[Thu Mar 29 03:53:23 2012] Detection parameters:
  Position = (477.9, 232.1) = 11 18 14.35 21 12 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.9 +/- 18.6
  Background counts = 68.1
  Rate = 0.001 +/- 0.0002

[Thu Mar 29 03:53:23 2012] Off-axis axis estimate = 13.87'
[Thu Mar 29 05:16:08 2012] Using EEF radius (= 13.36 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 05:16:08 2012] Initial guess for spatial extent in simple fitting = 13.36"
[Thu Mar 29 05:16:08 2012] source mask rpix=3.1, npix_max = 51, mask sum = 48, frac = 0.940
[Thu Mar 29 05:16:08 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 13.36"
[Thu Mar 29 08:06:07 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src24.ximg exists
[Thu Mar 29 08:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src24.csv
[Thu Mar 29 08:06:07 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src24_1.ximg exists
[Thu Mar 29 08:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src24.csv
[Thu Mar 29 08:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 08:06:08 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Thu Mar 29 08:06:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Thu Mar 29 08:06:08 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Thu Mar 29 08:06:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Thu Mar 29 08:06:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 08:06:33 2012] Source 40 is offset by -0.430023 and -2.366428 pixels which is larger than
2 X fitted extent = 1.536046 x 1.536046, not incorporating fit results
[Thu Mar 29 08:06:33 2012] Spatial fit model total counts = 362.440000, observed total counts = 354.000000
[Thu Mar 29 08:06:33 2012] Offset between fit and detection position for source 40 = 0.390391 pixels
[Thu Mar 29 08:06:33 2012] Warning, changing simple spatial fit ID from 24 to 41
[Thu Mar 29 08:06:33 2012] 363.372760 total counts/ 353.850000 bgd. counts: snr = 0.506236
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.390391 pixels
  Position = (478.3, 232.1) = 11 18 14.23 21 12 51.7
  Extent = 9.4" x 3.2", rotation angle = 90
  Source counts = 9.5 +/- 19.1
  Background counts = 353.9
  Rate = 0.0001 +/- 0.0002
  Deleting source due to low Poisson probability