[Mon May 28 20:50:29 2012] Detection parameters:
  Position = (292.0, 276.8) = 14 13 14.96 -3 12 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 408092.4 +/- 789.7
  Background counts = 224.4
  Rate = 5 +/- 0.009

[Mon May 28 20:50:30 2012] Off-axis axis estimate = 1.63'
[Mon May 28 22:06:25 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon May 28 22:06:25 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Mon May 28 22:06:25 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Mon May 28 22:06:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Mon May 28 22:27:26 2012] fullrun_mos2_xmm0554170101_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 28 22:27:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554170101_pi300-10000_cl_pass0_src1.csv
[Mon May 28 22:27:26 2012] fullrun_mos2_xmm0554170101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 28 22:27:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554170101_pi300-10000_cl_pass0_src1.csv
[Mon May 28 22:27:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554170101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554170101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 22:27:27 2012] fullrun_mos2_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 28 22:27:27 2012] fullrun_mos2_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 28 22:27:27 2012] Fit fullrun_mos2_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 28 22:27:33 2012] Spatial fit model total counts = 289932.000000, observed total counts = 308178.000000
[Mon May 28 22:27:33 2012] Offset between fit and detection position for source 1 = 0.118482 pixels
[Mon May 28 22:27:33 2012] 290521.000000 total counts/ 25600.000000 bgd. counts: snr = 1655.756250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.118482 pixels
  Position = (292.0, 276.8) = 14 13 14.94 -3 12 27.1
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 264921.0 +/- 539.0
  Background counts = 25600.0
  Rate = 3 +/- 0.007
[Mon May 28 22:27:33 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:27:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:27:33 2012] Assessing source extent using major axis lower bound
[Mon May 28 22:27:33 2012] Source does appear to be extended
[Mon May 28 22:27:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:46:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 22:46:50 2012] Initial guess for spatial extent in simple fitting = 6.19"
[Mon May 28 22:46:50 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.082
[Mon May 28 22:46:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.19"
[Mon May 28 22:56:35 2012] fullrun_mos2_xmm0554170101_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 22:56:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554170101_pi300-10000_cl_pass1_src1.csv
[Mon May 28 22:56:35 2012] fullrun_mos2_xmm0554170101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 22:56:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554170101_pi300-10000_cl_pass1_src1.csv
[Mon May 28 22:56:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554170101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554170101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 22:56:35 2012] fullrun_mos2_xmm0554170101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 22:56:35 2012] fullrun_mos2_xmm0554170101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 22:56:35 2012] Fit fullrun_mos2_xmm0554170101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 28 22:56:39 2012] Spatial fit model total counts = 290003.000000, observed total counts = 308178.000000
[Mon May 28 22:56:39 2012] Offset between fit and detection position for source 1 = 0.000287 pixels
[Mon May 28 22:56:39 2012] 290596.000000 total counts/ 25600.000000 bgd. counts: snr = 1656.225000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000287 pixels
  Position = (292.0, 276.8) = 14 13 14.94 -3 12 27.1
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 264996.0 +/- 539.1
  Background counts = 25600.0
  Rate = 3 +/- 0.007
[Mon May 28 22:56:39 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:56:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:56:39 2012] Assessing source extent using major axis lower bound
[Mon May 28 22:56:39 2012] Source does appear to be extended
[Mon May 28 22:56:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 00:10:53 2012] Counts = 264996.000000, rescaling region sizes by 3.000000
[Tue May 29 00:10:53 2012] XMMSAS src. selection expression = ellipse(25359.730680, 24029.506800, 1114.385432, 1114.385432, 0.000000, X, Y)
[Tue May 29 00:10:53 2012] Writing source region out to fullrun_mos2_xmm0554170101_pi300-10000_pass1_cl_src1_src.reg
[Tue May 29 00:10:53 2012] Extracting stamp from image fullrun_mos2_xmm0554170101_pi300-10000_cl_sm2.00.img.gz, (228, 213) - (356, 341)
[Tue May 29 00:10:53 2012] XMMSAS bgd. selection expression = annulus(25359.730680, 24029.506800, 5571.927160, 11143.854321, X, Y) && !ellipse(32940.663818, 30163.187225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24388.848969, 23882.468506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24605.727692, 23525.730804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29166.000702, 33395.037567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17975.746506, 31440.258972, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 00:10:53 2012] Writing fullrun_mos2_xmm0554170101_pi300-10000_pass1_cl_src1.gif
[Tue May 29 00:11:14 2012] Mean detx,y = (-39.23, -100.83) 
[Tue May 29 00:11:16 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 00:13:23 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 00:13:23 2012] Setting source spectrum file to fullrun_mos2_xmm0554170101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 29 00:13:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554170101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 29 00:26:35 2012] Updating aperture counts using extracted products
[Tue May 29 00:26:35 2012] Error reading totcts from fullrun_mos2_xmm0554170101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 29 00:26:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 00:26:35 2012] Using photon index=1.80, rate=3.49, arf fullrun_mos2_xmm0554170101_pi300-10000_pass1_cl_src1.arf
[Tue May 29 00:26:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 00:26:35 2012] Updating source flux to 3.5e-11
[Tue May 29 00:27:44 2012] Reading fit data from xmm0554170101/analysis//spectral/fullrun_mos2_xmm0554170101_pi300-10000_pass1_cl_src1_pl.csv
[Tue May 29 00:27:44 2012] Spectral fit parameter nH value = 2.53384e+22
[Tue May 29 00:27:44 2012] Spectral fit parameter PhoIndex value = 1.55456
[Tue May 29 00:27:44 2012] Failed to get F(0.3-8.0) from xmm0554170101/analysis//spectral/fullrun_mos2_xmm0554170101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue May 29 00:27:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 00:27:44 2012] Using Nh = 2.5e+22, photon index=1.55, rate=3.49, arf fullrun_mos2_xmm0554170101_pi300-10000_pass1_cl_src1.arf
[Tue May 29 00:27:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 00:27:44 2012] Updating source flux to 8.2e-11