[Tue May 15 14:29:27 2012] Detection parameters:
  Position = (305.4, 319.2) = 14 13 15.00 -3 12 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 381429.9 +/- 697.8
  Background counts = 92.6
  Rate = 4 +/- 0.008

[Tue May 15 14:29:28 2012] Off-axis axis estimate = 1.59'
[Tue May 15 17:23:47 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Tue May 15 17:23:47 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Tue May 15 17:23:47 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.071
[Tue May 15 17:23:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.22"
[Tue May 15 18:35:43 2012] fullrun_mos2_xmm0554170201_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 15 18:35:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554170201_pi300-10000_cl_pass0_src1.csv
[Tue May 15 18:35:43 2012] fullrun_mos2_xmm0554170201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 15 18:35:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554170201_pi300-10000_cl_pass0_src1.csv
[Tue May 15 18:35:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554170201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554170201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 18:35:43 2012] fullrun_mos2_xmm0554170201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 15 18:35:43 2012] fullrun_mos2_xmm0554170201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 15 18:35:43 2012] Fit fullrun_mos2_xmm0554170201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 15 18:36:01 2012] Spatial fit model total counts = 334845.000000, observed total counts = 331970.000000
[Tue May 15 18:36:01 2012] Offset between fit and detection position for source 1 = 0.286394 pixels
[Tue May 15 18:36:01 2012] 311419.000000 total counts/ 25600.000000 bgd. counts: snr = 1786.368750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.286394 pixels
  Position = (305.2, 319.5) = 14 13 15.05 -3 12 28.2
  Extent = 6.2 (6.2-6.3)", rotation angle = 0
  Source counts = 285819.0 +/- 558.0
  Background counts = 25600.0
  Rate = 3 +/- 0.006
[Tue May 15 18:36:01 2012] Vigneting correction estimate = 1.000000
[Tue May 15 18:36:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 18:36:01 2012] Assessing source extent using major axis lower bound
[Tue May 15 18:36:01 2012] Source does appear to be extended
[Tue May 15 18:36:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 20:13:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 20:13:57 2012] Initial guess for spatial extent in simple fitting = 6.24"
[Tue May 15 20:13:57 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.801
[Tue May 15 20:13:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.24"
[Tue May 15 20:49:03 2012] fullrun_mos2_xmm0554170201_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 15 20:49:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554170201_pi300-10000_cl_pass1_src1.csv
[Tue May 15 20:49:03 2012] fullrun_mos2_xmm0554170201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 15 20:49:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554170201_pi300-10000_cl_pass1_src1.csv
[Tue May 15 20:49:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554170201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554170201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 20:49:04 2012] fullrun_mos2_xmm0554170201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 15 20:49:04 2012] fullrun_mos2_xmm0554170201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 15 20:49:04 2012] Fit fullrun_mos2_xmm0554170201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 15 20:49:16 2012] Spatial fit model total counts = 334832.000000, observed total counts = 331970.000000
[Tue May 15 20:49:16 2012] Offset between fit and detection position for source 1 = 0.000138 pixels
[Tue May 15 20:49:16 2012] 311404.000000 total counts/ 25600.000000 bgd. counts: snr = 1786.275000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000138 pixels
  Position = (305.2, 319.5) = 14 13 15.05 -3 12 28.2
  Extent = 6.2 (6.2-6.3)", rotation angle = 0
  Source counts = 285804.0 +/- 558.0
  Background counts = 25600.0
  Rate = 3 +/- 0.006
[Tue May 15 20:49:16 2012] Vigneting correction estimate = 1.000000
[Tue May 15 20:49:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 20:49:16 2012] Assessing source extent using major axis lower bound
[Tue May 15 20:49:16 2012] Source does appear to be extended
[Tue May 15 20:49:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 22:54:46 2012] Counts = 285804.000000, rescaling region sizes by 3.000000
[Tue May 15 22:54:46 2012] XMMSAS src. selection expression = ellipse(26503.897660, 27745.630000, 1123.943432, 1123.943432, 0.000000, X, Y)
[Tue May 15 22:54:46 2012] Writing source region out to fullrun_mos2_xmm0554170201_pi300-10000_pass1_cl_src1_src.reg
[Tue May 15 22:54:46 2012] Extracting stamp from image fullrun_mos2_xmm0554170201_pi300-10000_cl_sm2.00.img.gz, (241, 255) - (370, 384)
[Tue May 15 22:54:46 2012] XMMSAS bgd. selection expression = annulus(26503.897660, 27745.630000, 5619.717162, 11239.434323, X, Y) && !ellipse(34099.103546, 33882.654938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27551.737579, 27845.837830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35783.196594, 26223.622894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17028.821014, 16314.290237, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 15 22:54:46 2012] Writing fullrun_mos2_xmm0554170201_pi300-10000_pass1_cl_src1.gif
[Tue May 15 22:55:34 2012] Mean detx,y = (49.49, -89.03) 
[Tue May 15 22:55:41 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 23:00:24 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 23:00:25 2012] Setting source spectrum file to fullrun_mos2_xmm0554170201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 15 23:00:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554170201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 15 23:17:36 2012] Updating aperture counts using extracted products
[Tue May 15 23:17:36 2012] Error reading totcts from fullrun_mos2_xmm0554170201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 15 23:17:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 23:17:36 2012] Using photon index=1.80, rate=3.25, arf fullrun_mos2_xmm0554170201_pi300-10000_pass1_cl_src1.arf
[Tue May 15 23:17:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 23:17:36 2012] Updating source flux to 3.2e-11
[Tue May 15 23:20:03 2012] Reading fit data from xmm0554170201/analysis//spectral/fullrun_mos2_xmm0554170201_pi300-10000_pass1_cl_src1_pl.csv
[Tue May 15 23:20:03 2012] Spectral fit parameter nH value = 2.52866e+22
[Tue May 15 23:20:03 2012] Spectral fit parameter PhoIndex value = 1.58632
[Tue May 15 23:20:03 2012] Failed to get F(0.3-8.0) from xmm0554170201/analysis//spectral/fullrun_mos2_xmm0554170201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue May 15 23:20:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 23:20:03 2012] Using Nh = 2.5e+22, photon index=1.59, rate=3.25, arf fullrun_mos2_xmm0554170201_pi300-10000_pass1_cl_src1.arf
[Tue May 15 23:20:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 23:20:03 2012] Updating source flux to 7.6e-11