[Tue May 15 14:29:01 2012] Detection parameters:
  Position = (228.7, 151.7) = 14 13 37.27 -3 24 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 377.0 +/- 26.1
  Background counts = 51.2
  Rate = 0.004 +/- 0.0003

[Tue May 15 14:29:01 2012] Off-axis axis estimate = 11.78'
[Tue May 15 15:48:21 2012] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Tue May 15 15:48:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 15 15:48:21 2012] Initial guess for spatial extent in simple fitting = 12.32"
[Tue May 15 15:48:21 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.104
[Tue May 15 15:48:21 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.32"
[Tue May 15 17:23:47 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src5.ximg exists
[Tue May 15 17:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src5.csv
[Tue May 15 17:23:47 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue May 15 17:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src5.csv
[Tue May 15 17:23:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 17:23:47 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue May 15 17:23:47 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue May 15 17:23:47 2012] Fit fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue May 15 18:35:54 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 15.321937 pixels away
[Tue May 15 18:35:54 2012] Vigneting correction estimate = 1.000000
[Tue May 15 18:35:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 18:35:54 2012] Assessing source extent using major
[Tue May 15 18:35:54 2012] Source does appear to be extended
[Tue May 15 18:35:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 19:14:12 2012] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Tue May 15 19:14:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 15 19:14:12 2012] Initial guess for spatial extent in simple fitting = 12.32"
[Tue May 15 19:14:12 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.104
[Tue May 15 19:14:12 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.32"
[Tue May 15 20:13:57 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src5.ximg exists
[Tue May 15 20:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src5.csv
[Tue May 15 20:13:57 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue May 15 20:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src5.csv
[Tue May 15 20:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 20:13:57 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue May 15 20:13:57 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue May 15 20:13:57 2012] Fit fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue May 15 20:49:11 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 15.321937 pixels away
[Tue May 15 20:49:11 2012] Source 26 is offset by 3.903509 and -1.986236 pixels which is larger than
2 X fitted extent = 1.411559 x 1.411559, not incorporating fit results
[Tue May 15 20:49:11 2012] Vigneting correction estimate = 1.000000
[Tue May 15 20:49:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 20:49:11 2012] Assessing source extent using major
[Tue May 15 20:49:11 2012] Source does appear to be extended
[Tue May 15 20:49:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 22:07:59 2012] XMMSAS src. selection expression = ellipse(19848.049271, 13149.617447, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 15 22:07:59 2012] Writing source region out to fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src26_src.reg
[Tue May 15 22:07:59 2012] Extracting stamp from image fullrun_mos1_xmm0554170201_pi300-10000_cl_sm2.00.img.gz, (191, 114) - (266, 189)
[Tue May 15 22:07:59 2012] XMMSAS bgd. selection expression = annulus(19848.049271, 13149.617447, 1087.500000, 2175.000000, X, Y) && !ellipse(18527.897018, 13970.665344, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 15 22:07:59 2012] Writing fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src26.gif
[Tue May 15 22:17:46 2012] Mean detx,y = (-11444.07, -11303.21) 
[Tue May 15 22:17:48 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 22:18:27 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 22:18:27 2012] Setting source spectrum file to fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue May 15 22:18:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue May 15 22:54:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 15 22:54:07 2012] rmf not generated due to insufficient counts
[Tue May 15 23:17:35 2012] Updating aperture counts using extracted products
[Tue May 15 23:17:35 2012] Error reading totcts from fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue May 15 23:17:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 23:17:35 2012] Using photon index=1.80, rate=0.00431, arf fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src26.arf
[Tue May 15 23:17:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 23:17:35 2012] Updating source flux to 1.3e-13
[Tue May 15 23:17:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting