[Tue Jun 19 19:56:39 2012] Detection parameters:
  Position = (289.0, 276.2) = 8 30 11.17 37 59 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3248.2 +/- 69.5
  Background counts = 34.6
  Rate = 0.06 +/- 0.001

[Tue Jun 19 19:56:39 2012] Off-axis axis estimate = 1.75'
[Tue Jun 19 21:15:51 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 21:15:51 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Jun 19 21:15:51 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Tue Jun 19 21:15:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Tue Jun 19 21:47:01 2012] fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 19 21:47:01 2012] fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 19 21:47:01 2012] Fit fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Jun 19 21:47:02 2012] fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 19 21:47:02 2012] fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 19 21:47:02 2012] Fit fullrun_mos1_xmm0554540201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 19 22:13:39 2012] Spatial fit model total counts = 2919.010000, observed total counts = 2919.000000
[Tue Jun 19 22:13:39 2012] Offset between fit and detection position for source 2 = 0.131076 pixels
[Tue Jun 19 22:13:39 2012] 2916.401000 total counts/ 750.811000 bgd. counts: snr = 79.033447
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.131076 pixels
  Position = (289.0, 276.3) = 8 30 11.17 37 59 52.6
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 2165.6 +/- 54.0
  Background counts = 750.8
  Rate = 0.04 +/- 0.001
[Tue Jun 19 22:13:39 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 22:13:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 22:13:39 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 22:13:39 2012] Source does appear to be extended
[Tue Jun 19 22:13:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 23:25:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 23:25:12 2012] Initial guess for spatial extent in simple fitting = 5.54"
[Tue Jun 19 23:25:12 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.953
[Tue Jun 19 23:25:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.54"
[Tue Jun 19 23:51:48 2012] fullrun_mos1_xmm0554540201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 19 23:51:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554540201_pi300-10000_cl_pass1_src1.csv
[Tue Jun 19 23:51:48 2012] fullrun_mos1_xmm0554540201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 19 23:51:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554540201_pi300-10000_cl_pass1_src1.csv
[Tue Jun 19 23:51:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554540201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554540201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 23:51:48 2012] fullrun_mos1_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 19 23:51:48 2012] fullrun_mos1_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 19 23:51:48 2012] Fit fullrun_mos1_xmm0554540201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 20 00:20:58 2012] Spatial fit model total counts = 2919.000000, observed total counts = 2919.000000
[Wed Jun 20 00:20:58 2012] Offset between fit and detection position for source 2 = 0.000001 pixels
[Wed Jun 20 00:20:58 2012] 2916.387000 total counts/ 750.797000 bgd. counts: snr = 79.034184
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000001 pixels
  Position = (289.0, 276.3) = 8 30 11.17 37 59 52.6
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 2165.6 +/- 54.0
  Background counts = 750.8
  Rate = 0.04 +/- 0.001
[Wed Jun 20 00:20:58 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 00:20:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 00:20:58 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 00:20:58 2012] Source does appear to be extended
[Wed Jun 20 00:20:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 01:37:58 2012] Counts = 2165.590000, rescaling region sizes by 2.000000
[Wed Jun 20 01:37:58 2012] XMMSAS src. selection expression = ellipse(25096.409354, 23989.044600, 665.112019, 665.112019, 0.000000, X, Y)
[Wed Jun 20 01:37:58 2012] Writing source region out to fullrun_mos1_xmm0554540201_pi300-10000_pass1_cl_src2_src.reg
[Wed Jun 20 01:37:58 2012] Extracting stamp from image fullrun_mos1_xmm0554540201_pi300-10000_cl_sm2.00.img.gz, (251, 238) - (327, 315)
[Wed Jun 20 01:37:58 2012] XMMSAS bgd. selection expression = annulus(25096.409354, 23989.044600, 2217.040064, 4434.080128, X, Y) && !ellipse(29062.663000, 22252.289800, 412.822412, 412.822412, 0.000000, X, Y) && !ellipse(21689.384600, 28264.986000, 427.942412, 235.184007, 306.158800, X, Y) && !ellipse(27563.887853, 19819.167201, 420.561545, 251.080852, 351.292936, X, Y) && !ellipse(24577.122406, 28348.121582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22598.472600, 24781.995400, 586.987217, 288.519208, 3.339668, X, Y)
[Wed Jun 20 01:37:58 2012] Writing fullrun_mos1_xmm0554540201_pi300-10000_pass1_cl_src2.gif
[Wed Jun 20 01:38:01 2012] Mean detx,y = (361.17, -239.35) 
[Wed Jun 20 01:38:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 01:38:16 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 01:38:16 2012] Setting source spectrum file to fullrun_mos1_xmm0554540201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 20 01:38:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554540201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jun 20 02:20:27 2012] Updating aperture counts using extracted products
[Wed Jun 20 02:20:27 2012] Error reading totcts from fullrun_mos1_xmm0554540201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 20 02:20:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 02:20:28 2012] Using photon index=1.80, rate=0.0442, arf fullrun_mos1_xmm0554540201_pi300-10000_pass1_cl_src2.arf
[Wed Jun 20 02:20:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 02:20:28 2012] Updating source flux to 4.2e-13
[Wed Jun 20 02:21:08 2012] Reading fit data from xmm0554540201/analysis//spectral/fullrun_mos1_xmm0554540201_pi300-10000_pass1_cl_src2_pl.csv
[Wed Jun 20 02:21:08 2012] Spectral fit parameter nH value = 3.56201e+21
[Wed Jun 20 02:21:08 2012] Spectral fit parameter PhoIndex value = 1.25981
[Wed Jun 20 02:21:08 2012] Failed to get F(0.3-8.0) from xmm0554540201/analysis//spectral/fullrun_mos1_xmm0554540201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Jun 20 02:21:08 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 02:21:08 2012] Using Nh = 3.6e+21, photon index=1.26, rate=0.0442, arf fullrun_mos1_xmm0554540201_pi300-10000_pass1_cl_src2.arf
[Wed Jun 20 02:21:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 02:21:08 2012] Updating source flux to 7.1e-13