[Thu Sep  6 11:10:56 2012] Detection parameters:
  Position = (317.1, 489.4) = 23 32 38.41 -54 24 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.1 +/- 6.9
  Background counts = 3.7
  Rate = 0.002 +/- 0.0006

[Thu Sep  6 11:10:56 2012] Off-axis axis estimate = 13.91'
[Thu Sep  6 11:36:58 2012] Using EEF radius (= 13.38 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 11:36:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep  6 11:36:58 2012] Initial guess for spatial extent in simple fitting = 13.38"
[Thu Sep  6 11:36:58 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.958
[Thu Sep  6 11:36:58 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 13.38"
[Thu Sep  6 11:51:13 2012] fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_src12.ximg exists
[Thu Sep  6 11:51:13 2012] fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Sep  6 11:51:13 2012] Fit fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_src12 appears to have run properly
[Thu Sep  6 11:51:13 2012] fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Sep  6 11:51:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Sep  6 11:51:13 2012] fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Sep  6 11:51:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Sep  6 11:51:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554560601_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 12:04:31 2012] Spatial fit model total counts = 75.826600, observed total counts = 69.000000
[Thu Sep  6 12:04:31 2012] Offset between fit and detection position for source 14 = 0.505891 pixels
[Thu Sep  6 12:04:31 2012] 76.737200 total counts/ 49.629400 bgd. counts: snr = 3.847909
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.505891 pixels
  Position = (316.6, 489.5) = 23 32 38.65 -54 24 14.7
  Extent = 21.1 (10.6-26.8)", rotation angle = 351 (341-359) degrees
  Source counts = 27.1 +/- 8.8
  Background counts = 49.6
  Rate = 0.002 +/- 0.0007
[Thu Sep  6 12:04:31 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 12:04:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 12:04:31 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 12:04:31 2012] Source does appear to be extended
[Thu Sep  6 12:04:31 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.85
[Thu Sep  6 12:04:31 2012] Source is asymmetric
[Thu Sep  6 12:28:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep  6 12:28:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep  6 12:28:33 2012] Initial guess for spatial extent in simple fitting = 12.21"
[Thu Sep  6 12:28:33 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.120
[Thu Sep  6 12:28:33 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.21"
[Thu Sep  6 12:40:02 2012] fullrun_mos1_xmm0554560601_pi300-10000_cl_pass1_src11.ximg exists
[Thu Sep  6 12:40:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554560601_pi300-10000_cl_pass1_src11.csv
[Thu Sep  6 12:40:02 2012] fullrun_mos1_xmm0554560601_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Sep  6 12:40:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554560601_pi300-10000_cl_pass1_src11.csv
[Thu Sep  6 12:40:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554560601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554560601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 12:40:02 2012] fullrun_mos1_xmm0554560601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Sep  6 12:40:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554560601_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Sep  6 12:40:02 2012] fullrun_mos1_xmm0554560601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Sep  6 12:40:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554560601_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Sep  6 12:40:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554560601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554560601_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 12:55:27 2012] Spatial fit model total counts = 65.409700, observed total counts = 59.000000
[Thu Sep  6 12:55:27 2012] Offset between fit and detection position for source 14 = 1.115967 pixels
[Thu Sep  6 12:55:27 2012] 65.976500 total counts/ 51.036600 bgd. counts: snr = 2.091254
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 1.115967 pixels
  Position = (317.7, 489.3) = 23 32 38.10 -54 24 15.3
  Extent = 4.9 (3.1-8.6)", rotation angle = 0
  Source counts = 14.9 +/- 8.1
  Background counts = 51.0
  Rate = 0.001 +/- 0.0007
[Thu Sep  6 12:55:27 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 12:55:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 12:55:27 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 12:55:27 2012] Source does appear to be extended
[Thu Sep  6 12:55:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 13:02:57 2012] XMMSAS src. selection expression = ellipse(27591.219400, 42524.371600, 293.626808, 293.626808, 0.000000, X, Y)
[Thu Sep  6 13:02:57 2012] Writing source region out to fullrun_mos1_xmm0554560601_pi300-10000_pass1_cl_src14_src.reg
[Thu Sep  6 13:02:57 2012] Extracting stamp from image fullrun_mos1_xmm0554560601_pi300-10000_cl_sm2.00.img.gz, (301, 472) - (335, 506)
[Thu Sep  6 13:02:57 2012] XMMSAS bgd. selection expression = annulus(27591.219400, 42524.371600, 489.378014, 978.756028, X, Y)
[Thu Sep  6 13:02:57 2012] Writing fullrun_mos1_xmm0554560601_pi300-10000_pass1_cl_src14.gif
[Thu Sep  6 13:04:27 2012] Mean detx,y = (14576.70, -6178.50) 
[Thu Sep  6 13:04:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 13:04:34 2012] grppha failed
[Thu Sep  6 13:04:34 2012] Setting source spectrum file to fullrun_mos1_xmm0554560601_pi300-10000_pass1_cl_src14_src.pi.gz
[Thu Sep  6 13:04:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554560601_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Thu Sep  6 13:04:44 2012] Not generating rmf since there are only 14 counts
[Thu Sep  6 13:04:44 2012] rmf not generated due to insufficient counts
[Thu Sep  6 13:07:00 2012] Updating aperture counts using extracted products
[Thu Sep  6 13:07:00 2012] Error reading totcts from fullrun_mos1_xmm0554560601_pi300-10000_pass1_cl_src14_src.pi.gz
[Thu Sep  6 13:07:00 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 13:07:01 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep  6 13:07:02 2012] xmm0554560601/analysis//spectral/fullrun_mos1_xmm0554560601_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete