[Wed Mar  7 20:57:44 2012] Detection parameters:
  Position = (301.2, 283.2) = 5 48 22.82 -47 48 11.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 296.9 +/- 22.0
  Background counts = 21.0
  Rate = 0.008 +/- 0.0006

[Wed Mar  7 20:57:45 2012] Off-axis axis estimate = 1.12'
[Wed Mar  7 22:42:44 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 22:42:44 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Wed Mar  7 22:42:44 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.901
[Wed Mar  7 22:42:44 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 6.99"
[Wed Mar  7 23:16:24 2012] fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_src2.ximg exists
[Wed Mar  7 23:16:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_src2.csv
[Wed Mar  7 23:16:24 2012] fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Mar  7 23:16:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_src2.csv
[Wed Mar  7 23:16:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 23:16:24 2012] fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Mar  7 23:16:24 2012] fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Mar  7 23:16:24 2012] Fit fullrun_mos1_xmm0554500301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Mar  8 00:08:05 2012] Source 1 is offset by 6.660638 and -7.198358 pixels which is larger than
2 X fitted extent = 0.803347 x 0.803347, not incorporating fit results
[Thu Mar  8 00:08:06 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 00:08:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 00:08:06 2012] Assessing source extent using major
[Thu Mar  8 00:08:06 2012] Source does appear to be extended
[Thu Mar  8 00:08:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 01:30:46 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 01:30:46 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Thu Mar  8 01:30:46 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.901
[Thu Mar  8 01:30:46 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.99"
[Thu Mar  8 02:00:07 2012] fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_src2.ximg exists
[Thu Mar  8 02:00:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_src2.csv
[Thu Mar  8 02:00:07 2012] fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Mar  8 02:00:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_src2.csv
[Thu Mar  8 02:00:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 02:00:08 2012] fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Mar  8 02:00:08 2012] fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Mar  8 02:00:08 2012] Fit fullrun_mos1_xmm0554500301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Mar  8 02:43:03 2012] Spatial fit model total counts = 467.135000, observed total counts = 467.000000
[Thu Mar  8 02:43:03 2012] Offset between fit and detection position for source 1 = 0.116193 pixels
[Thu Mar  8 02:43:03 2012] 469.764000 total counts/ 273.403000 bgd. counts: snr = 11.875546
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.116193 pixels
  Position = (301.2, 283.3) = 5 48 22.84 -47 48 11.8
  Extent = 5.2 (4.5-5.8)", rotation angle = 0
  Source counts = 196.4 +/- 21.7
  Background counts = 273.4
  Rate = 0.005 +/- 0.0005
[Thu Mar  8 02:43:03 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 02:43:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 02:43:03 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 02:43:03 2012] Source does appear to be extended
[Thu Mar  8 02:43:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 03:58:07 2012] XMMSAS src. selection expression = ellipse(26155.229520, 24601.812800, 313.258809, 313.258809, 0.000000, X, Y)
[Thu Mar  8 03:58:07 2012] Writing source region out to fullrun_mos1_xmm0554500301_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar  8 03:58:07 2012] Extracting stamp from image fullrun_mos1_xmm0554500301_pi300-10000_cl_sm2.00.img.gz, (283, 265) - (319, 301)
[Thu Mar  8 03:58:07 2012] XMMSAS bgd. selection expression = annulus(26155.229520, 24601.812800, 522.098015, 1044.196030, X, Y)
[Thu Mar  8 03:58:07 2012] Writing fullrun_mos1_xmm0554500301_pi300-10000_pass1_cl_src1.gif
[Thu Mar  8 03:58:32 2012] Mean detx,y = (-2343.17, -2317.20) 
[Thu Mar  8 03:58:33 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar  8 03:58:42 2012] Binned source spectrum to 10 counts/bin
[Thu Mar  8 03:58:42 2012] Setting source spectrum file to fullrun_mos1_xmm0554500301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar  8 03:58:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554500301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar  8 04:56:55 2012] Updating aperture counts using extracted products
[Thu Mar  8 04:56:55 2012] Error reading totcts from fullrun_mos1_xmm0554500301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar  8 04:56:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 04:56:56 2012] Using photon index=1.80, rate=0.00477, arf fullrun_mos1_xmm0554500301_pi300-10000_pass1_cl_src1.arf
[Thu Mar  8 04:56:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 04:56:56 2012] Updating source flux to 6.3e-14
[Thu Mar  8 04:57:03 2012] Flag b found in src. 1 procflags, skipping spectral fitting