[Mon May 28 20:50:00 2012] Detection parameters: Position = (282.5, 297.8) = 14 13 17.72 -3 10 48.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 795.8 +/- 62.9 Background counts = 1071.3 Rate = 0.01 +/- 0.001 [Mon May 28 20:50:00 2012] Off-axis axis estimate = 1.16' [Mon May 28 21:08:38 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting [Mon May 28 21:08:38 2012] Initial guess for spatial extent in simple fitting = 7.01" [Mon May 28 21:08:38 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.122 [Mon May 28 21:08:38 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.01" [Mon May 28 21:49:44 2012] fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_src3.ximg exists [Mon May 28 21:49:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_src3.csv [Mon May 28 21:49:44 2012] fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_src3_1.ximg exists [Mon May 28 21:49:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_src3.csv [Mon May 28 21:49:44 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 28 21:49:44 2012] fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Mon May 28 21:49:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src3.csv [Mon May 28 21:49:44 2012] fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Mon May 28 21:49:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src3.csv [Mon May 28 21:49:44 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 28 22:27:28 2012] Source 3 is offset by -0.214413 and 5.286203 pixels which is larger than 2 X fitted extent = 1.400699 x 1.400699, not incorporating fit results [Mon May 28 22:27:28 2012] Vigneting correction estimate = 1.000000 [Mon May 28 22:27:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 28 22:27:28 2012] Assessing source extent using major [Mon May 28 22:27:28 2012] Source does appear to be extended [Mon May 28 22:27:28 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 28 22:27:38 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting [Mon May 28 22:27:38 2012] Initial guess for spatial extent in simple fitting = 7.01" [Mon May 28 22:27:38 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.122 [Mon May 28 22:27:38 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.01" [Mon May 28 22:36:50 2012] fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_src3.ximg exists [Mon May 28 22:36:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_src3.csv [Mon May 28 22:36:50 2012] fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_src3_1.ximg exists [Mon May 28 22:36:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_src3.csv [Mon May 28 22:36:50 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 28 22:36:50 2012] fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Mon May 28 22:36:50 2012] fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Mon May 28 22:36:50 2012] Fit fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly [Mon May 28 22:56:36 2012] Spatial fit model total counts = 17956.200000, observed total counts = 17952.000000 [Mon May 28 22:56:36 2012] Offset between fit and detection position for source 3 = 5.926175 pixels [Mon May 28 22:56:36 2012] 18016.040000 total counts/ 15367.000000 bgd. counts: snr = 21.369481 Spatial fit parameters: Offset between fit and detection position for source 3 = 5.926175 pixels Position = (285.1, 292.6) = 14 13 16.94 -3 11 18.4 Extent = 14.0 (14.0-28.0)", rotation angle = 0 Source counts = 2649.0 +/- 134.2 Background counts = 15367.0 Rate = 0.03 +/- 0.002 [Mon May 28 22:56:36 2012] Vigneting correction estimate = 1.000000 [Mon May 28 22:56:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 28 22:56:36 2012] Assessing source extent using major axis lower bound [Mon May 28 22:56:36 2012] Source does appear to be extended [Mon May 28 22:56:36 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 28 22:56:43 2012] Counts = 2649.040000, rescaling region sizes by 2.000000 [Mon May 28 22:56:43 2012] XMMSAS src. selection expression = ellipse(24758.330000, 25403.842000, 1681.980048, 1681.980048, 0.000000, X, Y) [Mon May 28 22:56:43 2012] Writing source region out to fullrun_pn_xmm0554170101_pi300-10000_pass1_cl_src3_src.reg [Mon May 28 22:56:43 2012] Extracting stamp from image fullrun_pn_xmm0554170101_pi300-10000_cl_sm2.00.img.gz, (188, 196) - (382, 389) [Mon May 28 22:56:43 2012] XMMSAS bgd. selection expression = annulus(24758.330000, 25403.842000, 5606.600161, 11213.200323, X, Y) && !ellipse(23889.522919, 27439.076721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24156.865784, 26830.976776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25358.987160, 24020.338200, 1748.469650, 1719.866449, 337.812897, X, Y) [Mon May 28 22:56:43 2012] Writing fullrun_pn_xmm0554170101_pi300-10000_pass1_cl_src3.gif [Mon May 28 23:21:35 2012] Mean detx,y = (204.97, 151.43) [Mon May 28 23:21:47 2012] Setting backscal keywords in source and bgd. spectrum [Mon May 28 23:22:57 2012] Binned source spectrum to 10 counts/bin [Mon May 28 23:22:57 2012] Setting source spectrum file to fullrun_pn_xmm0554170101_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Mon May 28 23:22:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554170101_pi300-10000_pass1_cl_src3_bgd.pi.gz [Tue May 29 00:26:35 2012] Updating aperture counts using extracted products [Tue May 29 00:26:35 2012] Error reading totcts from fullrun_pn_xmm0554170101_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Tue May 29 00:26:35 2012] Calculating source flux in energy range 0.30-8.00 [Tue May 29 00:26:35 2012] Using photon index=1.80, rate=0.0304, arf fullrun_pn_xmm0554170101_pi300-10000_pass1_cl_src3.arf [Tue May 29 00:26:35 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 29 00:26:35 2012] Updating source flux to 6.6e-14 [Tue May 29 00:27:44 2012] Flag b found in src. 3 procflags, skipping spectral fitting [Tue May 29 00:28:16 2012] Reading fit data from xmm0554170101/analysis//spectral/fullrun_pn_xmm0554170101_pi300-10000_pass1_cl_src3_pl.csv [Tue May 29 00:28:16 2012] Spectral fit parameter nH value = 2.4772e+22 [Tue May 29 00:28:16 2012] Spectral fit parameter PhoIndex value = 1.56224 [Tue May 29 00:28:16 2012] Failed to get F(0.3-8.0) from xmm0554170101/analysis//spectral/fullrun_pn_xmm0554170101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected [Tue May 29 00:28:16 2012] Calculating source flux in energy range 0.30-8.00 [Tue May 29 00:28:16 2012] Using Nh = 2.5e+22, photon index=1.56, rate=0.0304, arf fullrun_pn_xmm0554170101_pi300-10000_pass1_cl_src3.arf [Tue May 29 00:28:16 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 29 00:28:16 2012] Updating source flux to 2.1e-13