[Tue Jun 26 10:47:45 2012] Detection parameters:
  Position = (274.3, 296.8) = 8 0 3.96 23 26 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2515.4 +/- 60.0
  Background counts = 96.6
  Rate = 0.09 +/- 0.002

[Tue Jun 26 10:47:46 2012] Off-axis axis estimate = 1.75'
[Tue Jun 26 11:50:58 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 11:50:58 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Jun 26 11:50:58 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Tue Jun 26 11:50:58 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.31"
[Tue Jun 26 12:29:56 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jun 26 12:29:56 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jun 26 12:29:56 2012] Fit fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_src2 appears to have run properly
[Tue Jun 26 12:29:56 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun 26 12:29:56 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun 26 12:29:56 2012] Fit fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jun 26 12:30:11 2012] Spatial fit model total counts = 1286.630000, observed total counts = 1285.000000
[Tue Jun 26 12:30:11 2012] Offset between fit and detection position for source 3 = 0.183270 pixels
[Tue Jun 26 12:30:11 2012] 1284.256000 total counts/ 373.187000 bgd. counts: snr = 47.161544
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.183270 pixels
  Position = (274.1, 296.7) = 8 0 4.01 23 26 16.6
  Extent = 4.6 (4.4-4.9)", rotation angle = 0
  Source counts = 911.1 +/- 35.8
  Background counts = 373.2
  Rate = 0.05 +/- 0.002
[Tue Jun 26 12:30:11 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 12:30:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 12:30:11 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 12:30:11 2012] Source does appear to be extended
[Tue Jun 26 12:30:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 13:20:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 26 13:20:21 2012] Initial guess for spatial extent in simple fitting = 4.65"
[Tue Jun 26 13:20:21 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.914
[Tue Jun 26 13:20:21 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.65"
[Tue Jun 26 13:51:18 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jun 26 13:51:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src2.csv
[Tue Jun 26 13:51:18 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jun 26 13:51:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src2.csv
[Tue Jun 26 13:51:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 13:51:18 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jun 26 13:51:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jun 26 13:51:18 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jun 26 13:51:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jun 26 13:51:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 13:51:26 2012] Warning, spatial fit 2 centroid is now closest to src. 13
[Tue Jun 26 13:51:26 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 13:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 13:51:26 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 13:51:26 2012] Source does appear to be extended
[Tue Jun 26 13:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 14:34:54 2012] XMMSAS src. selection expression = ellipse(23802.286700, 25767.459400, 278.894408, 278.894408, 0.000000, X, Y)
[Tue Jun 26 14:34:54 2012] Writing source region out to fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 26 14:34:54 2012] Extracting stamp from image fullrun_mos2_xmm0554500401_pi300-10000_cl_sm2.00.img.gz, (258, 281) - (290, 313)
[Tue Jun 26 14:34:54 2012] XMMSAS bgd. selection expression = annulus(23802.286700, 25767.459400, 464.824013, 929.648027, X, Y) && !ellipse(23686.317596, 24448.998657, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 26 14:34:54 2012] Writing fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src3.gif
[Tue Jun 26 14:35:21 2012] Mean detx,y = (-902.32, -1901.18) 
[Tue Jun 26 14:35:23 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 14:35:36 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 14:35:36 2012] Setting source spectrum file to fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 26 14:35:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 26 14:52:58 2012] Updating aperture counts using extracted products
[Tue Jun 26 14:52:58 2012] Error reading totcts from fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 26 14:52:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 14:52:59 2012] Using photon index=1.80, rate=0.052, arf fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src3.arf
[Tue Jun 26 14:52:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 14:52:59 2012] Updating source flux to 6.2e-13