[Tue Jun 26 10:47:11 2012] Detection parameters:
  Position = (487.4, 282.0) = 7 58 56.60 23 25 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.9 +/- 15.2
  Background counts = 63.5
  Rate = 0.003 +/- 0.0005

[Tue Jun 26 10:47:11 2012] Off-axis axis estimate = 13.75'
[Tue Jun 26 11:20:48 2012] Using EEF radius (= 13.31 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 11:20:48 2012] Initial guess for spatial extent in simple fitting = 13.31"
[Tue Jun 26 11:20:48 2012] source mask rpix=3.1, npix_max = 50, mask sum = 51, frac = 1.007
[Tue Jun 26 11:20:48 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.31"
[Tue Jun 26 11:50:58 2012] fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_src11.ximg exists
[Tue Jun 26 11:50:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_src11.csv
[Tue Jun 26 11:50:58 2012] fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Jun 26 11:50:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_src11.csv
[Tue Jun 26 11:50:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 11:50:58 2012] fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Jun 26 11:50:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Jun 26 11:50:58 2012] fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Jun 26 11:50:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Jun 26 11:50:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554500401_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 12:30:06 2012] Spatial fit model total counts = 108.731000, observed total counts = 77.000000
[Tue Jun 26 12:30:06 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 26 12:30:06 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 12:30:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 12:30:06 2012] Assessing source extent using major
[Tue Jun 26 12:30:06 2012] Source does appear to be extended
[Tue Jun 26 12:30:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 12:58:23 2012] Using EEF radius (= 13.31 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 12:58:23 2012] Initial guess for spatial extent in simple fitting = 13.31"
[Tue Jun 26 12:58:23 2012] source mask rpix=3.1, npix_max = 50, mask sum = 51, frac = 1.007
[Tue Jun 26 12:58:23 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.31"
[Tue Jun 26 13:20:21 2012] fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_src10.ximg exists
[Tue Jun 26 13:20:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_src10.csv
[Tue Jun 26 13:20:21 2012] fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Jun 26 13:20:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_src10.csv
[Tue Jun 26 13:20:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 13:20:21 2012] fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Jun 26 13:20:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jun 26 13:20:21 2012] fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jun 26 13:20:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jun 26 13:20:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554500401_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 13:51:24 2012] Spatial fit model total counts = 108.193000, observed total counts = 77.000000
[Tue Jun 26 13:51:24 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 26 13:51:24 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 13:51:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 13:51:24 2012] Assessing source extent using major
[Tue Jun 26 13:51:24 2012] Source does appear to be extended
[Tue Jun 26 13:51:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 14:22:43 2012] XMMSAS src. selection expression = ellipse(42358.366028, 24483.123749, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 26 14:22:43 2012] Writing source region out to fullrun_mos1_xmm0554500401_pi300-10000_pass1_cl_src7_src.reg
[Tue Jun 26 14:22:43 2012] Extracting stamp from image fullrun_mos1_xmm0554500401_pi300-10000_cl_sm2.00.img.gz, (450, 244) - (525, 319)
[Tue Jun 26 14:22:43 2012] XMMSAS bgd. selection expression = annulus(42358.366028, 24483.123749, 1087.500000, 2175.000000, X, Y) && !ellipse(42159.591949, 22920.384125, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 26 14:22:43 2012] Writing fullrun_mos1_xmm0554500401_pi300-10000_pass1_cl_src7.gif
[Tue Jun 26 14:25:44 2012] Mean detx,y = (3326.92, -16987.38) 
[Tue Jun 26 14:25:45 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 14:26:03 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 14:26:04 2012] Setting source spectrum file to fullrun_mos1_xmm0554500401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jun 26 14:26:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554500401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Jun 26 14:34:40 2012] Not generating rmf since there are only 80 counts
[Tue Jun 26 14:34:40 2012] rmf not generated due to insufficient counts
[Tue Jun 26 14:52:58 2012] Updating aperture counts using extracted products
[Tue Jun 26 14:52:58 2012] Error reading totcts from fullrun_mos1_xmm0554500401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jun 26 14:52:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 14:52:58 2012] Using photon index=1.80, rate=0.00261, arf fullrun_mos1_xmm0554500401_pi300-10000_pass1_cl_src7.arf
[Tue Jun 26 14:52:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 14:52:58 2012] Updating source flux to 1.2e-13
[Tue Jun 26 14:53:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting