[Thu Mar 29 03:53:23 2012] Detection parameters:
  Position = (150.7, 205.6) = 11 19 56.11 21 10 52.9
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 57.9 +/- 17.4
  Background counts = 300.0
  Rate = 0.0007 +/- 0.0002

[Thu Mar 29 03:53:23 2012] Off-axis axis estimate = 12.65'
[Thu Mar 29 05:16:08 2012] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 05:16:08 2012] Initial guess for spatial extent in simple fitting = 12.75"
[Thu Mar 29 05:16:08 2012] source mask rpix=2.9, npix_max = 47, mask sum = 47, frac = 0.998
[Thu Mar 29 05:16:08 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 12.75"
[Thu Mar 29 08:06:08 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src42.ximg exists
[Thu Mar 29 08:06:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src42.csv
[Thu Mar 29 08:06:08 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src42_1.ximg exists
[Thu Mar 29 08:06:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src42.csv
[Thu Mar 29 08:06:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 08:06:09 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Thu Mar 29 08:06:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Thu Mar 29 08:06:09 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Thu Mar 29 08:06:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Thu Mar 29 08:06:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 08:06:15 2012] Warning, spatial fit 7 centroid is now closest to src. 6
[Thu Mar 29 08:06:33 2012] Warning, spatial fit 25 centroid is now closest to src. 27
[Thu Mar 29 08:06:33 2012] Warning, spatial fit 41 centroid is now closest to src. 40
[Thu Mar 29 08:06:33 2012] Source 43 is offset by 0.493993 and 2.697550 pixels which is larger than
2 X fitted extent = 1.465885 x 1.465885, not incorporating fit results
[Thu Mar 29 08:06:33 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 08:06:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 08:06:33 2012] Assessing source extent using major
[Thu Mar 29 08:06:33 2012] Source does appear to be extended
[Thu Mar 29 08:06:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 08:06:33 2012] Deleting source due to low Poisson probability 0.8