[Tue Jun 19 19:56:17 2012] Detection parameters:
  Position = (289.0, 276.1) = 8 30 11.16 37 59 51.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7978.5 +/- 107.2
  Background counts = 55.5
  Rate = 0.2 +/- 0.003

[Tue Jun 19 19:56:18 2012] Off-axis axis estimate = 1.76'
[Tue Jun 19 19:59:37 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 19:59:37 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Jun 19 19:59:37 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Tue Jun 19 19:59:37 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.31"
[Tue Jun 19 21:15:49 2012] fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 19 21:15:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_src3.csv
[Tue Jun 19 21:15:49 2012] fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 19 21:15:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_src3.csv
[Tue Jun 19 21:15:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 21:15:50 2012] fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 19 21:15:50 2012] fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 19 21:15:50 2012] Fit fullrun_pn_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jun 19 22:13:35 2012] Spatial fit model total counts = 7529.910000, observed total counts = 7475.000000
[Tue Jun 19 22:13:35 2012] Offset between fit and detection position for source 3 = 0.080205 pixels
[Tue Jun 19 22:13:35 2012] 7537.880000 total counts/ 1845.840000 bgd. counts: snr = 132.486283
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.080205 pixels
  Position = (289.0, 276.2) = 8 30 11.17 37 59 52.0
  Extent = 6.0 (5.8-6.1)", rotation angle = 0
  Source counts = 5692.0 +/- 86.8
  Background counts = 1845.8
  Rate = 0.1 +/- 0.002
[Tue Jun 19 22:13:35 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 22:13:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 22:13:35 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 22:13:35 2012] Source does appear to be extended
[Tue Jun 19 22:13:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 22:13:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 22:13:54 2012] Initial guess for spatial extent in simple fitting = 5.98"
[Tue Jun 19 22:13:54 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.138
[Tue Jun 19 22:13:54 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.98"
[Tue Jun 19 23:25:11 2012] fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 19 23:25:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_src3.csv
[Tue Jun 19 23:25:11 2012] fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 19 23:25:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_src3.csv
[Tue Jun 19 23:25:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 23:25:12 2012] fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 19 23:25:12 2012] fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 19 23:25:12 2012] Fit fullrun_pn_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jun 20 00:20:53 2012] Warning, spatial fit 3 centroid is now closest to src. 42
[Wed Jun 20 00:20:54 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 00:20:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 00:20:54 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 00:20:54 2012] Source does appear to be extended
[Wed Jun 20 00:20:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 00:21:14 2012] Counts = 5692.040000, rescaling region sizes by 2.000000
[Wed Jun 20 00:21:14 2012] XMMSAS src. selection expression = ellipse(25097.084820, 23977.131600, 717.655221, 717.655221, 0.000000, X, Y)
[Wed Jun 20 00:21:14 2012] Writing source region out to fullrun_pn_xmm0554540201_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun 20 00:21:14 2012] Extracting stamp from image fullrun_pn_xmm0554540201_pi300-10000_cl_sm2.00.img.gz, (248, 235) - (330, 317)
[Wed Jun 20 00:21:14 2012] XMMSAS bgd. selection expression = annulus(25097.084820, 23977.131600, 2392.184069, 4784.368138, X, Y) && !ellipse(21723.052200, 28245.841888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19676.445435, 26996.430237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22561.519600, 24808.592200, 328.922409, 328.922409, 0.000000, X, Y) && !ellipse(29074.171204, 22226.218750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19886.167526, 21330.706573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27033.103600, 18984.252600, 574.941617, 509.529615, 45.053000, X, Y) && !ellipse(20382.907578, 28505.275421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24583.444160, 28391.789080, 466.509613, 466.509613, 0.000000, X, Y) && !ellipse(20636.518631, 27362.415405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24695.242400, 26886.111200, 561.765616, 561.765616, 0.000000, X, Y) && !ellipse(27635.498444, 25171.957825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29886.879740, 22139.307400, 365.081611, 365.081611, 0.000000, X, Y) && !ellipse(27043.421800, 20402.301800, 411.158412, 411.158412, 0.000000, X, Y) && !ellipse(27533.508148, 19848.636032, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 20 00:21:14 2012] Writing fullrun_pn_xmm0554540201_pi300-10000_pass1_cl_src3.gif
[Wed Jun 20 00:25:32 2012] Mean detx,y = (72.82, -296.57) 
[Wed Jun 20 00:25:38 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 00:26:42 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 00:26:43 2012] Setting source spectrum file to fullrun_pn_xmm0554540201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 20 00:26:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554540201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun 20 02:20:26 2012] Updating aperture counts using extracted products
[Wed Jun 20 02:20:26 2012] Error reading totcts from fullrun_pn_xmm0554540201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 20 02:20:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 02:20:26 2012] Using photon index=1.80, rate=0.12, arf fullrun_pn_xmm0554540201_pi300-10000_pass1_cl_src3.arf
[Wed Jun 20 02:20:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 02:20:26 2012] Updating source flux to 2.8e-13