[Sat Jul 28 07:15:37 2012] Detection parameters:
  Position = (285.3, 279.0) = 18 8 39.31 -20 24 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8247.4 +/- 108.7
  Background counts = 63.4
  Rate = 0.2 +/- 0.003

[Sat Jul 28 07:15:37 2012] Off-axis axis estimate = 1.70'
[Sat Jul 28 07:53:27 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 07:53:27 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Jul 28 07:53:27 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sat Jul 28 07:53:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Jul 28 08:06:01 2012] fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 28 08:06:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_src1.csv
[Sat Jul 28 08:06:01 2012] fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 28 08:06:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_src1.csv
[Sat Jul 28 08:06:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 08:06:01 2012] fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 28 08:06:01 2012] fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 28 08:06:01 2012] Fit fullrun_mos2_xmm0554600401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 28 08:06:09 2012] Spatial fit model total counts = 7347.520000, observed total counts = 6775.000000
[Sat Jul 28 08:06:09 2012] Offset between fit and detection position for source 1 = 0.045691 pixels
[Sat Jul 28 08:06:09 2012] 7274.190000 total counts/ 2389.570000 bgd. counts: snr = 99.924252
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.045691 pixels
  Position = (285.4, 279.0) = 18 8 39.29 -20 24 40.4
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 4884.6 +/- 85.3
  Background counts = 2389.6
  Rate = 0.1 +/- 0.002
[Sat Jul 28 08:06:09 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 08:06:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 08:06:09 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 08:06:09 2012] Source does appear to be extended
[Sat Jul 28 08:06:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 08:42:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 08:42:31 2012] Initial guess for spatial extent in simple fitting = 5.29"
[Sat Jul 28 08:42:31 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.019
[Sat Jul 28 08:42:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.29"
[Sat Jul 28 08:52:21 2012] fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 28 08:52:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 08:52:21 2012] fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 28 08:52:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 08:52:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 08:52:21 2012] fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 28 08:52:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jul 28 08:52:21 2012] fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 28 08:52:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jul 28 08:52:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554600401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 08:52:28 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Sat Jul 28 08:52:28 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 08:52:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 08:52:28 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 08:52:28 2012] Source does appear to be extended
[Sat Jul 28 08:52:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 09:31:27 2012] Counts = 4884.620000, rescaling region sizes by 2.000000
[Sat Jul 28 09:31:27 2012] XMMSAS src. selection expression = ellipse(24778.639200, 24228.756200, 634.720818, 634.720818, 0.000000, X, Y)
[Sat Jul 28 09:31:27 2012] Writing source region out to fullrun_mos2_xmm0554600401_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 28 09:31:27 2012] Extracting stamp from image fullrun_mos2_xmm0554600401_pi300-10000_cl_sm2.00.img.gz, (249, 243) - (322, 316)
[Sat Jul 28 09:31:27 2012] XMMSAS bgd. selection expression = annulus(24778.639200, 24228.756200, 2115.736061, 4231.472122, X, Y)
[Sat Jul 28 09:31:27 2012] Writing fullrun_mos2_xmm0554600401_pi300-10000_pass1_cl_src1.gif
[Sat Jul 28 09:31:30 2012] Mean detx,y = (61.64, 64.29) 
[Sat Jul 28 09:31:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 09:31:45 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 09:31:45 2012] Setting source spectrum file to fullrun_mos2_xmm0554600401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 28 09:31:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554600401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 28 09:38:47 2012] Updating aperture counts using extracted products
[Sat Jul 28 09:38:47 2012] Error reading totcts from fullrun_mos2_xmm0554600401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 28 09:38:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 09:38:47 2012] Using photon index=1.80, rate=0.137, arf fullrun_mos2_xmm0554600401_pi300-10000_pass1_cl_src1.arf
[Sat Jul 28 09:38:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 09:38:47 2012] Updating source flux to 1.5e-12
[Sat Jul 28 09:39:29 2012] Reading fit data from xmm0554600401/analysis//spectral/fullrun_mos2_xmm0554600401_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul 28 09:39:29 2012] Spectral fit parameter nH value = 7.4429e+22
[Sat Jul 28 09:39:29 2012] Spectral fit parameter PhoIndex value = 2.0719
[Sat Jul 28 09:39:29 2012] Failed to get F(0.3-8.0) from xmm0554600401/analysis//spectral/fullrun_mos2_xmm0554600401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul 28 09:39:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 09:39:29 2012] Using Nh = 7.4e+22, photon index=2.07, rate=0.137, arf fullrun_mos2_xmm0554600401_pi300-10000_pass1_cl_src1.arf
[Sat Jul 28 09:39:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 09:39:30 2012] Updating source flux to 4.2e-12