[Thu Mar 29 03:53:22 2012] Detection parameters:
  Position = (303.1, 320.9) = 11 19 8.71 21 19 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122363.5 +/- 419.3
  Background counts = 161.8
  Rate = 2 +/- 0.005

[Thu Mar 29 03:53:23 2012] Off-axis axis estimate = 1.66'
[Thu Mar 29 05:16:08 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 05:16:08 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Mar 29 05:16:08 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Thu Mar 29 05:16:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Mar 29 08:06:07 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 29 08:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 29 08:06:07 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 29 08:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 29 08:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 08:06:08 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 29 08:06:08 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 29 08:06:08 2012] Fit fullrun_mos2_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 29 08:06:33 2012] Spatial fit model total counts = 102381.000000, observed total counts = 99279.000000
[Thu Mar 29 08:06:33 2012] Offset between fit and detection position for source 1 = 0.188137 pixels
[Thu Mar 29 08:06:33 2012] 102669.100000 total counts/ 25417.000000 bgd. counts: snr = 484.560657
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.188137 pixels
  Position = (303.0, 320.8) = 11 19 8.76 21 19 18.0
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 77252.1 +/- 320.4
  Background counts = 25417.0
  Rate = 1 +/- 0.004
[Thu Mar 29 08:06:33 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 08:06:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 08:06:33 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 08:06:33 2012] Source does appear to be extended
[Thu Mar 29 08:06:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 08:43:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 08:43:39 2012] Initial guess for spatial extent in simple fitting = 5.29"
[Thu Mar 29 08:43:39 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.020
[Thu Mar 29 08:43:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.29"
[Thu Mar 29 10:50:12 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 29 10:50:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 10:50:12 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 29 10:50:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554380101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 10:50:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554380101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554380101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 10:50:12 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 29 10:50:12 2012] fullrun_mos2_xmm0554380101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 29 10:50:12 2012] Fit fullrun_mos2_xmm0554380101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 29 10:50:28 2012] Spatial fit model total counts = 102422.000000, observed total counts = 99431.000000
[Thu Mar 29 10:50:28 2012] Offset between fit and detection position for source 1 = 0.012773 pixels
[Thu Mar 29 10:50:28 2012] 103174.000000 total counts/ 25591.600000 bgd. counts: snr = 484.969572
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012773 pixels
  Position = (303.0, 320.7) = 11 19 8.76 21 19 17.9
  Extent = 5.3 (5.3-5.3)", rotation angle = 0
  Source counts = 77582.4 +/- 321.2
  Background counts = 25591.6
  Rate = 1 +/- 0.004
[Thu Mar 29 10:50:28 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 10:50:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 10:50:28 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 10:50:28 2012] Source does appear to be extended
[Thu Mar 29 10:50:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 15:06:46 2012] Counts = 77582.400000, rescaling region sizes by 3.000000
[Thu Mar 29 15:06:46 2012] XMMSAS src. selection expression = ellipse(26310.393540, 27856.137200, 955.477827, 955.477827, 0.000000, X, Y)
[Thu Mar 29 15:06:46 2012] Writing source region out to fullrun_mos2_xmm0554380101_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar 29 15:06:46 2012] Extracting stamp from image fullrun_mos2_xmm0554380101_pi300-10000_cl_sm2.00.img.gz, (248, 266) - (358, 376)
[Thu Mar 29 15:06:46 2012] XMMSAS bgd. selection expression = annulus(26310.393540, 27856.137200, 4777.389137, 9554.778275, X, Y) && !ellipse(16956.657800, 23024.090000, 552.944016, 552.944016, 0.000000, X, Y) && !ellipse(19453.599533, 38153.521790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34265.528748, 35337.834015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22180.785889, 33507.321411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27260.329529, 27660.126495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21542.463745, 21765.151672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33717.583801, 29002.506653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33301.476990, 30769.157837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27566.151733, 28026.385132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36469.662384, 21799.422791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34434.693939, 21845.167618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30620.444336, 21799.887421, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 29 15:06:46 2012] Writing fullrun_mos2_xmm0554380101_pi300-10000_pass1_cl_src1.gif
[Thu Mar 29 15:07:14 2012] Mean detx,y = (13.55, -46.15) 
[Thu Mar 29 15:07:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 15:12:55 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 15:12:56 2012] Setting source spectrum file to fullrun_mos2_xmm0554380101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 29 15:12:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554380101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar 29 15:58:03 2012] Updating aperture counts using extracted products
[Thu Mar 29 15:58:03 2012] Error reading totcts from fullrun_mos2_xmm0554380101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 29 15:58:05 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 15:58:05 2012] Using photon index=1.80, rate=1.02, arf fullrun_mos2_xmm0554380101_pi300-10000_pass1_cl_src1.arf
[Thu Mar 29 15:58:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 15:58:05 2012] Updating source flux to 1e-11
[Thu Mar 29 16:00:48 2012] Reading fit data from xmm0554380101/analysis//spectral/fullrun_mos2_xmm0554380101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Mar 29 16:00:48 2012] Spectral fit parameter nH value = 1.18352e+13
[Thu Mar 29 16:00:48 2012] Spectral fit parameter PhoIndex value = 2.33366
[Thu Mar 29 16:00:48 2012] Failed to get F(0.3-8.0) from xmm0554380101/analysis//spectral/fullrun_mos2_xmm0554380101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Mar 29 16:00:48 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 16:00:48 2012] Using Nh = 1.2e+13, photon index=2.33, rate=1.02, arf fullrun_mos2_xmm0554380101_pi300-10000_pass1_cl_src1.arf
[Thu Mar 29 16:00:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 16:00:49 2012] Updating source flux to 8.4e-12