[Thu Mar 29 03:52:36 2012] Detection parameters:
  Position = (303.2, 320.8) = 11 19 8.69 21 19 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121244.2 +/- 407.4
  Background counts = 202.7
  Rate = 2 +/- 0.005

[Thu Mar 29 03:52:37 2012] Off-axis axis estimate = 1.66'
[Thu Mar 29 04:39:57 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 04:39:57 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Mar 29 04:39:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Thu Mar 29 04:39:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Mar 29 05:16:08 2012] fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 29 05:16:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 29 05:16:08 2012] fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 29 05:16:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 29 05:16:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 05:16:08 2012] fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 29 05:16:08 2012] fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 29 05:16:08 2012] Fit fullrun_mos1_xmm0554380101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 29 08:06:21 2012] Spatial fit model total counts = 97501.900000, observed total counts = 97095.000000
[Thu Mar 29 08:06:21 2012] Offset between fit and detection position for source 1 = 0.210040 pixels
[Thu Mar 29 08:06:21 2012] 97379.600000 total counts/ 21205.800000 bgd. counts: snr = 523.092256
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.210040 pixels
  Position = (303.0, 320.7) = 11 19 8.74 21 19 17.7
  Extent = 5.2 (5.2-5.2)", rotation angle = 0
  Source counts = 76173.8 +/- 312.1
  Background counts = 21205.8
  Rate = 1 +/- 0.004
[Thu Mar 29 08:06:21 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 08:06:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 08:06:21 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 08:06:21 2012] Source does appear to be extended
[Thu Mar 29 08:06:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 08:28:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 08:28:14 2012] Initial guess for spatial extent in simple fitting = 5.18"
[Thu Mar 29 08:28:14 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.048
[Thu Mar 29 08:28:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.18"
[Thu Mar 29 08:43:39 2012] fullrun_mos1_xmm0554380101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 29 08:43:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554380101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 08:43:39 2012] fullrun_mos1_xmm0554380101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 29 08:43:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554380101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 08:43:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554380101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554380101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 08:43:39 2012] fullrun_mos1_xmm0554380101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 29 08:43:39 2012] fullrun_mos1_xmm0554380101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 29 08:43:39 2012] Fit fullrun_mos1_xmm0554380101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 29 10:50:20 2012] Spatial fit model total counts = 97856.900000, observed total counts = 97225.000000
[Thu Mar 29 10:50:20 2012] Offset between fit and detection position for source 1 = 0.007893 pixels
[Thu Mar 29 10:50:20 2012] 98023.100000 total counts/ 21595.000000 bgd. counts: snr = 520.087552
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.007893 pixels
  Position = (303.0, 320.7) = 11 19 8.74 21 19 17.7
  Extent = 5.2 (5.2-5.2)", rotation angle = 0
  Source counts = 76428.1 +/- 313.1
  Background counts = 21595.0
  Rate = 1 +/- 0.004
[Thu Mar 29 10:50:20 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 10:50:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 10:50:20 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 10:50:20 2012] Source does appear to be extended
[Thu Mar 29 10:50:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 14:27:07 2012] Counts = 76428.100000, rescaling region sizes by 3.000000
[Thu Mar 29 14:27:07 2012] XMMSAS src. selection expression = ellipse(26315.395240, 27850.846800, 936.151227, 936.151227, 0.000000, X, Y)
[Thu Mar 29 14:27:07 2012] Writing source region out to fullrun_mos1_xmm0554380101_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar 29 14:27:07 2012] Extracting stamp from image fullrun_mos1_xmm0554380101_pi300-10000_cl_sm2.00.img.gz, (249, 267) - (357, 374)
[Thu Mar 29 14:27:07 2012] XMMSAS bgd. selection expression = annulus(26315.395240, 27850.846800, 4680.756135, 9361.512269, X, Y) && !ellipse(34237.248135, 35333.664764, 584.929734, 321.504819, 244.351707, X, Y) && !ellipse(22191.621063, 33509.036560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16942.553802, 23014.550049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26913.295959, 28868.740967, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 29 14:27:07 2012] Writing fullrun_mos1_xmm0554380101_pi300-10000_pass1_cl_src1.gif
[Thu Mar 29 14:27:38 2012] Mean detx,y = (160.87, -169.76) 
[Thu Mar 29 14:27:43 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 14:31:29 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 14:31:29 2012] Setting source spectrum file to fullrun_mos1_xmm0554380101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 29 14:31:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554380101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar 29 15:58:02 2012] Updating aperture counts using extracted products
[Thu Mar 29 15:58:02 2012] Error reading totcts from fullrun_mos1_xmm0554380101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 29 15:58:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 15:58:03 2012] Using photon index=1.80, rate=1, arf fullrun_mos1_xmm0554380101_pi300-10000_pass1_cl_src1.arf
[Thu Mar 29 15:58:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 15:58:03 2012] Updating source flux to 9.1e-12
[Thu Mar 29 15:58:43 2012] Reading fit data from xmm0554380101/analysis//spectral/fullrun_mos1_xmm0554380101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Mar 29 15:58:43 2012] Spectral fit parameter nH value = 100475000000.0
[Thu Mar 29 15:58:43 2012] Spectral fit parameter PhoIndex value = 2.38961
[Thu Mar 29 15:58:43 2012] Failed to get F(0.3-8.0) from xmm0554380101/analysis//spectral/fullrun_mos1_xmm0554380101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Mar 29 15:58:43 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 15:58:43 2012] Using Nh = 1e+11, photon index=2.39, rate=1, arf fullrun_mos1_xmm0554380101_pi300-10000_pass1_cl_src1.arf
[Thu Mar 29 15:58:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 15:58:43 2012] Updating source flux to 7.4e-12