[Tue Jun 19 19:57:01 2012] Detection parameters:
  Position = (307.5, 88.0) = 8 30 4.38 37 46 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.6 +/- 12.7
  Background counts = 30.0
  Rate = 0.001 +/- 0.0002

[Tue Jun 19 19:57:01 2012] Off-axis axis estimate = 15.27'
[Tue Jun 19 21:47:02 2012] Using EEF radius (= 14.06 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 21:47:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 21:47:02 2012] Initial guess for spatial extent in simple fitting = 14.06"
[Tue Jun 19 21:47:02 2012] source mask rpix=3.2, npix_max = 55, mask sum = 39, frac = 0.700
[Tue Jun 19 21:47:02 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 14.06"
[Tue Jun 19 22:13:25 2012] fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_src21.ximg exists
[Tue Jun 19 22:13:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_src21.csv
[Tue Jun 19 22:13:26 2012] fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Jun 19 22:13:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_src21.csv
[Tue Jun 19 22:13:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 22:13:26 2012] fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Jun 19 22:13:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Tue Jun 19 22:13:26 2012] fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Jun 19 22:13:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Tue Jun 19 22:13:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 22:13:42 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 18.406681 pixels away
[Tue Jun 19 22:13:42 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 22:13:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 22:13:42 2012] Assessing source extent using major
[Tue Jun 19 22:13:42 2012] Source does appear to be extended
[Tue Jun 19 22:13:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 23:51:48 2012] Using EEF radius (= 14.06 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 23:51:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 23:51:48 2012] Initial guess for spatial extent in simple fitting = 14.06"
[Tue Jun 19 23:51:48 2012] source mask rpix=3.2, npix_max = 55, mask sum = 39, frac = 0.700
[Tue Jun 19 23:51:48 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 14.06"
[Wed Jun 20 00:20:42 2012] fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_src21.ximg exists
[Wed Jun 20 00:20:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_src21.csv
[Wed Jun 20 00:20:42 2012] fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_src21_1.ximg exists
[Wed Jun 20 00:20:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_src21.csv
[Wed Jun 20 00:20:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 00:20:42 2012] fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Wed Jun 20 00:20:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Wed Jun 20 00:20:42 2012] fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Wed Jun 20 00:20:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Wed Jun 20 00:20:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 00:21:02 2012] Spatial fit model total counts = 387.368000, observed total counts = 276.000000
[Wed Jun 20 00:21:02 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 20 00:21:02 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 00:21:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 00:21:02 2012] Assessing source extent using major
[Wed Jun 20 00:21:02 2012] Source does appear to be extended
[Wed Jun 20 00:21:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 02:00:46 2012] XMMSAS src. selection expression = ellipse(26703.997345, 7611.284744, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 20 02:00:46 2012] Writing source region out to fullrun_mos2_xmm0554540201_pi300-10000_pass1_cl_src22_src.reg
[Wed Jun 20 02:00:46 2012] Extracting stamp from image fullrun_mos2_xmm0554540201_pi300-10000_cl_sm2.00.img.gz, (270, 51) - (345, 126)
[Wed Jun 20 02:00:46 2012] XMMSAS bgd. selection expression = annulus(26703.997345, 7611.284744, 1087.500000, 2175.000000, X, Y)
[Wed Jun 20 02:00:46 2012] Writing fullrun_mos2_xmm0554540201_pi300-10000_pass1_cl_src22.gif
[Wed Jun 20 02:05:53 2012] Mean detx,y = (-1043.50, 16431.32) 
[Wed Jun 20 02:05:54 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 02:06:19 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 02:06:19 2012] Setting source spectrum file to fullrun_mos2_xmm0554540201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Jun 20 02:06:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554540201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Jun 20 02:19:07 2012] Not generating rmf since there are only 63 counts
[Wed Jun 20 02:19:07 2012] rmf not generated due to insufficient counts
[Wed Jun 20 02:20:28 2012] Updating aperture counts using extracted products
[Wed Jun 20 02:20:28 2012] Error reading totcts from fullrun_mos2_xmm0554540201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Jun 20 02:20:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 02:20:28 2012] Using photon index=1.80, rate=0.00123, arf fullrun_mos2_xmm0554540201_pi300-10000_pass1_cl_src22.arf
[Wed Jun 20 02:20:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 02:20:28 2012] Updating source flux to 5.2e-14
[Wed Jun 20 02:21:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting