[Fri Dec 16 22:38:49 2011] Detection parameters:
  Position = (219.2, 253.5) = 13 41 40.62 30 17 48.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.3 +/- 10.3
  Background counts = 20.9
  Rate = 0.004 +/- 0.0009

[Fri Dec 16 22:38:49 2011] Off-axis axis estimate = 6.60'
[Fri Dec 16 22:58:05 2011] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 22:58:05 2011] Initial guess for spatial extent in simple fitting = 9.73"
[Fri Dec 16 22:58:05 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.001
[Fri Dec 16 22:58:05 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 9.73"
[Fri Dec 16 23:11:05 2011] fullrun_mos1_xmm0554501101_pi300-10000_cl_pass0_src9.ximg exists
[Fri Dec 16 23:11:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554501101_pi300-10000_cl_pass0_src9.csv
[Fri Dec 16 23:11:05 2011] fullrun_mos1_xmm0554501101_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Dec 16 23:11:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554501101_pi300-10000_cl_pass0_src9.csv
[Fri Dec 16 23:11:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554501101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554501101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 23:11:05 2011] fullrun_mos1_xmm0554501101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Dec 16 23:11:05 2011] fullrun_mos1_xmm0554501101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Dec 16 23:11:05 2011] Fit fullrun_mos1_xmm0554501101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Dec 16 23:12:28 2011] Spatial fit model total counts = 117.996000, observed total counts = 118.000000
[Fri Dec 16 23:12:28 2011] Offset between fit and detection position for source 10 = 0.265884 pixels
[Fri Dec 16 23:12:28 2011] 119.287500 total counts/ 97.105300 bgd. counts: snr = 2.251040
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.265884 pixels
  Position = (219.5, 253.5) = 13 41 40.53 30 17 48.5
  Extent = 4.5 (2.9-7.4)", rotation angle = 0
  Source counts = 22.2 +/- 10.9
  Background counts = 97.1
  Rate = 0.001 +/- 0.0006
[Fri Dec 16 23:12:28 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 23:12:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 23:12:28 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 23:12:28 2011] Source does appear to be extended
[Fri Dec 16 23:12:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 23:31:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 23:31:20 2011] Initial guess for spatial extent in simple fitting = 4.51"
[Fri Dec 16 23:31:20 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.953
[Fri Dec 16 23:31:20 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 4.51"
[Fri Dec 16 23:43:03 2011] fullrun_mos1_xmm0554501101_pi300-10000_cl_pass1_src9.ximg exists
[Fri Dec 16 23:43:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554501101_pi300-10000_cl_pass1_src9.csv
[Fri Dec 16 23:43:03 2011] fullrun_mos1_xmm0554501101_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Dec 16 23:43:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554501101_pi300-10000_cl_pass1_src9.csv
[Fri Dec 16 23:43:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554501101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554501101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 23:43:03 2011] fullrun_mos1_xmm0554501101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Dec 16 23:43:03 2011] fullrun_mos1_xmm0554501101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Dec 16 23:43:03 2011] Fit fullrun_mos1_xmm0554501101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Dec 16 23:44:15 2011] Spatial fit model total counts = 117.991000, observed total counts = 118.000000
[Fri Dec 16 23:44:15 2011] Offset between fit and detection position for source 10 = 0.018237 pixels
[Fri Dec 16 23:44:15 2011] 119.308300 total counts/ 97.451800 bgd. counts: snr = 2.214041
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.018237 pixels
  Position = (219.5, 253.5) = 13 41 40.53 30 17 48.4
  Extent = 4.4 (2.9-7.4)", rotation angle = 0
  Source counts = 21.9 +/- 10.9
  Background counts = 97.5
  Rate = 0.001 +/- 0.0006
[Fri Dec 16 23:44:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 23:44:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 23:44:15 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 23:44:15 2011] Source does appear to be extended
[Fri Dec 16 23:44:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 00:05:24 2011] XMMSAS src. selection expression = ellipse(19045.189200, 22007.510000, 264.362408, 264.362408, 0.000000, X, Y)
[Sat Dec 17 00:05:24 2011] Writing source region out to fullrun_mos1_xmm0554501101_pi300-10000_pass1_cl_src10_src.reg
[Sat Dec 17 00:05:24 2011] Extracting stamp from image fullrun_mos1_xmm0554501101_pi300-10000_cl_sm2.00.img.gz, (204, 238) - (235, 269)
[Sat Dec 17 00:05:24 2011] XMMSAS bgd. selection expression = annulus(19045.189200, 22007.510000, 440.604013, 881.208025, X, Y)
[Sat Dec 17 00:05:24 2011] Writing fullrun_mos1_xmm0554501101_pi300-10000_pass1_cl_src10.gif
[Sat Dec 17 00:07:04 2011] Mean detx,y = (-3428.82, -9001.94) 
[Sat Dec 17 00:07:04 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 00:07:11 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 00:07:12 2011] Setting source spectrum file to fullrun_mos1_xmm0554501101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Dec 17 00:07:12 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0554501101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Dec 17 00:11:54 2011] Not generating rmf since there are only 21 counts
[Sat Dec 17 00:11:54 2011] rmf not generated due to insufficient counts
[Sat Dec 17 00:13:02 2011] Updating aperture counts using extracted products
[Sat Dec 17 00:13:02 2011] Error reading totcts from fullrun_mos1_xmm0554501101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Dec 17 00:13:02 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 00:13:02 2011] Using photon index=1.80, rate=0.00121, arf fullrun_mos1_xmm0554501101_pi300-10000_pass1_cl_src10.arf
[Sat Dec 17 00:13:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 00:13:02 2011] Updating source flux to 2.7e-14
[Sat Dec 17 00:13:03 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting