[Tue Jun 26 10:47:11 2012] Detection parameters:
  Position = (298.7, 262.7) = 7 59 56.26 23 23 40.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.3 +/- 20.1
  Background counts = 120.3
  Rate = 0.004 +/- 0.0008

[Tue Jun 26 10:47:11 2012] Off-axis axis estimate = 2.59'
[Tue Jun 26 11:20:48 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 11:20:48 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Tue Jun 26 11:20:48 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.965
[Tue Jun 26 11:20:48 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.72"
[Tue Jun 26 11:50:58 2012] fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_src9.ximg exists
[Tue Jun 26 11:50:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_src9.csv
[Tue Jun 26 11:50:58 2012] fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Jun 26 11:50:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_src9.csv
[Tue Jun 26 11:50:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 11:50:58 2012] fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Jun 26 11:50:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue Jun 26 11:50:58 2012] fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Jun 26 11:50:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue Jun 26 11:50:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 12:30:06 2012] Source 8 is offset by -6.434218 and 5.646907 pixels which is larger than
2 X fitted extent = 2.308952 x 2.308952, not incorporating fit results
[Tue Jun 26 12:30:06 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 12:30:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 12:30:06 2012] Assessing source extent using major
[Tue Jun 26 12:30:06 2012] Source does appear to be extended
[Tue Jun 26 12:30:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 12:58:23 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 12:58:23 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Tue Jun 26 12:58:23 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.965
[Tue Jun 26 12:58:23 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.72"
[Tue Jun 26 13:20:21 2012] fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_src8.ximg exists
[Tue Jun 26 13:20:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_src8.csv
[Tue Jun 26 13:20:21 2012] fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue Jun 26 13:20:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_src8.csv
[Tue Jun 26 13:20:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 13:20:21 2012] fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue Jun 26 13:20:21 2012] fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Jun 26 13:20:21 2012] Fit fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Jun 26 13:51:24 2012] Source 8 is offset by -6.434218 and 5.607367 pixels which is larger than
2 X fitted extent = 3.029655 x 3.029655, not incorporating fit results
[Tue Jun 26 13:51:24 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 13:51:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 13:51:24 2012] Assessing source extent using major
[Tue Jun 26 13:51:24 2012] Source does appear to be extended
[Tue Jun 26 13:51:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 14:22:43 2012] XMMSAS src. selection expression = ellipse(25935.661072, 22805.978912, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 26 14:22:43 2012] Writing source region out to fullrun_mos1_xmm0554500401_pi300-10000_pass1_cl_src8_src.reg
[Tue Jun 26 14:22:43 2012] Extracting stamp from image fullrun_mos1_xmm0554500401_pi300-10000_cl_sm2.00.img.gz, (261, 225) - (336, 300)
[Tue Jun 26 14:22:43 2012] XMMSAS bgd. selection expression = annulus(25935.661072, 22805.978912, 1087.500000, 2175.000000, X, Y) && !ellipse(26720.157800, 22324.654200, 453.471213, 416.304812, 342.754432, X, Y) && !ellipse(23855.053000, 22575.748800, 406.068012, 406.068012, 0.000000, X, Y)
[Tue Jun 26 14:22:43 2012] Writing fullrun_mos1_xmm0554500401_pi300-10000_pass1_cl_src8.gif
[Tue Jun 26 14:25:05 2012] Mean detx,y = (1834.65, -950.80) 
[Tue Jun 26 14:25:07 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 14:25:19 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 14:25:19 2012] Setting source spectrum file to fullrun_mos1_xmm0554500401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Jun 26 14:25:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554500401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue Jun 26 14:34:23 2012] Not generating rmf since there are only 89 counts
[Tue Jun 26 14:34:23 2012] rmf not generated due to insufficient counts
[Tue Jun 26 14:52:57 2012] Updating aperture counts using extracted products
[Tue Jun 26 14:52:57 2012] Error reading totcts from fullrun_mos1_xmm0554500401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Jun 26 14:52:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 14:52:58 2012] Using photon index=1.80, rate=0.00353, arf fullrun_mos1_xmm0554500401_pi300-10000_pass1_cl_src8.arf
[Tue Jun 26 14:52:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 14:52:58 2012] Updating source flux to 3.7e-14
[Tue Jun 26 14:53:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting