[Tue May 15 14:29:01 2012] Detection parameters:
  Position = (301.6, 328.0) = 14 13 16.09 -3 11 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 648.5 +/- 53.6
  Background counts = 105.9
  Rate = 0.009 +/- 0.0008

[Tue May 15 14:29:01 2012] Off-axis axis estimate = 2.16'
[Tue May 15 15:48:21 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Tue May 15 15:48:21 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Tue May 15 15:48:21 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.807
[Tue May 15 15:48:21 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.51"
[Tue May 15 17:23:47 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src3.ximg exists
[Tue May 15 17:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src3.csv
[Tue May 15 17:23:47 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue May 15 17:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src3.csv
[Tue May 15 17:23:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 17:23:47 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue May 15 17:23:47 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue May 15 17:23:47 2012] Fit fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue May 15 18:35:54 2012] Source 17 is offset by -3.671020 and 5.916996 pixels which is larger than
2 X fitted extent = 3.068947 x 3.068947, not incorporating fit results
[Tue May 15 18:35:54 2012] Vigneting correction estimate = 1.000000
[Tue May 15 18:35:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 18:35:54 2012] Assessing source extent using major
[Tue May 15 18:35:54 2012] Source does appear to be extended
[Tue May 15 18:35:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 19:14:12 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Tue May 15 19:14:12 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Tue May 15 19:14:12 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.807
[Tue May 15 19:14:12 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.51"
[Tue May 15 20:13:57 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src3.ximg exists
[Tue May 15 20:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src3.csv
[Tue May 15 20:13:57 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue May 15 20:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src3.csv
[Tue May 15 20:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 20:13:57 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue May 15 20:13:57 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue May 15 20:13:57 2012] Fit fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue May 15 20:49:11 2012] Source 17 is offset by -3.674399 and 5.916996 pixels which is larger than
2 X fitted extent = 3.074023 x 3.074023, not incorporating fit results
[Tue May 15 20:49:11 2012] Vigneting correction estimate = 1.000000
[Tue May 15 20:49:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 20:49:11 2012] Assessing source extent using major
[Tue May 15 20:49:11 2012] Source does appear to be extended
[Tue May 15 20:49:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 22:07:59 2012] XMMSAS src. selection expression = ellipse(26191.595276, 28488.726624, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 15 22:07:59 2012] Writing source region out to fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src17_src.reg
[Tue May 15 22:07:59 2012] Extracting stamp from image fullrun_mos1_xmm0554170201_pi300-10000_cl_sm2.00.img.gz, (264, 291) - (339, 366)
[Tue May 15 22:07:59 2012] XMMSAS bgd. selection expression = annulus(26191.595276, 28488.726624, 1087.500000, 2175.000000, X, Y) && !ellipse(26506.515200, 27738.392200, 1367.793639, 1367.793639, 0.000000, X, Y) && !ellipse(27189.217224, 28767.794098, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 15 22:07:59 2012] Writing fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src17.gif
[Tue May 15 22:16:22 2012] Mean detx,y = (506.54, -229.44) 
[Tue May 15 22:16:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 22:16:54 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 22:16:55 2012] Setting source spectrum file to fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue May 15 22:16:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue May 15 22:52:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 15 22:52:31 2012] rmf not generated due to insufficient counts
[Tue May 15 23:17:35 2012] Updating aperture counts using extracted products
[Tue May 15 23:17:35 2012] Error reading totcts from fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue May 15 23:17:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 23:17:35 2012] Using photon index=1.80, rate=0.00939, arf fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src17.arf
[Tue May 15 23:17:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 23:17:35 2012] Updating source flux to 1e-13
[Tue May 15 23:17:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting