[Thu Mar 29 03:53:22 2012] Detection parameters:
  Position = (480.2, 297.2) = 11 18 13.59 21 17 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.7 +/- 15.3
  Background counts = 77.5
  Rate = 0.001 +/- 0.0002

[Thu Mar 29 03:53:23 2012] Off-axis axis estimate = 13.18'
[Thu Mar 29 05:16:08 2012] Using EEF radius (= 13.02 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 05:16:08 2012] Initial guess for spatial extent in simple fitting = 13.02"
[Thu Mar 29 05:16:08 2012] source mask rpix=3.0, npix_max = 48, mask sum = 38, frac = 0.779
[Thu Mar 29 05:16:08 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 13.02"
[Thu Mar 29 08:06:08 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src36.ximg exists
[Thu Mar 29 08:06:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src36.csv
[Thu Mar 29 08:06:08 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src36_1.ximg exists
[Thu Mar 29 08:06:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src36.csv
[Thu Mar 29 08:06:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 08:06:09 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Thu Mar 29 08:06:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Thu Mar 29 08:06:09 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Thu Mar 29 08:06:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Thu Mar 29 08:06:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 08:06:33 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 16.914317 pixels away
[Thu Mar 29 08:06:33 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 08:06:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 08:06:33 2012] Assessing source extent using major
[Thu Mar 29 08:06:33 2012] Source does appear to be extended
[Thu Mar 29 08:06:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 08:06:33 2012] Deleting source due to low Poisson probability 0.9