[Fri Dec 23 23:03:58 2011] Detection parameters:
  Position = (381.6, 420.9) = 13 40 45.71 30 29 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.0 +/- 17.7
  Background counts = 55.5
  Rate = 0.009 +/- 0.001

[Fri Dec 23 23:03:59 2011] Off-axis axis estimate = 10.74'
[Sat Dec 24 00:04:16 2011] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 00:04:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 24 00:04:16 2011] Initial guess for spatial extent in simple fitting = 11.80"
[Sat Dec 24 00:04:16 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.018
[Sat Dec 24 00:04:16 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 11.80"
[Sat Dec 24 00:19:33 2011] fullrun_mos1_xmm0554500701_pi300-10000_cl_pass0_src4.ximg exists
[Sat Dec 24 00:19:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500701_pi300-10000_cl_pass0_src4.csv
[Sat Dec 24 00:19:33 2011] fullrun_mos1_xmm0554500701_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Dec 24 00:19:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500701_pi300-10000_cl_pass0_src4.csv
[Sat Dec 24 00:19:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554500701_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554500701_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 00:19:33 2011] fullrun_mos1_xmm0554500701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Dec 24 00:19:33 2011] fullrun_mos1_xmm0554500701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Dec 24 00:19:33 2011] Fit fullrun_mos1_xmm0554500701_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sat Dec 24 00:45:00 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.039301 pixels away
[Sat Dec 24 00:45:00 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 00:45:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 00:45:00 2011] Assessing source extent using major
[Sat Dec 24 00:45:00 2011] Source does appear to be extended
[Sat Dec 24 00:45:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 01:54:06 2011] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 01:54:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 24 01:54:06 2011] Initial guess for spatial extent in simple fitting = 11.80"
[Sat Dec 24 01:54:06 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.018
[Sat Dec 24 01:54:06 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 11.80"
[Sat Dec 24 02:09:54 2011] fullrun_mos1_xmm0554500701_pi300-10000_cl_pass1_src4.ximg exists
[Sat Dec 24 02:09:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500701_pi300-10000_cl_pass1_src4.csv
[Sat Dec 24 02:09:54 2011] fullrun_mos1_xmm0554500701_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Dec 24 02:09:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500701_pi300-10000_cl_pass1_src4.csv
[Sat Dec 24 02:09:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554500701_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554500701_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 02:09:54 2011] fullrun_mos1_xmm0554500701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Dec 24 02:09:54 2011] fullrun_mos1_xmm0554500701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Dec 24 02:09:54 2011] Fit fullrun_mos1_xmm0554500701_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Dec 24 02:41:27 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.039301 pixels away
[Sat Dec 24 02:41:27 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 02:41:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 02:41:27 2011] Assessing source extent using major
[Sat Dec 24 02:41:27 2011] Source does appear to be extended
[Sat Dec 24 02:41:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 03:37:22 2011] XMMSAS src. selection expression = ellipse(33154.486603, 36571.434967, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 24 03:37:22 2011] Writing source region out to fullrun_mos1_xmm0554500701_pi300-10000_pass1_cl_src2_src.reg
[Sat Dec 24 03:37:22 2011] Extracting stamp from image fullrun_mos1_xmm0554500701_pi300-10000_cl_sm2.00.img.gz, (344, 383) - (419, 458)
[Sat Dec 24 03:37:22 2011] XMMSAS bgd. selection expression = annulus(33154.486603, 36571.434967, 1087.500000, 2175.000000, X, Y)
[Sat Dec 24 03:37:22 2011] Writing fullrun_mos1_xmm0554500701_pi300-10000_pass1_cl_src2.gif
[Sat Dec 24 03:39:10 2011] Mean detx,y = (6805.17, 8521.28) 
[Sat Dec 24 03:39:12 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 03:39:32 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 03:39:32 2011] Setting source spectrum file to fullrun_mos1_xmm0554500701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Dec 24 03:39:32 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0554500701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Dec 24 03:56:52 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 24 03:56:52 2011] rmf not generated due to insufficient counts
[Sat Dec 24 04:24:19 2011] Updating aperture counts using extracted products
[Sat Dec 24 04:24:19 2011] Error reading totcts from fullrun_mos1_xmm0554500701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Dec 24 04:24:20 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 04:24:20 2011] Using photon index=1.80, rate=0.00853, arf fullrun_mos1_xmm0554500701_pi300-10000_pass1_cl_src2.arf
[Sat Dec 24 04:24:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 04:24:20 2011] Updating source flux to 1.3e-13
[Sat Dec 24 04:24:23 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting