[Tue Jun 26 10:47:45 2012] Detection parameters:
  Position = (272.8, 281.6) = 8 0 4.43 23 25 11.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.9 +/- 18.6
  Background counts = 95.9
  Rate = 0.004 +/- 0.0006

[Tue Jun 26 10:47:46 2012] Off-axis axis estimate = 2.22'
[Tue Jun 26 11:50:58 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 11:50:58 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Tue Jun 26 11:50:58 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.002
[Tue Jun 26 11:50:58 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.54"
[Tue Jun 26 12:29:56 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_src11.ximg exists
[Tue Jun 26 12:29:56 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Jun 26 12:29:56 2012] Fit fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_src11 appears to have run properly
[Tue Jun 26 12:29:56 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Jun 26 12:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Jun 26 12:29:56 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Jun 26 12:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Jun 26 12:29:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 12:30:11 2012] Source 13 is offset by 4.814777 and 6.340398 pixels which is larger than
2 X fitted extent = 1.530414 x 2.177692, not incorporating fit results
[Tue Jun 26 12:30:11 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 12:30:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 12:30:11 2012] Assessing source extent using major
[Tue Jun 26 12:30:11 2012] Source does appear to be extended
[Tue Jun 26 12:30:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 13:20:21 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 13:20:21 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Tue Jun 26 13:20:21 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.002
[Tue Jun 26 13:20:21 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.54"
[Tue Jun 26 13:51:18 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src9.ximg exists
[Tue Jun 26 13:51:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src9.csv
[Tue Jun 26 13:51:18 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Jun 26 13:51:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src9.csv
[Tue Jun 26 13:51:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 13:51:18 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Jun 26 13:51:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Jun 26 13:51:18 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Jun 26 13:51:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Jun 26 13:51:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 13:51:26 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 19.934477 pixels away
[Tue Jun 26 13:51:26 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 10.235230 pixels away
[Tue Jun 26 13:51:26 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 13:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 13:51:26 2012] Assessing source extent using major
[Tue Jun 26 13:51:26 2012] Source does appear to be extended
[Tue Jun 26 13:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 14:34:54 2012] XMMSAS src. selection expression = ellipse(23686.317596, 24448.998657, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 26 14:34:54 2012] Writing source region out to fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src13_src.reg
[Tue Jun 26 14:34:54 2012] Extracting stamp from image fullrun_mos2_xmm0554500401_pi300-10000_cl_sm2.00.img.gz, (235, 244) - (310, 319)
[Tue Jun 26 14:34:54 2012] XMMSAS bgd. selection expression = annulus(23686.317596, 24448.998657, 1087.500000, 2175.000000, X, Y) && !ellipse(23802.286700, 25767.459400, 371.859211, 371.859211, 0.000000, X, Y) && !ellipse(23782.747200, 22591.549800, 326.631209, 326.631209, 0.000000, X, Y) && !ellipse(24778.907288, 23893.101898, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 26 14:34:54 2012] Writing fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src13.gif
[Tue Jun 26 14:37:53 2012] Mean detx,y = (-1291.05, -673.87) 
[Tue Jun 26 14:37:55 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 14:38:08 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 14:38:08 2012] Setting source spectrum file to fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Jun 26 14:38:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Jun 26 14:50:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 26 14:50:56 2012] rmf not generated due to insufficient counts
[Tue Jun 26 14:52:58 2012] Updating aperture counts using extracted products
[Tue Jun 26 14:52:59 2012] Error reading totcts from fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Jun 26 14:52:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 14:52:59 2012] Using photon index=1.80, rate=0.00384, arf fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src13.arf
[Tue Jun 26 14:52:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 14:52:59 2012] Updating source flux to 3.7e-14
[Tue Jun 26 14:53:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting