[Sun Jul 22 23:51:31 2012] Detection parameters:
  Position = (290.4, 276.9) = 11 19 8.73 21 19 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71010.3 +/- 311.1
  Background counts = 122.9
  Rate = 0.9 +/- 0.004

[Sun Jul 22 23:51:32 2012] Off-axis axis estimate = 1.66'
[Mon Jul 23 01:00:40 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 01:00:40 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Jul 23 01:00:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Mon Jul 23 01:00:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Mon Jul 23 01:43:48 2012] fullrun_mos2_xmm0554380301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul 23 01:43:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554380301_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 01:43:48 2012] fullrun_mos2_xmm0554380301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul 23 01:43:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554380301_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 01:43:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554380301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554380301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 01:43:48 2012] fullrun_mos2_xmm0554380301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul 23 01:43:48 2012] fullrun_mos2_xmm0554380301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul 23 01:43:48 2012] Fit fullrun_mos2_xmm0554380301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jul 23 01:43:55 2012] Spatial fit model total counts = 60627.000000, observed total counts = 59358.000000
[Mon Jul 23 01:43:55 2012] Offset between fit and detection position for source 2 = 0.049180 pixels
[Mon Jul 23 01:43:55 2012] 60759.800000 total counts/ 14183.800000 bgd. counts: snr = 391.080254
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.049180 pixels
  Position = (290.5, 276.9) = 11 19 8.72 21 19 18.2
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 46576.0 +/- 246.5
  Background counts = 14183.8
  Rate = 0.6 +/- 0.003
[Mon Jul 23 01:43:55 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 01:43:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 01:43:55 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 01:43:55 2012] Source does appear to be extended
[Mon Jul 23 01:43:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 02:53:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 02:53:37 2012] Initial guess for spatial extent in simple fitting = 5.28"
[Mon Jul 23 02:53:37 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.021
[Mon Jul 23 02:53:37 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.28"
[Mon Jul 23 03:08:57 2012] fullrun_mos2_xmm0554380301_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 23 03:08:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554380301_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 03:08:57 2012] fullrun_mos2_xmm0554380301_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 23 03:08:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554380301_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 03:08:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554380301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554380301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 03:08:58 2012] fullrun_mos2_xmm0554380301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 23 03:08:58 2012] fullrun_mos2_xmm0554380301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 23 03:08:58 2012] Fit fullrun_mos2_xmm0554380301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul 23 03:09:02 2012] Spatial fit model total counts = 60528.700000, observed total counts = 59358.000000
[Mon Jul 23 03:09:02 2012] Offset between fit and detection position for source 2 = 0.002430 pixels
[Mon Jul 23 03:09:02 2012] 60666.900000 total counts/ 14087.500000 bgd. counts: snr = 392.443306
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.002430 pixels
  Position = (290.5, 276.9) = 11 19 8.72 21 19 18.2
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 46579.4 +/- 246.3
  Background counts = 14087.5
  Rate = 0.6 +/- 0.003
[Mon Jul 23 03:09:02 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 03:09:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 03:09:02 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 03:09:02 2012] Source does appear to be extended
[Mon Jul 23 03:09:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 05:05:11 2012] Counts = 46579.400000, rescaling region sizes by 3.000000
[Mon Jul 23 05:05:11 2012] XMMSAS src. selection expression = ellipse(25220.656200, 24042.503400, 952.729227, 952.729227, 0.000000, X, Y)
[Mon Jul 23 05:05:11 2012] Writing source region out to fullrun_mos2_xmm0554380301_pi300-10000_pass1_cl_src2_src.reg
[Mon Jul 23 05:05:11 2012] Extracting stamp from image fullrun_mos2_xmm0554380301_pi300-10000_cl_sm2.00.img.gz, (236, 222) - (345, 332)
[Mon Jul 23 05:05:11 2012] XMMSAS bgd. selection expression = annulus(25220.656200, 24042.503400, 4763.646137, 9527.292274, X, Y) && !ellipse(15851.391190, 19206.661896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32199.854800, 26990.396800, 479.299214, 479.299214, 0.000000, X, Y) && !ellipse(15301.671356, 32740.368408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32593.245270, 25157.992371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24762.661163, 23440.613220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16059.914500, 33131.713800, 623.351218, 351.735210, 341.069000, X, Y) && !ellipse(33146.667542, 31526.842133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24282.512390, 23962.406128, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 05:05:11 2012] Writing fullrun_mos2_xmm0554380301_pi300-10000_pass1_cl_src2.gif
[Mon Jul 23 05:05:22 2012] Mean detx,y = (-66.30, -86.33) 
[Mon Jul 23 05:05:23 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 05:08:33 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 05:08:33 2012] Setting source spectrum file to fullrun_mos2_xmm0554380301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jul 23 05:08:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554380301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Jul 23 05:37:13 2012] Updating aperture counts using extracted products
[Mon Jul 23 05:37:13 2012] Error reading totcts from fullrun_mos2_xmm0554380301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jul 23 05:37:13 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 05:37:13 2012] Using photon index=1.80, rate=0.634, arf fullrun_mos2_xmm0554380301_pi300-10000_pass1_cl_src2.arf
[Mon Jul 23 05:37:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 05:37:13 2012] Updating source flux to 6.5e-12
[Mon Jul 23 05:37:50 2012] Reading fit data from xmm0554380301/analysis//spectral/fullrun_mos2_xmm0554380301_pi300-10000_pass1_cl_src2_pl.csv
[Mon Jul 23 05:37:50 2012] Spectral fit parameter nH value = 6.61275e+12
[Mon Jul 23 05:37:50 2012] Spectral fit parameter PhoIndex value = 2.31166
[Mon Jul 23 05:37:50 2012] Failed to get F(0.3-8.0) from xmm0554380301/analysis//spectral/fullrun_mos2_xmm0554380301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Jul 23 05:37:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 05:37:50 2012] Using Nh = 6.6e+12, photon index=2.31, rate=0.634, arf fullrun_mos2_xmm0554380301_pi300-10000_pass1_cl_src2.arf
[Mon Jul 23 05:37:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 05:37:50 2012] Updating source flux to 5.3e-12