[Thu Jun 14 10:09:21 2012] Detection parameters:
  Position = (384.1, 219.6) = 10 44 51.83 58 54 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.2 +/- 7.6
  Background counts = 5.5
  Rate = 0.004 +/- 0.0009

[Thu Jun 14 10:09:21 2012] Off-axis axis estimate = 8.44'
[Thu Jun 14 10:48:54 2012] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:48:54 2012] Initial guess for spatial extent in simple fitting = 10.65"
[Thu Jun 14 10:48:54 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Thu Jun 14 10:48:54 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.65"
[Thu Jun 14 11:08:29 2012] fullrun_mos1_xmm0554121001_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jun 14 11:08:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554121001_pi300-10000_cl_pass0_src5.csv
[Thu Jun 14 11:08:29 2012] fullrun_mos1_xmm0554121001_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jun 14 11:08:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554121001_pi300-10000_cl_pass0_src5.csv
[Thu Jun 14 11:08:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554121001_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554121001_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 11:08:29 2012] fullrun_mos1_xmm0554121001_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jun 14 11:08:29 2012] fullrun_mos1_xmm0554121001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jun 14 11:08:29 2012] Fit fullrun_mos1_xmm0554121001_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jun 14 11:21:59 2012] Spatial fit model total counts = 85.895100, observed total counts = 87.000000
[Thu Jun 14 11:21:59 2012] Offset between fit and detection position for source 10 = 1.073050 pixels
[Thu Jun 14 11:21:59 2012] Warning, changing simple spatial fit ID from 5 to 3
[Thu Jun 14 11:21:59 2012] 83.457700 total counts/ 83.457700 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.073050 pixels
  Position = (384.4, 220.6) = 10 44 51.66 58 54 49.8
  Extent = 2.5 (2.5-38.2)", rotation angle = 0
  Source counts = 0.0 +/- 9.1
  Background counts = 83.5
  Rate = 4e-13 +/- 0.0007
  Deleting source due to low Poisson probability