[Mon May 28 20:50:00 2012] Detection parameters:
  Position = (278.2, 309.0) = 14 13 18.95 -3 10 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 837.2 +/- 59.9
  Background counts = 1042.9
  Rate = 0.01 +/- 0.001

[Mon May 28 20:50:00 2012] Off-axis axis estimate = 1.65'
[Mon May 28 21:08:38 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon May 28 21:08:38 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Mon May 28 21:08:38 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Mon May 28 21:08:38 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.25"
[Mon May 28 21:49:44 2012] fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_src2.ximg exists
[Mon May 28 21:49:44 2012] fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon May 28 21:49:44 2012] Fit fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_src2 appears to have run properly
[Mon May 28 21:49:44 2012] fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon May 28 21:49:44 2012] fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon May 28 21:49:44 2012] Fit fullrun_pn_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon May 28 22:27:28 2012] Source 2 is offset by 1.274329 and -2.534821 pixels which is larger than
2 X fitted extent = 6.670943 x 2.115692, not incorporating fit results
[Mon May 28 22:27:28 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:27:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:27:28 2012] Assessing source extent using major
[Mon May 28 22:27:28 2012] Source does appear to be extended
[Mon May 28 22:27:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:27:38 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon May 28 22:27:38 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Mon May 28 22:27:38 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Mon May 28 22:27:38 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.25"
[Mon May 28 22:36:50 2012] fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_src2.ximg exists
[Mon May 28 22:36:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_src2.csv
[Mon May 28 22:36:50 2012] fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon May 28 22:36:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_src2.csv
[Mon May 28 22:36:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 22:36:50 2012] fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon May 28 22:36:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon May 28 22:36:50 2012] fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon May 28 22:36:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon May 28 22:36:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554170101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 22:56:36 2012] Spatial fit model total counts = 2496.330000, observed total counts = 12990.000000
[Mon May 28 22:56:36 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 28 22:56:36 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:56:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:56:36 2012] Assessing source extent using major
[Mon May 28 22:56:36 2012] Source does appear to be extended
[Mon May 28 22:56:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:56:43 2012] XMMSAS src. selection expression = ellipse(24156.865784, 26830.976776, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 22:56:43 2012] Writing source region out to fullrun_pn_xmm0554170101_pi300-10000_pass1_cl_src2_src.reg
[Mon May 28 22:56:43 2012] Extracting stamp from image fullrun_pn_xmm0554170101_pi300-10000_cl_sm2.00.img.gz, (241, 271) - (316, 346)
[Mon May 28 22:56:43 2012] XMMSAS bgd. selection expression = annulus(24156.865784, 26830.976776, 1087.500000, 2175.000000, X, Y) && !ellipse(23889.522919, 27439.076721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24758.330000, 25403.842000, 1121.320032, 1121.320032, 0.000000, X, Y) && !ellipse(25358.987160, 24020.338200, 1748.469650, 1719.866449, 337.812897, X, Y)
[Mon May 28 22:56:43 2012] Writing fullrun_pn_xmm0554170101_pi300-10000_pass1_cl_src2.gif
[Mon May 28 23:15:36 2012] Mean detx,y = (210.16, 2987.65) 
[Mon May 28 23:15:55 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 23:16:13 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 23:16:13 2012] Setting source spectrum file to fullrun_pn_xmm0554170101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 28 23:16:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554170101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May 28 23:30:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 23:30:14 2012] rmf not generated due to insufficient counts
[Tue May 29 00:26:35 2012] Updating aperture counts using extracted products
[Tue May 29 00:26:35 2012] Error reading totcts from fullrun_pn_xmm0554170101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue May 29 00:26:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 00:26:35 2012] Using photon index=1.80, rate=0.0145, arf fullrun_pn_xmm0554170101_pi300-10000_pass1_cl_src2.arf
[Tue May 29 00:26:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 00:26:35 2012] Updating source flux to 4.2e-14
[Tue May 29 00:27:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 29 00:28:16 2012] xmm0554170101/analysis//spectral/fullrun_pn_xmm0554170101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete