[Tue Jun 19 19:56:39 2012] Detection parameters:
  Position = (183.4, 412.0) = 8 30 50.12 38 9 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.3 +/- 10.6
  Background counts = 24.8
  Rate = 0.001 +/- 0.0002

[Tue Jun 19 19:56:39 2012] Off-axis axis estimate = 11.72'
[Tue Jun 19 21:15:51 2012] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 21:15:51 2012] Initial guess for spatial extent in simple fitting = 12.29"
[Tue Jun 19 21:15:51 2012] source mask rpix=2.8, npix_max = 44, mask sum = 39, frac = 0.882
[Tue Jun 19 21:15:51 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 12.29"
[Tue Jun 19 21:47:01 2012] fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_src19.ximg exists
[Tue Jun 19 21:47:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_src19.csv
[Tue Jun 19 21:47:01 2012] fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Jun 19 21:47:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_src19.csv
[Tue Jun 19 21:47:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 21:47:02 2012] fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Jun 19 21:47:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue Jun 19 21:47:02 2012] fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Jun 19 21:47:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue Jun 19 21:47:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 22:13:39 2012] Warning, spatial fit 19 centroid is now closest to src. 9
[Tue Jun 19 22:13:39 2012] Spatial fit model total counts = 260.684000, observed total counts = 256.000000
[Tue Jun 19 22:13:39 2012] Offset between fit and detection position for source 8 = 2.745061 pixels
[Tue Jun 19 22:13:39 2012] Warning, changing simple spatial fit ID from 19 to 23
[Tue Jun 19 22:13:39 2012] 265.394100 total counts/ 251.451000 bgd. counts: snr = 0.879291
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 2.745061 pixels
  Position = (185.8, 413.5) = 8 30 49.27 38 9 49.0
  Extent = 8.1 (5.8-15.3)", rotation angle = 0
  Source counts = 13.9 +/- 16.3
  Background counts = 251.5
  Rate = 0.0003 +/- 0.0003
  Deleting source due to low Poisson probability