[Tue Jun 26 10:47:45 2012] Detection parameters:
  Position = (475.3, 251.1) = 7 59 0.46 23 22 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.7 +/- 13.7
  Background counts = 40.1
  Rate = 0.002 +/- 0.0004

[Tue Jun 26 10:47:46 2012] Off-axis axis estimate = 13.27'
[Tue Jun 26 11:50:58 2012] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 11:50:58 2012] Initial guess for spatial extent in simple fitting = 13.06"
[Tue Jun 26 11:50:58 2012] source mask rpix=3.0, npix_max = 49, mask sum = 45, frac = 0.917
[Tue Jun 26 11:50:58 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 13.06"
[Tue Jun 26 12:29:56 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_src16.ximg exists
[Tue Jun 26 12:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_src16.csv
[Tue Jun 26 12:29:56 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Jun 26 12:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_src16.csv
[Tue Jun 26 12:29:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 12:29:56 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Jun 26 12:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Jun 26 12:29:56 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Jun 26 12:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Jun 26 12:29:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 12:30:11 2012] Warning, spatial fit 16 centroid is now closest to src. 9
[Tue Jun 26 12:30:11 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 12:30:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 12:30:11 2012] Assessing source extent using major
[Tue Jun 26 12:30:11 2012] Source does appear to be extended
[Tue Jun 26 12:30:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 12:30:11 2012] Source is confused with source 4
[Tue Jun 26 13:20:21 2012] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 13:20:21 2012] Initial guess for spatial extent in simple fitting = 13.06"
[Tue Jun 26 13:20:21 2012] source mask rpix=3.0, npix_max = 49, mask sum = 45, frac = 0.917
[Tue Jun 26 13:20:21 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 13.06"
[Tue Jun 26 13:51:18 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src13.ximg exists
[Tue Jun 26 13:51:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src13.csv
[Tue Jun 26 13:51:18 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Jun 26 13:51:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src13.csv
[Tue Jun 26 13:51:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 13:51:18 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Jun 26 13:51:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Jun 26 13:51:18 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Jun 26 13:51:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Jun 26 13:51:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 13:51:26 2012] Warning, spatial fit 13 centroid is now closest to src. 9
[Tue Jun 26 13:51:26 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 13:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 13:51:26 2012] Assessing source extent using major
[Tue Jun 26 13:51:26 2012] Source does appear to be extended
[Tue Jun 26 13:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 14:34:54 2012] XMMSAS src. selection expression = ellipse(41299.057129, 21796.373489, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 26 14:34:54 2012] Writing source region out to fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src10_src.reg
[Tue Jun 26 14:34:54 2012] Extracting stamp from image fullrun_mos2_xmm0554500401_pi300-10000_cl_sm2.00.img.gz, (438, 214) - (513, 289)
[Tue Jun 26 14:34:54 2012] XMMSAS bgd. selection expression = annulus(41299.057129, 21796.373489, 1087.500000, 2175.000000, X, Y) && !ellipse(41735.514740, 22033.441055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41661.192505, 23063.498169, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 26 14:34:54 2012] Writing fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src10.gif
[Tue Jun 26 14:39:18 2012] Mean detx,y = (15359.42, 5358.38) 
[Tue Jun 26 14:39:20 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 14:39:34 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 14:39:34 2012] Setting source spectrum file to fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jun 26 14:39:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Jun 26 14:51:38 2012] Not generating rmf since there are only 55 counts
[Tue Jun 26 14:51:38 2012] rmf not generated due to insufficient counts
[Tue Jun 26 14:52:59 2012] Updating aperture counts using extracted products
[Tue Jun 26 14:52:59 2012] Error reading totcts from fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jun 26 14:52:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 14:52:59 2012] Using photon index=1.80, rate=0.0018, arf fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src10.arf
[Tue Jun 26 14:52:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 14:52:59 2012] Updating source flux to 6.9e-14
[Tue Jun 26 14:53:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting