[Tue Jun 19 19:56:18 2012] Detection parameters:
  Position = (336.5, 360.7) = 8 29 53.68 38 5 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.0 +/- 15.3
  Background counts = 55.7
  Rate = 0.003 +/- 0.0005

[Tue Jun 19 19:56:18 2012] Off-axis axis estimate = 5.29'
[Tue Jun 19 19:59:37 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 19:59:37 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Tue Jun 19 19:59:37 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.935
[Tue Jun 19 19:59:37 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 9.07"
[Tue Jun 19 21:15:50 2012] fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_src35.ximg exists
[Tue Jun 19 21:15:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_src35.csv
[Tue Jun 19 21:15:50 2012] fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Jun 19 21:15:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_src35.csv
[Tue Jun 19 21:15:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 21:15:51 2012] fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Jun 19 21:15:51 2012] fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Jun 19 21:15:51 2012] Fit fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Tue Jun 19 22:13:35 2012] Source 36 is offset by 8.775195 and -2.333614 pixels which is larger than
2 X fitted extent = 1.043021 x 1.043021, not incorporating fit results
[Tue Jun 19 22:13:35 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 22:13:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 22:13:35 2012] Assessing source extent using major
[Tue Jun 19 22:13:35 2012] Source does appear to be extended
[Tue Jun 19 22:13:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 22:13:54 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 22:13:54 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Tue Jun 19 22:13:54 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.935
[Tue Jun 19 22:13:54 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 9.07"
[Tue Jun 19 23:25:12 2012] fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_src35.ximg exists
[Tue Jun 19 23:25:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_src35.csv
[Tue Jun 19 23:25:12 2012] fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_src35_1.ximg exists
[Tue Jun 19 23:25:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_src35.csv
[Tue Jun 19 23:25:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 23:25:12 2012] fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Tue Jun 19 23:25:12 2012] fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Tue Jun 19 23:25:12 2012] Fit fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Wed Jun 20 00:20:54 2012] Spatial fit model total counts = 599.999000, observed total counts = 600.000000
[Wed Jun 20 00:20:54 2012] Offset between fit and detection position for source 36 = 0.097096 pixels
[Wed Jun 20 00:20:54 2012] 599.968600 total counts/ 524.305000 bgd. counts: snr = 3.304418
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.097096 pixels
  Position = (336.4, 360.7) = 8 29 53.71 38 5 59.6
  Extent = 8.0 (5.4-11.5)", rotation angle = 0
  Source counts = 75.7 +/- 24.5
  Background counts = 524.3
  Rate = 0.002 +/- 0.0005
[Wed Jun 20 00:20:54 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 00:20:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 00:20:54 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 00:20:54 2012] Source does appear to be extended
[Wed Jun 20 00:20:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 00:21:15 2012] XMMSAS src. selection expression = ellipse(29219.744800, 31331.263600, 482.932214, 482.932214, 0.000000, X, Y)
[Wed Jun 20 00:21:15 2012] Writing source region out to fullrun_pn_xmm0554540201_pi300-10000_pass1_cl_src36_src.reg
[Wed Jun 20 00:21:15 2012] Extracting stamp from image fullrun_pn_xmm0554540201_pi300-10000_cl_sm2.00.img.gz, (309, 333) - (364, 388)
[Wed Jun 20 00:21:15 2012] XMMSAS bgd. selection expression = annulus(29219.744800, 31331.263600, 804.887023, 1609.774046, X, Y) && !ellipse(27945.600555, 32752.932007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26848.226501, 30444.814148, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 20 00:21:15 2012] Writing fullrun_pn_xmm0554540201_pi300-10000_pass1_cl_src36.gif
[Wed Jun 20 00:51:39 2012] Mean detx,y = (-5222.07, 6233.40) 
[Wed Jun 20 00:51:42 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 00:51:54 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 00:51:54 2012] Setting source spectrum file to fullrun_pn_xmm0554540201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Wed Jun 20 00:51:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554540201_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Wed Jun 20 01:28:31 2012] Not generating rmf since there are only 75 counts
[Wed Jun 20 01:28:31 2012] rmf not generated due to insufficient counts
[Wed Jun 20 02:20:26 2012] Updating aperture counts using extracted products
[Wed Jun 20 02:20:26 2012] Error reading totcts from fullrun_pn_xmm0554540201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Wed Jun 20 02:20:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 02:20:27 2012] Using photon index=1.80, rate=0.0016, arf fullrun_pn_xmm0554540201_pi300-10000_pass1_cl_src36.arf
[Wed Jun 20 02:20:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 02:20:27 2012] Updating source flux to 6.6e-15
[Wed Jun 20 02:21:38 2012] Flag b found in src. 36 procflags, skipping spectral fitting
[Wed Jun 20 02:21:38 2012] Source 36 has fewer than 100.000000 counts, skipping spectral fitting