[Sat Jul 28 07:15:37 2012] Detection parameters:
  Position = (247.7, 349.1) = 18 8 50.95 -20 19 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 236.6 +/- 21.2
  Background counts = 51.9
  Rate = 0.007 +/- 0.0007

[Sat Jul 28 07:15:37 2012] Off-axis axis estimate = 5.20'
[Sat Jul 28 07:53:27 2012] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 07:53:27 2012] Initial guess for spatial extent in simple fitting = 9.03"
[Sat Jul 28 07:53:27 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.942
[Sat Jul 28 07:53:27 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.03"
[Sat Jul 28 08:06:01 2012] fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jul 28 08:06:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_src2.csv
[Sat Jul 28 08:06:01 2012] fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jul 28 08:06:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_src2.csv
[Sat Jul 28 08:06:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 08:06:01 2012] fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jul 28 08:06:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jul 28 08:06:01 2012] fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jul 28 08:06:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jul 28 08:06:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 08:06:09 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.641584 pixels away
[Sat Jul 28 08:06:09 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 08:06:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 08:06:09 2012] Assessing source extent using major
[Sat Jul 28 08:06:09 2012] Source does appear to be extended
[Sat Jul 28 08:06:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 08:42:31 2012] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 08:42:31 2012] Initial guess for spatial extent in simple fitting = 9.03"
[Sat Jul 28 08:42:31 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.942
[Sat Jul 28 08:42:31 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.03"
[Sat Jul 28 08:52:21 2012] fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jul 28 08:52:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_src2.csv
[Sat Jul 28 08:52:21 2012] fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jul 28 08:52:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_src2.csv
[Sat Jul 28 08:52:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 08:52:21 2012] fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jul 28 08:52:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jul 28 08:52:21 2012] fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jul 28 08:52:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jul 28 08:52:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 08:52:28 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 71.977643 pixels away
[Sat Jul 28 08:52:28 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.641584 pixels away
[Sat Jul 28 08:52:28 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 08:52:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 08:52:28 2012] Assessing source extent using major
[Sat Jul 28 08:52:28 2012] Source does appear to be extended
[Sat Jul 28 08:52:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 09:31:27 2012] XMMSAS src. selection expression = ellipse(21497.167618, 30322.672180, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 09:31:27 2012] Writing source region out to fullrun_mos2_xmm0554600401_pi300-10000_pass1_cl_src3_src.reg
[Sat Jul 28 09:31:27 2012] Extracting stamp from image fullrun_mos2_xmm0554600401_pi300-10000_cl_sm2.00.img.gz, (210, 312) - (285, 387)
[Sat Jul 28 09:31:27 2012] XMMSAS bgd. selection expression = annulus(21497.167618, 30322.672180, 1087.500000, 2175.000000, X, Y)
[Sat Jul 28 09:31:27 2012] Writing fullrun_mos2_xmm0554600401_pi300-10000_pass1_cl_src3.gif
[Sat Jul 28 09:31:48 2012] Mean detx,y = (-3257.98, -5999.39) 
[Sat Jul 28 09:31:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 09:32:08 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 09:32:08 2012] Setting source spectrum file to fullrun_mos2_xmm0554600401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 28 09:32:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554600401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jul 28 09:37:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 28 09:37:09 2012] rmf not generated due to insufficient counts
[Sat Jul 28 09:38:47 2012] Updating aperture counts using extracted products
[Sat Jul 28 09:38:47 2012] Error reading totcts from fullrun_mos2_xmm0554600401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 28 09:38:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 09:38:47 2012] Using photon index=1.80, rate=0.00733, arf fullrun_mos2_xmm0554600401_pi300-10000_pass1_cl_src3.arf
[Sat Jul 28 09:38:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 09:38:47 2012] Updating source flux to 9.6e-14
[Sat Jul 28 09:39:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting