[Mon May 28 20:50:14 2012] Detection parameters:
  Position = (335.6, 384.9) = 14 13 2.29 -3 4 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.0 +/- 21.2
  Background counts = 168.9
  Rate = 0.003 +/- 0.0005

[Mon May 28 20:50:15 2012] Off-axis axis estimate = 6.83'
[Mon May 28 21:49:44 2012] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting
[Mon May 28 21:49:44 2012] Initial guess for spatial extent in simple fitting = 9.84"
[Mon May 28 21:49:44 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.983
[Mon May 28 21:49:44 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.84"
[Mon May 28 22:06:25 2012] fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_src7.ximg exists
[Mon May 28 22:06:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_src7.csv
[Mon May 28 22:06:25 2012] fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon May 28 22:06:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_src7.csv
[Mon May 28 22:06:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 22:06:25 2012] fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon May 28 22:06:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon May 28 22:06:25 2012] fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon May 28 22:06:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon May 28 22:06:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 22:27:30 2012] Spatial fit model total counts = 805.124000, observed total counts = 644.000000
[Mon May 28 22:27:30 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 28 22:27:30 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:27:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:27:30 2012] Assessing source extent using major
[Mon May 28 22:27:30 2012] Source does appear to be extended
[Mon May 28 22:27:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:27:30 2012] Deleting source due to low Poisson probability 0.9