[Wed Jul 18 18:22:28 2012] Detection parameters:
  Position = (302.4, 106.3) = 10 45 33.29 58 46 36.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.8 +/- 23.9
  Background counts = 146.7
  Rate = 0.004 +/- 0.0005

[Wed Jul 18 18:22:29 2012] Off-axis axis estimate = 13.93'
[Wed Jul 18 18:26:43 2012] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 18:26:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 18 18:26:43 2012] Initial guess for spatial extent in simple fitting = 13.40"
[Wed Jul 18 18:26:43 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.956
[Wed Jul 18 18:26:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.40"
[Wed Jul 18 19:04:38 2012] fullrun_pn_xmm0554121301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 18 19:04:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554121301_pi300-10000_cl_pass0_src1.csv
[Wed Jul 18 19:04:38 2012] fullrun_pn_xmm0554121301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 18 19:04:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554121301_pi300-10000_cl_pass0_src1.csv
[Wed Jul 18 19:04:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554121301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554121301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 19:04:38 2012] fullrun_pn_xmm0554121301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 18 19:04:38 2012] fullrun_pn_xmm0554121301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 18 19:04:38 2012] Fit fullrun_pn_xmm0554121301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 18 20:10:56 2012] Spatial fit model total counts = 1010.740000, observed total counts = 1002.000000
[Wed Jul 18 20:10:56 2012] Offset between fit and detection position for source 1 = 0.162608 pixels
[Wed Jul 18 20:10:56 2012] 1010.408000 total counts/ 898.198000 bgd. counts: snr = 3.744083
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.162608 pixels
  Position = (302.6, 106.2) = 10 45 33.21 58 46 35.6
  Extent = 7.8 (5.8-9.9)", rotation angle = 0
  Source counts = 112.2 +/- 31.8
  Background counts = 898.2
  Rate = 0.003 +/- 0.0009
[Wed Jul 18 20:10:56 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 20:10:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 20:10:56 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 20:10:56 2012] Source does appear to be extended
[Wed Jul 18 20:10:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 20:11:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 18 20:11:12 2012] Initial guess for spatial extent in simple fitting = 7.84"
[Wed Jul 18 20:11:12 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.178
[Wed Jul 18 20:11:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.84"
[Wed Jul 18 20:46:16 2012] fullrun_pn_xmm0554121301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 18 20:46:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0554121301_pi300-10000_cl_pass1_src1.csv
[Wed Jul 18 20:46:16 2012] fullrun_pn_xmm0554121301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 18 20:46:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0554121301_pi300-10000_cl_pass1_src1.csv
[Wed Jul 18 20:46:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554121301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554121301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 20:46:16 2012] fullrun_pn_xmm0554121301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 18 20:46:16 2012] fullrun_pn_xmm0554121301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 18 20:46:16 2012] Fit fullrun_pn_xmm0554121301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 18 21:43:18 2012] Spatial fit model total counts = 481.988000, observed total counts = 482.000000
[Wed Jul 18 21:43:18 2012] Offset between fit and detection position for source 1 = 0.131663 pixels
[Wed Jul 18 21:43:18 2012] 478.875000 total counts/ 366.359000 bgd. counts: snr = 5.878423
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.131663 pixels
  Position = (302.7, 106.3) = 10 45 33.14 58 46 35.8
  Extent = 7.8 (5.5-10.1)", rotation angle = 0
  Source counts = 112.5 +/- 21.9
  Background counts = 366.4
  Rate = 0.003 +/- 0.0006
[Wed Jul 18 21:43:18 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 21:43:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 21:43:18 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 21:43:18 2012] Source does appear to be extended
[Wed Jul 18 21:43:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 21:43:34 2012] XMMSAS src. selection expression = ellipse(26287.439000, 9196.614600, 468.466213, 468.466213, 0.000000, X, Y)
[Wed Jul 18 21:43:34 2012] Writing source region out to fullrun_pn_xmm0554121301_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 18 21:43:34 2012] Extracting stamp from image fullrun_pn_xmm0554121301_pi300-10000_cl_sm2.00.img.gz, (276, 79) - (330, 133)
[Wed Jul 18 21:43:34 2012] XMMSAS bgd. selection expression = annulus(26287.439000, 9196.614600, 780.777022, 1561.554045, X, Y)
[Wed Jul 18 21:43:34 2012] Writing fullrun_pn_xmm0554121301_pi300-10000_pass1_cl_src1.gif
[Wed Jul 18 21:43:48 2012] Mean detx,y = (7141.22, -13119.08) 
[Wed Jul 18 21:43:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 21:44:08 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 21:44:08 2012] Setting source spectrum file to fullrun_pn_xmm0554121301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 18 21:44:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554121301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 18 23:01:37 2012] Updating aperture counts using extracted products
[Wed Jul 18 23:01:37 2012] Error reading totcts from fullrun_pn_xmm0554121301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 18 23:01:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 23:01:38 2012] Using photon index=1.80, rate=0.00333, arf fullrun_pn_xmm0554121301_pi300-10000_pass1_cl_src1.arf
[Wed Jul 18 23:01:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 23:01:38 2012] Updating source flux to 2.4e-14
[Wed Jul 18 23:02:59 2012] Reading fit data from xmm0554121301/analysis//spectral/fullrun_pn_xmm0554121301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 18 23:02:59 2012] Spectral fit parameter nH value = 3.19158e+21
[Wed Jul 18 23:02:59 2012] Spectral fit parameter PhoIndex value = 2.41921
[Wed Jul 18 23:02:59 2012] Failed to get F(0.3-8.0) from xmm0554121301/analysis//spectral/fullrun_pn_xmm0554121301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 18 23:02:59 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 23:02:59 2012] Using Nh = 3.2e+21, photon index=2.42, rate=0.00333, arf fullrun_pn_xmm0554121301_pi300-10000_pass1_cl_src1.arf
[Wed Jul 18 23:02:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 23:02:59 2012] Updating source flux to 2.8e-14