[Tue Jun 19 19:57:00 2012] Detection parameters:
  Position = (289.1, 276.1) = 8 30 11.15 37 59 52.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3341.5 +/- 69.5
  Background counts = 43.4
  Rate = 0.07 +/- 0.001

[Tue Jun 19 19:57:01 2012] Off-axis axis estimate = 1.75'
[Tue Jun 19 21:47:02 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 21:47:02 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Jun 19 21:47:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Tue Jun 19 21:47:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Tue Jun 19 22:13:25 2012] fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 19 22:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 22:13:25 2012] fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 19 22:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 22:13:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 22:13:26 2012] fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 19 22:13:26 2012] fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 19 22:13:26 2012] Fit fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 19 22:13:42 2012] Spatial fit model total counts = 3046.380000, observed total counts = 2869.000000
[Tue Jun 19 22:13:42 2012] Offset between fit and detection position for source 3 = 0.108349 pixels
[Tue Jun 19 22:13:42 2012] 3017.078000 total counts/ 856.578000 bgd. counts: snr = 73.819451
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.108349 pixels
  Position = (289.1, 276.2) = 8 30 11.14 37 59 52.3
  Extent = 5.2 (5.0-5.4)", rotation angle = 0
  Source counts = 2160.5 +/- 54.9
  Background counts = 856.6
  Rate = 0.04 +/- 0.001
[Tue Jun 19 22:13:42 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 22:13:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 22:13:42 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 22:13:42 2012] Source does appear to be extended
[Tue Jun 19 22:13:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 23:51:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 23:51:48 2012] Initial guess for spatial extent in simple fitting = 5.18"
[Tue Jun 19 23:51:48 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.048
[Tue Jun 19 23:51:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.18"
[Wed Jun 20 00:20:41 2012] fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 20 00:20:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_src1.csv
[Wed Jun 20 00:20:41 2012] fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 20 00:20:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_src1.csv
[Wed Jun 20 00:20:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 00:20:42 2012] fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 20 00:20:42 2012] fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 20 00:20:42 2012] Fit fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 20 00:21:02 2012] Spatial fit model total counts = 3046.400000, observed total counts = 2869.000000
[Wed Jun 20 00:21:02 2012] Offset between fit and detection position for source 3 = 0.000002 pixels
[Wed Jun 20 00:21:02 2012] 3017.094000 total counts/ 856.644000 bgd. counts: snr = 73.814899
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000002 pixels
  Position = (289.1, 276.2) = 8 30 11.14 37 59 52.3
  Extent = 5.2 (5.0-5.4)", rotation angle = 0
  Source counts = 2160.4 +/- 54.9
  Background counts = 856.6
  Rate = 0.04 +/- 0.001
[Wed Jun 20 00:21:02 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 00:21:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 00:21:02 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 00:21:02 2012] Source does appear to be extended
[Wed Jun 20 00:21:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 02:00:45 2012] Counts = 2160.450000, rescaling region sizes by 2.000000
[Wed Jun 20 02:00:45 2012] XMMSAS src. selection expression = ellipse(25105.589120, 23983.037600, 622.132818, 622.132818, 0.000000, X, Y)
[Wed Jun 20 02:00:45 2012] Writing source region out to fullrun_mos2_xmm0554540201_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun 20 02:00:45 2012] Extracting stamp from image fullrun_mos2_xmm0554540201_pi300-10000_cl_sm2.00.img.gz, (253, 240) - (325, 312)
[Wed Jun 20 02:00:45 2012] XMMSAS bgd. selection expression = annulus(25105.589120, 23983.037600, 2073.776060, 4147.552119, X, Y) && !ellipse(29076.004400, 22231.750000, 314.267209, 314.267209, 0.000000, X, Y) && !ellipse(21702.951060, 28250.670600, 326.147209, 326.147209, 0.000000, X, Y) && !ellipse(24593.720800, 28390.831800, 484.264814, 484.264814, 0.000000, X, Y) && !ellipse(27047.809933, 20401.505752, 561.715038, 472.431105, 0.000000, X, Y) && !ellipse(22554.199060, 24830.940000, 356.166410, 224.793606, 355.564392, X, Y)
[Wed Jun 20 02:00:45 2012] Writing fullrun_mos2_xmm0554540201_pi300-10000_pass1_cl_src3.gif
[Wed Jun 20 02:00:49 2012] Mean detx,y = (77.73, 150.69) 
[Wed Jun 20 02:00:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 02:01:03 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 02:01:03 2012] Setting source spectrum file to fullrun_mos2_xmm0554540201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 20 02:01:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554540201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun 20 02:20:28 2012] Updating aperture counts using extracted products
[Wed Jun 20 02:20:28 2012] Error reading totcts from fullrun_mos2_xmm0554540201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 20 02:20:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 02:20:28 2012] Using photon index=1.80, rate=0.044, arf fullrun_mos2_xmm0554540201_pi300-10000_pass1_cl_src3.arf
[Wed Jun 20 02:20:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 02:20:28 2012] Updating source flux to 4.6e-13
[Wed Jun 20 02:21:38 2012] Reading fit data from xmm0554540201/analysis//spectral/fullrun_mos2_xmm0554540201_pi300-10000_pass1_cl_src3_pl.csv
[Wed Jun 20 02:21:38 2012] Spectral fit parameter nH value = 4.49302e+21
[Wed Jun 20 02:21:38 2012] Spectral fit parameter PhoIndex value = 1.3363
[Wed Jun 20 02:21:38 2012] Failed to get F(0.3-8.0) from xmm0554540201/analysis//spectral/fullrun_mos2_xmm0554540201_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Jun 20 02:21:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 02:21:38 2012] Using Nh = 4.5e+21, photon index=1.34, rate=0.044, arf fullrun_mos2_xmm0554540201_pi300-10000_pass1_cl_src3.arf
[Wed Jun 20 02:21:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 02:21:38 2012] Updating source flux to 7.8e-13