[Wed Jul 18 18:22:50 2012] Detection parameters:
  Position = (387.4, 210.2) = 10 44 45.60 58 54 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.7 +/- 20.7
  Background counts = 106.7
  Rate = 0.005 +/- 0.0007

[Wed Jul 18 18:22:50 2012] Off-axis axis estimate = 9.08'
[Wed Jul 18 19:04:38 2012] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 19:04:38 2012] Initial guess for spatial extent in simple fitting = 10.97"
[Wed Jul 18 19:04:38 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.985
[Wed Jul 18 19:04:38 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.97"
[Wed Jul 18 19:41:21 2012] fullrun_mos1_xmm0554121301_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jul 18 19:41:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554121301_pi300-10000_cl_pass0_src4.csv
[Wed Jul 18 19:41:21 2012] fullrun_mos1_xmm0554121301_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jul 18 19:41:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554121301_pi300-10000_cl_pass0_src4.csv
[Wed Jul 18 19:41:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554121301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554121301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 19:41:22 2012] fullrun_mos1_xmm0554121301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jul 18 19:41:22 2012] fullrun_mos1_xmm0554121301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jul 18 19:41:22 2012] Fit fullrun_mos1_xmm0554121301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Jul 18 20:10:59 2012] Warning, spatial fit 4 centroid is now closest to src. 17
[Wed Jul 18 20:10:59 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 20:10:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 20:10:59 2012] Assessing source extent using major
[Wed Jul 18 20:10:59 2012] Source does appear to be extended
[Wed Jul 18 20:10:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 20:46:17 2012] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 20:46:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 18 20:46:17 2012] Initial guess for spatial extent in simple fitting = 10.97"
[Wed Jul 18 20:46:17 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.985
[Wed Jul 18 20:46:17 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.97"
[Wed Jul 18 21:14:56 2012] fullrun_mos1_xmm0554121301_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jul 18 21:14:56 2012] fullrun_mos1_xmm0554121301_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jul 18 21:14:56 2012] Fit fullrun_mos1_xmm0554121301_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed Jul 18 21:14:57 2012] fullrun_mos1_xmm0554121301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jul 18 21:14:57 2012] fullrun_mos1_xmm0554121301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jul 18 21:14:57 2012] Fit fullrun_mos1_xmm0554121301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Jul 18 21:43:21 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 14.634997 pixels away
[Wed Jul 18 21:43:21 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 21:43:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 21:43:21 2012] Assessing source extent using major
[Wed Jul 18 21:43:21 2012] Source does appear to be extended
[Wed Jul 18 21:43:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 22:33:13 2012] XMMSAS src. selection expression = ellipse(33651.967407, 18234.813644, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 22:33:13 2012] Writing source region out to fullrun_mos1_xmm0554121301_pi300-10000_pass1_cl_src15_src.reg
[Wed Jul 18 22:33:13 2012] Extracting stamp from image fullrun_mos1_xmm0554121301_pi300-10000_cl_sm2.00.img.gz, (350, 173) - (425, 248)
[Wed Jul 18 22:33:13 2012] XMMSAS bgd. selection expression = annulus(33651.967407, 18234.813644, 1087.500000, 2175.000000, X, Y) && !ellipse(31941.627000, 19830.817600, 376.864811, 376.864811, 0.000000, X, Y) && !ellipse(32611.986600, 19059.414000, 1674.288048, 1674.288048, 0.000000, X, Y) && !ellipse(32893.053833, 16621.274017, 1740.000000, 1740.000000, 0.000000, X, Y)
[Wed Jul 18 22:33:13 2012] Writing fullrun_mos1_xmm0554121301_pi300-10000_pass1_cl_src15.gif
[Wed Jul 18 22:33:48 2012] Mean detx,y = (9120.25, -4154.58) 
[Wed Jul 18 22:33:49 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 22:33:57 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 22:33:57 2012] Setting source spectrum file to fullrun_mos1_xmm0554121301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Jul 18 22:33:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554121301_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed Jul 18 22:41:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 22:41:48 2012] rmf not generated due to insufficient counts
[Wed Jul 18 23:01:38 2012] Updating aperture counts using extracted products
[Wed Jul 18 23:01:38 2012] Error reading totcts from fullrun_mos1_xmm0554121301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Jul 18 23:01:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 23:01:39 2012] Using photon index=1.80, rate=0.00496, arf fullrun_mos1_xmm0554121301_pi300-10000_pass1_cl_src15.arf
[Wed Jul 18 23:01:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 23:01:39 2012] Updating source flux to 8.7e-14
[Wed Jul 18 23:01:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting