[Tue May 15 14:29:00 2012] Detection parameters:
  Position = (392.4, 390.0) = 14 12 49.72 -3 7 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2038.6 +/- 56.1
  Background counts = 73.3
  Rate = 0.04 +/- 0.001

[Tue May 15 14:29:01 2012] Off-axis axis estimate = 9.51'
[Tue May 15 15:48:21 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Tue May 15 15:48:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 15 15:48:21 2012] Initial guess for spatial extent in simple fitting = 11.19"
[Tue May 15 15:48:21 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954
[Tue May 15 15:48:21 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.19"
[Tue May 15 17:23:47 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src2.ximg exists
[Tue May 15 17:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src2.csv
[Tue May 15 17:23:47 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue May 15 17:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src2.csv
[Tue May 15 17:23:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 17:23:47 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue May 15 17:23:47 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue May 15 17:23:47 2012] Fit fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue May 15 18:35:54 2012] Spatial fit model total counts = 2383.020000, observed total counts = 2374.000000
[Tue May 15 18:35:54 2012] Offset between fit and detection position for source 3 = 0.217747 pixels
[Tue May 15 18:35:54 2012] 2377.959000 total counts/ 964.169000 bgd. counts: snr = 45.531119
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.217747 pixels
  Position = (392.2, 390.0) = 14 12 49.79 -3 7 21.2
  Extent = 5.7 (5.4-6.0)", rotation angle = 0
  Source counts = 1413.8 +/- 48.8
  Background counts = 964.2
  Rate = 0.02 +/- 0.0006
[Tue May 15 18:35:54 2012] Vigneting correction estimate = 1.000000
[Tue May 15 18:35:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 18:35:54 2012] Assessing source extent using major axis lower bound
[Tue May 15 18:35:54 2012] Source does appear to be extended
[Tue May 15 18:35:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 19:14:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 19:14:12 2012] Initial guess for spatial extent in simple fitting = 5.69"
[Tue May 15 19:14:12 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.224
[Tue May 15 19:14:12 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.69"
[Tue May 15 20:13:57 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src2.ximg exists
[Tue May 15 20:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src2.csv
[Tue May 15 20:13:57 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue May 15 20:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src2.csv
[Tue May 15 20:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 20:13:57 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue May 15 20:13:57 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue May 15 20:13:57 2012] Fit fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue May 15 20:49:11 2012] Spatial fit model total counts = 2383.630000, observed total counts = 2374.000000
[Tue May 15 20:49:11 2012] Offset between fit and detection position for source 3 = 0.001264 pixels
[Tue May 15 20:49:11 2012] 2378.597000 total counts/ 962.157000 bgd. counts: snr = 45.664132
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.001264 pixels
  Position = (392.2, 390.0) = 14 12 49.79 -3 7 21.2
  Extent = 5.7 (5.4-6.0)", rotation angle = 0
  Source counts = 1416.4 +/- 48.8
  Background counts = 962.2
  Rate = 0.02 +/- 0.0006
[Tue May 15 20:49:11 2012] Vigneting correction estimate = 1.000000
[Tue May 15 20:49:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 20:49:11 2012] Assessing source extent using major axis lower bound
[Tue May 15 20:49:11 2012] Source does appear to be extended
[Tue May 15 20:49:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 22:07:59 2012] Counts = 1416.440000, rescaling region sizes by 2.000000
[Tue May 15 22:07:59 2012] XMMSAS src. selection expression = ellipse(34070.804360, 33884.546400, 684.343220, 684.343220, 0.000000, X, Y)
[Tue May 15 22:07:59 2012] Writing source region out to fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src3_src.reg
[Tue May 15 22:07:59 2012] Extracting stamp from image fullrun_mos1_xmm0554170201_pi300-10000_cl_sm2.00.img.gz, (353, 351) - (432, 429)
[Tue May 15 22:07:59 2012] XMMSAS bgd. selection expression = annulus(34070.804360, 33884.546400, 2281.144066, 4562.288131, X, Y)
[Tue May 15 22:07:59 2012] Writing fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src3.gif
[Tue May 15 22:13:21 2012] Mean detx,y = (3430.97, 8955.44) 
[Tue May 15 22:13:24 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 22:14:59 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 22:14:59 2012] Setting source spectrum file to fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 15 22:14:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue May 15 23:17:35 2012] Updating aperture counts using extracted products
[Tue May 15 23:17:35 2012] Error reading totcts from fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 15 23:17:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 23:17:35 2012] Using photon index=1.80, rate=0.0166, arf fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src3.arf
[Tue May 15 23:17:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 23:17:35 2012] Updating source flux to 2.4e-13