19:14 2012] Fit fullrun_mos1_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Jul 28 03:56:02 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 18.041369 pixels away
[Sat Jul 28 03:56:02 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 03:56:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 03:56:02 2012] Assessing source extent using major
[Sat Jul 28 03:56:02 2012] Source does appear to be extended
[Sat Jul 28 03:56:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 07:40:04 2012] XMMSAS src. selection expression = ellipse(33611.032166, 41991.061310, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 07:40:04 2012] Writing source region out to fullrun_mos1_xmm0554610101_pi300-10000_pass1_cl_src4_src.reg
[Sat Jul 28 07:40:04 2012] Extracting stamp from image fullrun_mos1_xmm0554610101_pi300-10000_cl_sm2.00.img.gz, (349, 446) - (424, 521)
[Sat Jul 28 07:40:05 2012] XMMSAS bgd. selection expression = annulus(33611.032166, 41991.061310, 1087.500000, 2175.000000, X, Y) && !ellipse(30983.397461, 40514.288879, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 07:40:05 2012] Writing fullrun_mos1_xmm0554610101_pi300-10000_pass1_cl_src4.gif
[Sat Jul 28 07:45:28 2012] Mean detx,y = (15481.71, 4312.20) 
[Sat Jul 28 07:45:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 07:45:50 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 07:45:50 2012] Setting source spectrum file to fullrun_mos1_xmm0554610101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jul 28 07:45:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554610101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jul 28 08:19:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 28 08:19:29 2012] rmf not generated due to insufficient counts
[Sat Jul 28 11:14:26 2012] Updating aperture counts using extracted products
[Sat Jul 28 11:14:26 2012] Error reading totcts from fullrun_mos1_xmm0554610101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jul 28 11:14:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:14:33 2012] Using photon index=1.80, rate=0.0107, arf fullrun_mos1_xmm0554610101_pi300-10000_pass1_cl_src4.arf
[Sat Jul 28 11:14:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:14:33 2012] Updating source flux to 3.2e-13
[Sat Jul 28 11:14:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting