[Thu Mar 29 03:52:37 2012] Detection parameters:
  Position = (248.3, 251.0) = 11 19 25.78 21 14 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.3 +/- 19.6
  Background counts = 149.0
  Rate = 0.003 +/- 0.0004

[Thu Mar 29 03:52:37 2012] Off-axis axis estimate = 5.01'
[Thu Mar 29 04:39:57 2012] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 04:39:57 2012] Initial guess for spatial extent in simple fitting = 8.93"
[Thu Mar 29 04:39:57 2012] source mask rpix=2.1, npix_max = 26, mask sum = 28, frac = 1.074
[Thu Mar 29 04:39:57 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.93"
[Thu Mar 29 05:16:08 2012] fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_src8.ximg exists
[Thu Mar 29 05:16:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_src8.csv
[Thu Mar 29 05:16:08 2012] fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Mar 29 05:16:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_src8.csv
[Thu Mar 29 05:16:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 05:16:08 2012] fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Mar 29 05:16:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu Mar 29 05:16:08 2012] fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Mar 29 05:16:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu Mar 29 05:16:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 08:06:21 2012] Source 13 is offset by 5.791112 and 7.047827 pixels which is larger than
2 X fitted extent = 1.026717 x 1.026717, not incorporating fit results
[Thu Mar 29 08:06:21 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 08:06:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 08:06:21 2012] Assessing source extent using major
[Thu Mar 29 08:06:21 2012] Source does appear to be extended
[Thu Mar 29 08:06:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 08:06:21 2012] Deleting source due to low Poisson probability 0.9