[Fri Dec 23 23:03:24 2011] Detection parameters:
  Position = (199.2, 482.2) = 13 41 47.13 30 34 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.3 +/- 27.7
  Background counts = 282.0
  Rate = 0.006 +/- 0.001

[Fri Dec 23 23:03:24 2011] Off-axis axis estimate = 15.14'
[Fri Dec 23 23:11:38 2011] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 23:11:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 23:11:38 2011] Initial guess for spatial extent in simple fitting = 14.00"
[Fri Dec 23 23:11:38 2011] source mask rpix=3.2, npix_max = 55, mask sum = 48, frac = 0.868
[Fri Dec 23 23:11:38 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 14.00"
[Sat Dec 24 00:04:16 2011] fullrun_pn_xmm0554500701_pi300-10000_cl_pass0_src6.ximg exists
[Sat Dec 24 00:04:16 2011] fullrun_pn_xmm0554500701_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Dec 24 00:04:16 2011] Fit fullrun_pn_xmm0554500701_pi300-10000_cl_pass0_src6 appears to have run properly
[Sat Dec 24 00:04:16 2011] fullrun_pn_xmm0554500701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Dec 24 00:04:16 2011] fullrun_pn_xmm0554500701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Dec 24 00:04:16 2011] Fit fullrun_pn_xmm0554500701_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Dec 24 00:44:57 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 16.796659 pixels away
[Sat Dec 24 00:44:57 2011] Warning, spatial fit 6 centroid is now closest to src. 6
[Sat Dec 24 00:44:57 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 00:44:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 00:44:57 2011] Assessing source extent using major
[Sat Dec 24 00:44:57 2011] Source does appear to be extended
[Sat Dec 24 00:44:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 00:45:15 2011] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 00:45:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 24 00:45:15 2011] Initial guess for spatial extent in simple fitting = 14.00"
[Sat Dec 24 00:45:15 2011] source mask rpix=3.2, npix_max = 55, mask sum = 48, frac = 0.868
[Sat Dec 24 00:45:15 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 14.00"
[Sat Dec 24 01:54:05 2011] fullrun_pn_xmm0554500701_pi300-10000_cl_pass1_src6.ximg exists
[Sat Dec 24 01:54:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554500701_pi300-10000_cl_pass1_src6.csv
[Sat Dec 24 01:54:05 2011] fullrun_pn_xmm0554500701_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Dec 24 01:54:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554500701_pi300-10000_cl_pass1_src6.csv
[Sat Dec 24 01:54:05 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554500701_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554500701_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 01:54:06 2011] fullrun_pn_xmm0554500701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Dec 24 01:54:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554500701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Dec 24 01:54:06 2011] fullrun_pn_xmm0554500701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Dec 24 01:54:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554500701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Dec 24 01:54:06 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554500701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554500701_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 02:41:24 2011] Spatial fit model total counts = 891.072000, observed total counts = 1141.000000
[Sat Dec 24 02:41:24 2011] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Dec 24 02:41:24 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 02:41:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 02:41:24 2011] Assessing source extent using major
[Sat Dec 24 02:41:24 2011] Source does appear to be extended
[Sat Dec 24 02:41:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 02:41:24 2011] Source is confused with source 8
[Sat Dec 24 02:41:44 2011] XMMSAS src. selection expression = ellipse(17284.637070, 41905.080841, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 24 02:41:44 2011] Writing source region out to fullrun_pn_xmm0554500701_pi300-10000_pass1_cl_src7_src.reg
[Sat Dec 24 02:41:44 2011] Extracting stamp from image fullrun_pn_xmm0554500701_pi300-10000_cl_sm2.00.img.gz, (162, 445) - (237, 520)
[Sat Dec 24 02:41:44 2011] XMMSAS bgd. selection expression = annulus(17284.637070, 41905.080841, 1087.500000, 2175.000000, X, Y) && !ellipse(17924.138046, 42058.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18880.965740, 42212.894000, 2188.744063, 2188.744063, 0.000000, X, Y) && !ellipse(20271.003184, 42839.290423, 2201.744063, 1249.093512, -0.000000, X, Y)
[Sat Dec 24 02:41:44 2011] Writing fullrun_pn_xmm0554500701_pi300-10000_pass1_cl_src7.gif
[Sat Dec 24 02:49:06 2011] Mean detx,y = (-4857.62, -16172.04) 
[Sat Dec 24 02:49:11 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 02:49:45 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 02:49:45 2011] Setting source spectrum file to fullrun_pn_xmm0554500701_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Dec 24 02:49:45 2011] Setting bgd. spectrum file to fullrun_pn_xmm0554500701_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Dec 24 03:17:30 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 24 03:17:30 2011] rmf not generated due to insufficient counts
[Sat Dec 24 04:24:18 2011] Updating aperture counts using extracted products
[Sat Dec 24 04:24:18 2011] Error reading totcts from fullrun_pn_xmm0554500701_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Dec 24 04:24:18 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 04:24:18 2011] Using photon index=1.80, rate=0.00632, arf fullrun_pn_xmm0554500701_pi300-10000_pass1_cl_src7.arf
[Sat Dec 24 04:24:18 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 04:24:19 2011] Updating source flux to 5.4e-14
[Sat Dec 24 04:26:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting