[Tue Jun 26 10:47:45 2012] Detection parameters:
  Position = (307.7, 257.2) = 7 59 53.40 23 23 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12801.8 +/- 137.8
  Background counts = 99.4
  Rate = 0.5 +/- 0.005

[Tue Jun 26 10:47:46 2012] Off-axis axis estimate = 3.07'
[Tue Jun 26 11:50:58 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 11:50:58 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Tue Jun 26 11:50:58 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.921
[Tue Jun 26 11:50:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.96"
[Tue Jun 26 12:29:56 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 26 12:29:56 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 26 12:29:56 2012] Fit fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Jun 26 12:29:56 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 26 12:29:56 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 26 12:29:56 2012] Fit fullrun_mos2_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 26 12:30:11 2012] Spatial fit model total counts = 6564.080000, observed total counts = 6550.000000
[Tue Jun 26 12:30:11 2012] Offset between fit and detection position for source 1 = 0.116902 pixels
[Tue Jun 26 12:30:11 2012] 6566.720000 total counts/ 1347.660000 bgd. counts: snr = 142.168087
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.116902 pixels
  Position = (307.8, 257.3) = 7 59 53.38 23 23 24.9
  Extent = 5.8 (5.6-5.9)" x 5.1 (4.9-5.2)", rotation angle = 349 (158-356) degrees
  Source counts = 5219.1 +/- 81.0
  Background counts = 1347.7
  Rate = 0.3 +/- 0.005
[Tue Jun 26 12:30:11 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 12:30:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 12:30:11 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 12:30:11 2012] Source does appear to be extended
[Tue Jun 26 12:30:11 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.07
[Tue Jun 26 13:20:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 26 13:20:21 2012] Initial guess for spatial extent in simple fitting = 5.41"
[Tue Jun 26 13:20:21 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.988
[Tue Jun 26 13:20:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.41"
[Tue Jun 26 13:51:18 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 26 13:51:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src1.csv
[Tue Jun 26 13:51:18 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 26 13:51:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src1.csv
[Tue Jun 26 13:51:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 13:51:18 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 26 13:51:18 2012] fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 26 13:51:18 2012] Fit fullrun_mos2_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 26 13:51:26 2012] Spatial fit model total counts = 6572.240000, observed total counts = 6545.000000
[Tue Jun 26 13:51:26 2012] Offset between fit and detection position for source 1 = 0.022350 pixels
[Tue Jun 26 13:51:26 2012] 6604.040000 total counts/ 1407.100000 bgd. counts: snr = 138.543202
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.022350 pixels
  Position = (307.8, 257.2) = 7 59 53.39 23 23 24.8
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 5196.9 +/- 81.3
  Background counts = 1407.1
  Rate = 0.3 +/- 0.005
[Tue Jun 26 13:51:26 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 13:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 13:51:26 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 13:51:26 2012] Source does appear to be extended
[Tue Jun 26 13:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 14:34:54 2012] Counts = 5196.940000, rescaling region sizes by 2.000000
[Tue Jun 26 14:34:54 2012] XMMSAS src. selection expression = ellipse(26726.049000, 22332.250000, 647.086819, 647.086819, 0.000000, X, Y)
[Tue Jun 26 14:34:54 2012] Writing source region out to fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 26 14:34:54 2012] Extracting stamp from image fullrun_mos2_xmm0554500401_pi300-10000_cl_sm2.00.img.gz, (271, 220) - (345, 294)
[Tue Jun 26 14:34:54 2012] XMMSAS bgd. selection expression = annulus(26726.049000, 22332.250000, 2156.956062, 4313.912124, X, Y) && !ellipse(23802.286700, 25767.459400, 371.859211, 371.859211, 0.000000, X, Y) && !ellipse(30350.794250, 18066.916229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23782.747200, 22591.549800, 326.631209, 326.631209, 0.000000, X, Y) && !ellipse(23686.317596, 24448.998657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24778.907288, 23893.101898, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 26 14:34:54 2012] Writing fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src1.gif
[Tue Jun 26 14:34:57 2012] Mean detx,y = (1272.01, 2039.92) 
[Tue Jun 26 14:35:00 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 14:35:18 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 14:35:18 2012] Setting source spectrum file to fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 26 14:35:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 26 14:52:58 2012] Updating aperture counts using extracted products
[Tue Jun 26 14:52:58 2012] Error reading totcts from fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 26 14:52:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 14:52:59 2012] Using photon index=1.80, rate=0.296, arf fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src1.arf
[Tue Jun 26 14:52:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 14:52:59 2012] Updating source flux to 3.1e-12
[Tue Jun 26 14:54:27 2012] Reading fit data from xmm0554500401/analysis//spectral/fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 26 14:54:27 2012] Spectral fit parameter nH value = 1.87856e+22
[Tue Jun 26 14:54:27 2012] Spectral fit parameter PhoIndex value = 1.85823
[Tue Jun 26 14:54:27 2012] Failed to get F(0.3-8.0) from xmm0554500401/analysis//spectral/fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 26 14:54:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 14:54:27 2012] Using Nh = 1.9e+22, photon index=1.86, rate=0.296, arf fullrun_mos2_xmm0554500401_pi300-10000_pass1_cl_src1.arf
[Tue Jun 26 14:54:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 14:54:27 2012] Updating source flux to 6e-12