[Thu Mar 29 03:53:22 2012] Detection parameters:
  Position = (324.7, 512.2) = 11 19 1.96 21 33 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.9 +/- 25.6
  Background counts = 92.7
  Rate = 0.001 +/- 0.0003

[Thu Mar 29 03:53:23 2012] Off-axis axis estimate = 15.62'
[Thu Mar 29 05:16:08 2012] Using EEF radius (= 14.24 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 05:16:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 29 05:16:08 2012] Initial guess for spatial extent in simple fitting = 14.24"
[Thu Mar 29 05:16:08 2012] source mask rpix=3.3, npix_max = 56, mask sum = 53, frac = 0.931
[Thu Mar 29 05:16:08 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 14.24"
[Thu Mar 29 08:06:08 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src31.ximg exists
[Thu Mar 29 08:06:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src31.csv
[Thu Mar 29 08:06:08 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu Mar 29 08:06:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src31.csv
[Thu Mar 29 08:06:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 08:06:09 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu Mar 29 08:06:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Thu Mar 29 08:06:09 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu Mar 29 08:06:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Thu Mar 29 08:06:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 08:06:33 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.437674 pixels away
[Thu Mar 29 08:06:33 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 08:06:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 08:06:33 2012] Assessing source extent using major
[Thu Mar 29 08:06:33 2012] Source does appear to be extended
[Thu Mar 29 08:06:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 08:06:33 2012] Deleting source due to low Poisson probability 0.9