[Tue May 15 14:29:00 2012] Detection parameters:
  Position = (305.4, 319.5) = 14 13 14.98 -3 12 28.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 356021.8 +/- 690.0
  Background counts = 104.0
  Rate = 4 +/- 0.009

[Tue May 15 14:29:01 2012] Off-axis axis estimate = 1.61'
[Tue May 15 15:48:21 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Tue May 15 15:48:21 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Tue May 15 15:48:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 21, frac = 1.122
[Tue May 15 15:48:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.23"
[Tue May 15 17:23:47 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 15 17:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src1.csv
[Tue May 15 17:23:47 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 15 17:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src1.csv
[Tue May 15 17:23:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 17:23:47 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 15 17:23:47 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 15 17:23:47 2012] Fit fullrun_mos1_xmm0554170201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 15 18:35:54 2012] Spatial fit model total counts = 288658.000000, observed total counts = 302785.000000
[Tue May 15 18:35:54 2012] Offset between fit and detection position for source 1 = 0.222546 pixels
[Tue May 15 18:35:54 2012] 287433.000000 total counts/ 25600.000000 bgd. counts: snr = 1636.456250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.222546 pixels
  Position = (305.2, 319.4) = 14 13 15.04 -3 12 28.6
  Extent = 5.8 (5.8-5.8)", rotation angle = 0
  Source counts = 261833.0 +/- 536.1
  Background counts = 25600.0
  Rate = 3 +/- 0.006
[Tue May 15 18:35:54 2012] Vigneting correction estimate = 1.000000
[Tue May 15 18:35:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 18:35:54 2012] Assessing source extent using major axis lower bound
[Tue May 15 18:35:54 2012] Source does appear to be extended
[Tue May 15 18:35:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 19:14:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 19:14:12 2012] Initial guess for spatial extent in simple fitting = 5.80"
[Tue May 15 19:14:12 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.892
[Tue May 15 19:14:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.80"
[Tue May 15 20:13:57 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 15 20:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src1.csv
[Tue May 15 20:13:57 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 15 20:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src1.csv
[Tue May 15 20:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 20:13:57 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 15 20:13:57 2012] fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 15 20:13:57 2012] Fit fullrun_mos1_xmm0554170201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 15 20:49:11 2012] Spatial fit model total counts = 286662.000000, observed total counts = 302785.000000
[Tue May 15 20:49:11 2012] Offset between fit and detection position for source 1 = 0.008854 pixels
[Tue May 15 20:49:11 2012] 285428.000000 total counts/ 25600.000000 bgd. counts: snr = 1623.925000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008854 pixels
  Position = (305.2, 319.4) = 14 13 15.04 -3 12 28.6
  Extent = 5.7 (5.7-5.7)", rotation angle = 0
  Source counts = 259828.0 +/- 534.3
  Background counts = 25600.0
  Rate = 3 +/- 0.006
[Tue May 15 20:49:11 2012] Vigneting correction estimate = 1.000000
[Tue May 15 20:49:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 20:49:11 2012] Assessing source extent using major axis lower bound
[Tue May 15 20:49:11 2012] Source does appear to be extended
[Tue May 15 20:49:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 22:07:59 2012] Counts = 259828.000000, rescaling region sizes by 3.000000
[Tue May 15 22:07:59 2012] XMMSAS src. selection expression = ellipse(26506.515200, 27738.392200, 1025.845230, 1025.845230, 0.000000, X, Y)
[Tue May 15 22:07:59 2012] Writing source region out to fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src1_src.reg
[Tue May 15 22:07:59 2012] Extracting stamp from image fullrun_mos1_xmm0554170201_pi300-10000_cl_sm2.00.img.gz, (246, 260) - (364, 378)
[Tue May 15 22:07:59 2012] XMMSAS bgd. selection expression = annulus(26506.515200, 27738.392200, 5129.226148, 10258.452295, X, Y) && !ellipse(34070.804360, 33884.546400, 456.228813, 456.228813, 0.000000, X, Y) && !ellipse(27189.217224, 28767.794098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26191.595276, 28488.726624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35791.918365, 26195.256561, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 15 22:07:59 2012] Writing fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src1.gif
[Tue May 15 22:08:32 2012] Mean detx,y = (117.63, -204.04) 
[Tue May 15 22:08:39 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 22:13:02 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 22:13:02 2012] Setting source spectrum file to fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 15 22:13:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 15 23:17:35 2012] Updating aperture counts using extracted products
[Tue May 15 23:17:35 2012] Error reading totcts from fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 15 23:17:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 23:17:35 2012] Using photon index=1.80, rate=3.05, arf fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src1.arf
[Tue May 15 23:17:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 23:17:35 2012] Updating source flux to 2.9e-11
[Tue May 15 23:19:05 2012] Reading fit data from xmm0554170201/analysis//spectral/fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src1_pl.csv
[Tue May 15 23:19:05 2012] Spectral fit parameter nH value = 2.5278e+22
[Tue May 15 23:19:05 2012] Spectral fit parameter PhoIndex value = 1.55145
[Tue May 15 23:19:05 2012] Failed to get F(0.3-8.0) from xmm0554170201/analysis//spectral/fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue May 15 23:19:05 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 23:19:05 2012] Using Nh = 2.5e+22, photon index=1.55, rate=3.05, arf fullrun_mos1_xmm0554170201_pi300-10000_pass1_cl_src1.arf
[Tue May 15 23:19:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 23:19:05 2012] Updating source flux to 6.7e-11