[Wed Mar  7 20:57:44 2012] Detection parameters:
  Position = (234.2, 398.3) = 5 48 51.70 -47 39 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194.5 +/- 18.1
  Background counts = 20.1
  Rate = 0.007 +/- 0.0007

[Wed Mar  7 20:57:45 2012] Off-axis axis estimate = 8.61'
[Wed Mar  7 22:42:44 2012] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 22:42:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar  7 22:42:44 2012] Initial guess for spatial extent in simple fitting = 10.73"
[Wed Mar  7 22:42:44 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.022
[Wed Mar  7 22:42:44 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.73"
[Wed Mar  7 23:16:24 2012] fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_src3.ximg exists
[Wed Mar  7 23:16:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_src3.csv
[Wed Mar  7 23:16:24 2012] fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Mar  7 23:16:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_src3.csv
[Wed Mar  7 23:16:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 23:16:24 2012] fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Mar  7 23:16:24 2012] fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Mar  7 23:16:24 2012] Fit fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Mar  8 00:08:05 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.582524 pixels away
[Thu Mar  8 00:08:06 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 00:08:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 00:08:06 2012] Assessing source extent using major
[Thu Mar  8 00:08:06 2012] Source does appear to be extended
[Thu Mar  8 00:08:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 01:30:46 2012] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 01:30:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar  8 01:30:46 2012] Initial guess for spatial extent in simple fitting = 10.73"
[Thu Mar  8 01:30:46 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.022
[Thu Mar  8 01:30:46 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.73"
[Thu Mar  8 02:00:07 2012] fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_src3.ximg exists
[Thu Mar  8 02:00:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_src3.csv
[Thu Mar  8 02:00:07 2012] fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Mar  8 02:00:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_src3.csv
[Thu Mar  8 02:00:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 02:00:08 2012] fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Mar  8 02:00:08 2012] fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Mar  8 02:00:08 2012] Fit fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Mar  8 02:43:03 2012] Spatial fit model total counts = 411.146000, observed total counts = 405.000000
[Thu Mar  8 02:43:03 2012] Offset between fit and detection position for source 6 = 0.329118 pixels
[Thu Mar  8 02:43:03 2012] 407.920000 total counts/ 231.587000 bgd. counts: snr = 11.587147
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.329118 pixels
  Position = (234.1, 398.6) = 5 48 51.74 -47 39 50.2
  Extent = 7.7 (6.1-9.2)", rotation angle = 0
  Source counts = 176.3 +/- 20.2
  Background counts = 231.6
  Rate = 0.004 +/- 0.0005
[Thu Mar  8 02:43:03 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 02:43:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 02:43:03 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 02:43:03 2012] Source does appear to be extended
[Thu Mar  8 02:43:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 03:58:07 2012] XMMSAS src. selection expression = ellipse(20316.917380, 34629.249400, 461.923813, 461.923813, 0.000000, X, Y)
[Thu Mar  8 03:58:07 2012] Writing source region out to fullrun_mos1_xmm0554500301_pi300-10000_pass1_cl_src6_src.reg
[Thu Mar  8 03:58:07 2012] Extracting stamp from image fullrun_mos1_xmm0554500301_pi300-10000_cl_sm2.00.img.gz, (208, 372) - (261, 425)
[Thu Mar  8 03:58:07 2012] XMMSAS bgd. selection expression = annulus(20316.917380, 34629.249400, 769.873022, 1539.746044, X, Y)
[Thu Mar  8 03:58:07 2012] Writing fullrun_mos1_xmm0554500301_pi300-10000_pass1_cl_src6.gif
[Thu Mar  8 03:58:47 2012] Mean detx,y = (8130.97, 2680.56) 
[Thu Mar  8 03:58:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar  8 03:59:01 2012] Binned source spectrum to 10 counts/bin
[Thu Mar  8 03:59:01 2012] Setting source spectrum file to fullrun_mos1_xmm0554500301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Mar  8 03:59:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554500301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Mar  8 04:56:55 2012] Updating aperture counts using extracted products
[Thu Mar  8 04:56:55 2012] Error reading totcts from fullrun_mos1_xmm0554500301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Mar  8 04:56:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 04:56:56 2012] Using photon index=1.80, rate=0.00428, arf fullrun_mos1_xmm0554500301_pi300-10000_pass1_cl_src6.arf
[Thu Mar  8 04:56:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 04:56:56 2012] Updating source flux to 6.6e-14