[Thu Sep 6 11:10:55 2012] Detection parameters: Position = (185.6, 417.5) = 23 33 44.06 -54 29 25.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 28.4 +/- 7.2 Background counts = 5.2 Rate = 0.002 +/- 0.0006 [Thu Sep 6 11:10:56 2012] Off-axis axis estimate = 11.90' [Thu Sep 6 11:36:58 2012] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting [Thu Sep 6 11:36:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Sep 6 11:36:58 2012] Initial guess for spatial extent in simple fitting = 12.38" [Thu Sep 6 11:36:58 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.095 [Thu Sep 6 11:36:58 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.38" [Thu Sep 6 11:51:13 2012] fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_src11.ximg exists [Thu Sep 6 11:51:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_src11.csv [Thu Sep 6 11:51:13 2012] fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_src11_1.ximg exists [Thu Sep 6 11:51:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_src11.csv [Thu Sep 6 11:51:13 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_src11_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Sep 6 11:51:13 2012] fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists [Thu Sep 6 11:51:13 2012] fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists [Thu Sep 6 11:51:13 2012] Fit fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly [Thu Sep 6 12:04:31 2012] Spatial fit model total counts = 73.402900, observed total counts = 82.000000 [Thu Sep 6 12:04:31 2012] Offset between fit and detection position for source 5 = 0.894792 pixels [Thu Sep 6 12:04:31 2012] 72.515250 total counts/ 65.916000 bgd. counts: snr = 0.812829 Spatial fit parameters: Offset between fit and detection position for source 5 = 0.894792 pixels Position = (184.7, 417.3) = 23 33 44.50 -54 29 27.8 Extent = 3.3" x 3.3", rotation angle = 349 Source counts = 6.6 +/- 8.5 Background counts = 65.9 Rate = 0.0006 +/- 0.0007 Deleting source due to low Poisson probability