[Mon May 28 20:50:14 2012] Detection parameters:
  Position = (379.2, 347.2) = 14 12 49.62 -3 7 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 967.8 +/- 42.0
  Background counts = 163.3
  Rate = 0.02 +/- 0.0009

[Mon May 28 20:50:15 2012] Off-axis axis estimate = 6.84'
[Mon May 28 21:49:44 2012] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Mon May 28 21:49:44 2012] Initial guess for spatial extent in simple fitting = 9.85"
[Mon May 28 21:49:44 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.178
[Mon May 28 21:49:44 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.85"
[Mon May 28 22:06:25 2012] fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_src2.ximg exists
[Mon May 28 22:06:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_src2.csv
[Mon May 28 22:06:25 2012] fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon May 28 22:06:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_src2.csv
[Mon May 28 22:06:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 22:06:25 2012] fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon May 28 22:06:25 2012] fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon May 28 22:06:25 2012] Fit fullrun_mos1_xmm0554170101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon May 28 22:27:30 2012] Spatial fit model total counts = 1520.120000, observed total counts = 1525.000000
[Mon May 28 22:27:30 2012] Offset between fit and detection position for source 2 = 0.181252 pixels
[Mon May 28 22:27:30 2012] 1519.377000 total counts/ 922.843000 bgd. counts: snr = 19.636826
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.181252 pixels
  Position = (379.1, 347.3) = 14 12 49.67 -3 7 20.3
  Extent = 6.1 (5.6-6.7)", rotation angle = 0
  Source counts = 596.5 +/- 39.0
  Background counts = 922.8
  Rate = 0.008 +/- 0.0005
[Mon May 28 22:27:30 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:27:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:27:30 2012] Assessing source extent using major axis lower bound
[Mon May 28 22:27:30 2012] Source does appear to be extended
[Mon May 28 22:27:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:36:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 22:36:50 2012] Initial guess for spatial extent in simple fitting = 6.12"
[Mon May 28 22:36:50 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.099
[Mon May 28 22:36:50 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.12"
[Mon May 28 22:46:50 2012] fullrun_mos1_xmm0554170101_pi300-10000_cl_pass1_src2.ximg exists
[Mon May 28 22:46:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554170101_pi300-10000_cl_pass1_src2.csv
[Mon May 28 22:46:50 2012] fullrun_mos1_xmm0554170101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon May 28 22:46:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554170101_pi300-10000_cl_pass1_src2.csv
[Mon May 28 22:46:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554170101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554170101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 22:46:50 2012] fullrun_mos1_xmm0554170101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon May 28 22:46:50 2012] fullrun_mos1_xmm0554170101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon May 28 22:46:50 2012] Fit fullrun_mos1_xmm0554170101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon May 28 22:56:37 2012] Warning, spatial fit 2 centroid is now closest to src. 7
[Mon May 28 22:56:37 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:56:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:56:37 2012] Assessing source extent using major axis lower bound
[Mon May 28 22:56:37 2012] Source does appear to be extended
[Mon May 28 22:56:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 23:47:03 2012] XMMSAS src. selection expression = ellipse(32928.942740, 30164.369400, 367.495811, 367.495811, 0.000000, X, Y)
[Mon May 28 23:47:03 2012] Writing source region out to fullrun_mos1_xmm0554170101_pi300-10000_pass1_cl_src2_src.reg
[Mon May 28 23:47:03 2012] Extracting stamp from image fullrun_mos1_xmm0554170101_pi300-10000_cl_sm2.00.img.gz, (358, 326) - (400, 368)
[Mon May 28 23:47:03 2012] XMMSAS bgd. selection expression = annulus(32928.942740, 30164.369400, 612.493018, 1224.986035, X, Y)
[Mon May 28 23:47:03 2012] Writing fullrun_mos1_xmm0554170101_pi300-10000_pass1_cl_src2.gif
[Mon May 28 23:49:31 2012] Mean detx,y = (-2574.90, -9479.63) 
[Mon May 28 23:49:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 23:49:35 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 23:49:36 2012] Setting source spectrum file to fullrun_mos1_xmm0554170101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 28 23:49:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554170101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue May 29 00:26:35 2012] Updating aperture counts using extracted products
[Tue May 29 00:26:35 2012] Error reading totcts from fullrun_mos1_xmm0554170101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue May 29 00:26:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 00:26:35 2012] Using photon index=1.80, rate=0.00792, arf fullrun_mos1_xmm0554170101_pi300-10000_pass1_cl_src2.arf
[Tue May 29 00:26:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 00:26:35 2012] Updating source flux to 1.7e-13